Name of the system of the interconnections of fabric can be changed

Similar Questions

• Why the interconnections of fabric can be connected to the two MDS?

  Hi all

  1. why the white paper below says that if FI is connected to two MDS, then it will create a single point of failure?

  http://www.Cisco.com/c/en/us/products/collateral/storage-networking/MDS-9500-series-multilayer-directors/white_paper_c11_586100.html

  This image below is used to describe the scenario for question 2 to 4.

  San.PNG

  

  2 and why the SAN design best practices to create SAN A and SAN B? Where when the switch 1 has failed, then it will use the b in SAN. And in this case, user can configure to connect to the storage using SAN B first, instead of using SAN first? And by default, the behavior of the SAN like that, what I mean is that she will check SAN failed, then it will use SAN B?

  3. and why there is no connection between the left more server and switch 2? They can not who design when switch 1 has failed, then it will use the other link first to switch 2, by linking the left more server for 2? Then when the core SAN switch one down, he uses the SAN B connection.

  4. can you the server to different SAN multipath? In this case, SAN A and B.

  Thank you

  Osbin

  Hi Osbin,

  Why the white paper below says that if FI is connected to two MDS, then it will create a single point of failure?

  Protocol FC build tissue, using the FSPF (such as OSPF) of the Protocol in order to MDS, FI (switch mode) Nexus 5 k, 7 k (storage VDC) form a single fabric using the links intercommutation.

  If a problem is occur in tissue alone device's problem (zoning, FSPF, EENT)

  If you connect fabric and fabric B (connect a FI for switch 1 and switch 2) in other words, this is no fabric A and B - it became a unique fabric (fabric single = single point of failure). That's why we use two FI, connected to two independent fabrics (isolation and redundancy)

  Technically, you can avoid this problem by using VSANS, but if some problem in a NX - OS or SAN - OS occure you may lose the two fabrics in a single failure (the worst of the world SAN)

  2 and why the SAN design best practices to create SAN A and SAN B? Where when the switch 1 has failed, then it will use the b in SAN. And in this case, user can configure to connect to the storage using SAN B first, instead of using SAN first? And by default, the behavior of the SAN like that, what I mean is that she will check SAN failed, then it will use SAN B?

  Point main initiator is in the answer above, can use both at the same time (multipath) fabrics with special drivers.

  It is configurable by the user to use any fabric (A and B - is just for engineers) first.

  It depends on the OS and drivers.

  3. and why there is no connection between the left more server and switch 2?

  I believe that this picture is schematic diagram and imagine if you have enough ports in the switch 1

  They can not who design when switch 1 has failed, then it will use the other link first to switch 2, by linking the left more server for 2?

  Remember the idea of FC fabric. If you spend 1 it will affect every single switch fabric, and it is much faster to use stable fabric B instead of A fabric converging.

  Then when the core SAN switch one down, he uses the SAN B connection.

  4. can you the server to different SAN multipath? In this case, SAN A and B.

  Yes

  Best regards

  Alex

• I bought my computer from someone else. Change user accounts did not name of each file in the computer. How can I change or remove the user/name (my name) /document? __

  I bought my computer from someone else. Change user accounts did not take their name off of each (or more) file in the computer. How can I change or remove the user/name/document
  I have looked everywhere and changed user information and the name of the administrator. What can I do else?

  Hello flashgordonjxn,

  Who has ever done the installation of Windows, the installation program asks you to enter your name and optionally, the name of the organization. These registration information appears under recommended for in the general tab of the System when you click Start, click Control Panel, click performance and Maintenanceand then click System.

  To change see instructions below:

  1. Click Startand then click run.
  2. In the Open box, type regedit, and then click OK.
  3. Look for the following registry key:
     HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
  4. To change the name of the company, follow these steps:

     In the right pane, double-click RegisteredOrganization. Under value data, type the name that you want, and then click OK.

  5. To change the name of the registered owner, follow these steps:

     In the right pane, double-click RegisteredOwner. Under value data, type the name that you want, and then click OK.

  6. Click Exit on the file menu to exit the registry editor.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  How can I find the name of the photographer? How can I know the location of a photo when it's just a general title...

  Hello

  If you expand the keywords, this could give you a little more in detail.  You can click on the username of the photographer to see their portfolio and you can search within their portfolio.

  Thank you

  Bev

  

• I have outlook express and the spell checker is for the French. How can I change this?

  I have outlook express and the spell checker is for the French. How can I change this?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I converted a PDF file to word.  Can I change the words, but not the page.  I can't change the margins. If I delete a picture of the page, space where the image is unusable.

  I converted a PDF file to word. Can I change the words, but not the page. I can't change the margins. If I delete a picture of the page, space where the image is unusable.  Can someone help me please? Gary

  Thank you, Gary!

  I appreciate your comments! Start with the basics: Getting Started with ExportPDF

  And here's a more complete step by step (that you already know, but I'll give the full game!):

  1. Sign in to your account on https://cloud.acrobat.com/exportpdf.
  2. Click on PDF files select export.
  3. Click on choose the files on my computer.
  4. Select one or more files and click on choose (you can select multiple files by pressing the Shift or Ctrl key when you click on the file).
  5. To convert to the: menu popup, select the output format you want (in this case, Microsoft Word).
  6. Let the language of the local menu Document configured to English (unless the PDF is in a foreign language).
  7. Click Export to Word. (The name of this button will vary depending on what format you selected in step 5)
  8. Once the file is converted, it will appear at the bottom of the window, listed under exported files.
  9. Hover your mouse over the thumbnail image of the file, and then click the icon that appears on the left side of the thumbnail to download the file in your downloads folder. (You can also click on the files tab in the upper part of the window to see a complete list of all converted files).
  10. Once you have downloaded the file, you can open it up in Word for editing.

  I hope this helps! If this isn't the case, you know where to find me!

  Best,

  Sara

• in the photos on macbook pro installed yosemite pictures have a letter J in the corner and I can't change them

  Some of my photos have a letter "J" in the corner, and I can't change them with photo-editing tools. Someone knows why?

  The letter 'J' means that the photo is part of a pair of "GROSS" and "JPEG", and the JPEG file has been selected as the original image file.  If the RAW file is selected as the original, you would see an 'R' in the corner.

  What exactly happens, when you try to change these photos? You get a message from a missing file? Or what's happening?

  Try to pass the original JPEG on the original RAW.  Open the image in EDIT mode, if you can and then use the command "Image > use RAW as the Original. This command is only available in edit mode.

  

• Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications

  Old ID is constantly on the phone and I can't change it: try to upgrade of storage, but the old ID happens and I can't change it.  In settings/applications & iTunes the correct ID is set but not in the settings/iCloud

  Is this a separate id, or you have successfully updated the primary e-mail address on the account? You can disconnect an account iCloud through settings > iCloud > Sign Out, and then log back from the other/updated id to update

  If you have updated the main email address: what to do when you have changed your Apple ID email address or password - Apple support

• When I drag an image URL, such as for Amazon to the dock, changes the image to an image any ordinary of the world.  How can I change this image to the original Amazon icon image when turned on the docl?

  When I drag an image to icon URL, such as for Amazon to the dock, changes the image to an image any ordinary of the world.  How can I change this image to the original Amazon icon image that existed before I moved to the docking station?

  Why do you want to put the URL in the Dock, which doesn't seem like the appropriate place for this.

• When I m I look at an image or another document, after a time (short term) the screen go to the home page, how can I change the time if I don't have this problem?

  When I m I look at an image or another document, after a time (short term) the screen go to the home page, how can I change the time if I don't have this problem

  Hi, Romulo,

  This question should be validated in the Internet Explorer Forum.  Note the drop-down menus.

  http://answers.Microsoft.com/en-us/IE/Forum

  What sites you encounter the problem with?

  Make sure flash player is the current version

  http://www.Adobe.com/software/Flash/about/

  Check Shockwave player is the current version

  http://www.Adobe.com/Shockwave/welcome/

  Check the Java version

  http://Java.com/en/download/installed.jsp

  You check the internet connection

  If you are experiencing network connectivity problems in Internet Explorer, the first thing to do is to make sure that all cables are connected. Then open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair (if you use Windows Vista) or solve problems (if you use Windows 7).

  If the problem persists, see the following articles:

  • Network connection problems
  • How to troubleshoot network connectivity problems in Internet Explorer
  • The problems of Internet connection
  • Internet Explorer error "connection timed out".
  • Why is my Internet connection so slow?

• I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images

  Hello

  I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)

  Now, I see the image preview and it disappears to the flower, so I did not see one of my photos

  Some would like TO help on this im so not good with this kind of thing.

  Appreciate it in advance

  Let

  Hello

  • When you change the format of images of?
  • What is Windows Explorer or Itunes?

  Try the TV activation

  Enabled and disable the Option 'show window previews (thumbnails) '.

  a. right click on the taskbar.

  b. Select Properties.

  c. check show window previews (thumbnails) "Option. .

• Only windows 7 can set the image of the user that appears in the start menu you can not change it. True or false?

  Is true or false. Only windows 7 can set the image of the user that appears in the start menu you can not change it.

  Set to false.

  Type the user accounts in the start search box.

  Press ENTER.

  Select change your image.

  Browse the picture than what you want.

• Hi can someone help me... I try to open my photos of microscope and all of them are just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is

  Hi can someone help me... I try to open my microscope fluorescnece images and they are all just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is gray and the merged image color space is RGB)

  Try to update your video card driver to exclude

  Then reset your preferences - with Photoshop CC you can do it in the preferences. Earlier versions require that you press the modifier keys that you launch Photoshop. Ctrl alt shift on Windows or cmd opt shift on Mac.

• Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank y

  Hi, I have to Malaysia, I'm trying to load down the lightroom and cc photo shop trial for the test. but after installation I know is English version! for me, I want to use the version Chinese, how can I change the version English version Chinese. Thank you

  Hi Alexl2684899,

  Please visit the below mentioned link:

  Change the language of Adobe Creative Cloud applications

  Let us know if that helps.

• When I press the left side of the mouse without grid appears in the photo. I can't change anything without a grid. You can

  When I press the left mouse on an image without a grid appears in the photo. I can't change anything without a grid.

  Choose the crop with these settings tool in the Options bar, and the left click will work for you