Navigate to a web page OBIEE 11 g

Similar Questions

• Navigate to a Web page from the pictures stored outside

  I have a flash piece that chages just the image displayed on the screen. The images are stored extrenally if I can easily change out them occasionally.  It is possible to navigate to a web page, if you click on an image? If so, how is that contradict or you can direct me to where I can find how to do this? Sorry, if this is a basic question, I'm kinda a rookie.

  Thanks for your help.

  Kate

  Your stupid bet is to place the image into a movieclip and affect the code by clicking on to the movieclip.  The code you assign depends on what version of Actionscript, you use.  So depending on who it is, try searching Google is:

  «getURL AS2»

  or

  "AS3 navigateToURL.

  and you can try adding "tutorial at one of these institutions.  They can meet in the Flash help documents if you look here, perhaps with a few examples.

• Have webapp find more new version of the Web page.

  Hello

  Is it possible to have a webapp always load the latest version of a Web page? I currently have a webapp pointing to my localhost. However, every time I change the playbook localhost navigates to older Web page.

  Thank you

  Aho

  Maybe https://developer.blackberry.com/html5/apis/ApplicationCache.html

• Go to the web page does not (at least OBIEE)

  Gurus,

  I'm climbing down an analysis (on Page 1) the second analysis (at Page 2) and must pass some parameters.

  According to the Oracle documentation below, this should work if I mention URL like:

  Column->-> Action links Interaction properties-> go to Web Page

  URL:

  Analytics/Saw.dll? Dashboard

  Saw.dll? Dashboard

  But none of them work.  Shows when I zoom on the value, in the next screen, the browser address bar: http://Analytics/saw.dll?Dashboard and says Page not found.  Browser fails to add the name of the server in front of the URL.

  Shelf v10.1.3.2: SEO Dashboard Content in external portals or Applications using the Oracle BI presentation...

  Are there additional requirements for this exploration work seamlessly?

  Thanks for all the inputs.

  Try: OBIEE 10 G / 11 G - pass is reflected in the go and the Dashboard URL [Gerardnico]

• How to stop streaming music becomes interrupted each time I have navigate between Web pages?

  Hello

  Can someone help me? I have laptop HP compaq-ish (250 GB CQ62), which I use for the two WIFI internet surfing and the listen/streaming music a lot (youtube / grooveshark / bearshare etc.). I tend to use IE9, Firefox and google chrome browsers, but the problem I have with them is, whenever I'm in Internet music streaming, and separately, internet browsing, whenever I click on a new Web page, the music is momentarily interrupted, a fraction of a second after I clicked. Several clicks means several interruptions, which is infuriating!

  Is there a way I can stop these interruptions? More cleaning of mobile memory space would make a difference (its on a full quarter), or is it to do with bandwidth instead? Or is it just my laptop makeup?

  Thank you very much!
  bronzeharness

  Bronzeharness, welcome to the forum.

  Looks like you have bandwidth problems.  When you try to complete several tasks of the connection Internet can not just keep it up.  You can contact your ISP to see if they can give you ideas on how to solve the problem.  There may be some parameters that can be changed to help.

  If your problem is solved, please click "accept as a Solution.

• The shading on the Web pages is not displayed in firefox 21.0

  I can't get firefox 21.0 to show any shading on web pages. I had to use chrome to navigate because I can't tell where the dialog boxes. I have pictures of the problem, if anyone can help please. I tried safe mode and it does not help. JavaScript must be enabled.

  It's lack of shading http://i1315.photobucket.com/albums/t596/khackee/firefoxnotok_zps823da505.jpg firefox

  It comes to chrome on the same page, it seems ok
  http://i1315.Photobucket.com/albums/t596/khackee/chromeok_zps8816496f.jpg

  Hello, I think that the site is displayed in this way because you have switched on the theme high contrast in Control Panel/appearance settings window.

• Firefox crashes several times in safe mode and out when I try to visit Web pages

  Whenever I try to visit Web pages, it crashes. Google, sometimes, or any whatever I click on google, at all. Constantly. As you can see on the accident of IDs, it crashed AGAIN and AGAIN and again. just about everything it crashes.

  Interesting to note, however, is that things off internet does not crash it. I was able to open the page of accident reports and assistance; Troubleshooting the thing without any problem.

  It's infuriating, because I can't navigate with mozilla at all, and I don't really like chrome.

  EDIT:
  Please note, other browsers do not do this. At least, chrome is not, I don't have IE.

  It is a problem with the BL2011. DLL file.
  
  Search Google suggest that the file can be a part of the malware (trojan).

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Why can I not use the tab key to highlight the links on a Web page?

  In previous versions of FF and in other browsers, I use the tab key to navigate through all the links on a Web page - I can't do this with FF5, the tab key will highlight only the address bar, search bar, and any form of fields on a Web page.

  Using the button tab to navigate through the links on a page is an accessibility feature, and I use it often to display links to jump hidden at the top of a Web page for users who prefer the keyboard on a mouse and assistive technologies.

  Is this something that can be turned on in the preferences? Or is there a reason why it has been removed from this version?

  It can be fixed in Mac OS X Tiger preferences (keyboard-> "all controls") or try a ctr - F7

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• How to change security settings, avoid attention "do you want to only display the content of the Web page which was delivered safely.

  Every time I navigate to a new site, I get the following security WARNING "only want you to view the contents of the Web page which was delivered safely. This Web page contains content that are not delivered using a secure HTTPS connection, but likely to compromise the security of the whole Web page. "How can I configure my system so that it does not constantly jump upwards? It's boring as can be! Any help is greatly appreciated! I use Windows XP.

  Go in Panel > Internet Options > Security tab and click on custom level, scroll down to the Miscellaneous section and mixed content display change Prompt to Activate, click OK and click OK , restart your browser.

  I hope this helps.

• Resize photos to send to the web page.

  I need to reduce the size of my photo to send to web pages such as Facebook and Craigslist. I'm not send photos by email. How can I do this? I have Vista Home Premium. Thanks for any help you can give me.

  I need to reduce the size of my photo to send to web pages such as Facebook and Craigslist. I'm not send photos by email. How can I do this? I have Vista Home Premium. Thanks for any help you can give me.

  =======================================
  In Windows Live Photo Gallery... Right click on one or more
  selected inches... Choose... "Resize" in the menu. Choose
  one size, navigate to a folder to save in left click the ' resize
  Save "button. (I suggest that you save the resized pictures
  in a new folder to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  And... you'll love the next free loop:

  VSO Image Resizer - (Windows XP/Vista/7)
  http://www.VSO-Software.fr/products/image_resizer/

  VSO Image Resizer (tutorial)
  How to resize my images and photos?
  http://www.VSO-Software.fr/products/image_resizer/how-to-compress-photos/how-to-resize-images-Guide.php

  Prish Image Resizer - PowerToy for Windows XP/Vista/7
  http://prishcom.spaces.live.com/blog/CNS! 6A6A204ABDF15411! 128.entry

  Prish Image Resizer tutorial)
  http://www.Winhelponline.com/blog/Prish-image-resizer-PowerToy-Windows-XP-Vista/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Credits go to the Web Page

  Hi all

  I have a requirement where I need navigate to the report BI Publisher report BI answers using "Naviagte to Web Page" Option in the action links.

  BI Publisher for the URL: http://192.168.168.26: 9704/xmlpserver/ODI/Report.xdo

  It works very well. But when I migrate from one environment to the other reports, I needed to change the action links to the report.

  How can I give a relative URL instead of the absolute URL... The IP address must be dynamic...

  Please let me know your suggestions.

  Hello

  You can use a URL alias.

  Follow this

  http://docs.Oracle.com/CD/E23943_01/bi.1111/e16364/actions.htm#BIEIT1674

  Felipe Idalgo

• Mobile 'Call' function on the web page

  Hello! Almost ready to publish Web pages, I have a button 'Call' inserted into a thumbnail that links to another page in the site.

  Is it possible to activate this button, dial the number on a mobile Web page? Or at least

  Show number immediately when they are affected so that the user can activate call, rather than having to navigate to the contact page?

  Thank you, Jon

  Hello Jonrees1978,

  Click on the button and update the "links section" of the properties panel with Tel: 555-555-5555 and it should work for you.
  Replace 555-555-5555 by a number of your choice.

  

  Please let me know if you are talking about something else.

  Kind regards

  Vivek

• Link on the Web page does not work in published HTML project

  I use 8.01 Captivate and created a project with a link to a URL of page web (I did by the insertion of the text links).  It works perfectly when I publish as an executable.

  Customer has requested that we publish now in the form of HTML/SWF file.  The link URL (set to open in a new window) does not this version.

  I changed the link at a click box with the action to open the web page in a new window.  Again, it works when you publish an executable file, but not when I publish to HTML.

  The OUTPUT of course links also do not work in the HTML version.

  We use IE11 to launch the HTML file.

  Any help will be greatly appreciated!

  Thank you!

  Hi Betty,.

  It seems to be a problem with the Flash security settings.

  Please follow the steps (these steps are for Firefox and IE) below:

  1. Publish the project to a folder on the c drive.
  2. Open the html of the published output.
  3. Do the right click on the screen and go to global settings.
  4. Go to the advance tab.
  5. Scroll down and click on trusted location settings.
  6. Click Add > add folder and navigate to your published folder and add it. (You can also add full lecteurC so that you don't have to do it again for all projects)
  7. Click on confirm and then close it.
  8. Now, re - open the html file and try to view attachments.

  These parameters are only made when you view the content locally. If you place the output on any server, then you must not make these settings.

  Hope it works... !

  Kind regards

  MILIN

• Why Chrome can not find the Web page when previewing in the browser?

  HI -.

  It's pretty weird to me.

  I can get a glimpse of any site I've been working on the use of any browser I have except Chrome (version current 33.0.1750.152).

  For example - when I use the preview in browser - Chrome says "the Web page is not found" - is the path to the page:

  file://external-drive/_PROJECTS/client/_FILES-from-client/_SITE-031614/index.html

  My next step is to manually navigate the page using file/open Chrome.  It works perfectly, but when the page is displayed that the path is different:

  file:///volumes/external-drive/_PROJECTS/CUSTOMER/_files of customer/_SITE-031614/index.html

  This second way is the same path in line to manage the Site Sites/Site/Local folder.  All other browsers (FFox, Safari, Opera) use this second path.  But for some reason, Chrome has shortened the path to a wrong address.  Weird!

  I don't think that this is related to the Mavericks, because it was going on before this upgrade.

  Anyone had this happen?  Can someone explain how can I fix?

  TIA your insight.

  JL2

  BTW - other details:

  Dreamweaver version 12 (CS6), Mac OS X 10.9.2.

  Chrome does not open your webpages from Dreamweaver if the files are on your USB. If you put your files on your computer (on your desktop, for example), Chrome will open your file in the browser via "Preview in browser". I hope this helps...