Navigation of the native page in the articles?

Similar Questions

• navto other pages of the article does not

  I've encountered a problem that I think I know the solution, but I'd throw out there to see if anyone has a workaround solution before thinking says solution.

  I have a folio for iPad viewing that will probably be used to share via Content viewer.

  The folio is a horizontal orientation only and consists of a single InDesign article with pages 14 or while I set swipe horizontal only (currently). On each page, there is a State two MSO that serves as a navigation to the other page. For example, when the user click on a magnifying glass icon (with a fill not any trait don't button top in quality of State 1 of ASM) it opens the nav Panel (State 2 OSM) other non - fill there is no button stroke during an 'x' to close the nav Panel (returning to the State 1 IE the Panel not visible nav - just the magnifying glass icon)

  This nav Panel 2 State of the OSM has a scroll with the buttons navto frame: ING other pages in the article by using the go to page navto (navto://articlename#1)

  This MSO Group (with buttons) is then copied and pasted on each InDesign doc page.

  These buttons work fine, but the navigation takes me to the wrong page when hit in any page of bar page 1. For example in the page 1 (title page) when I type navto://articlename#4 it takes me to the right page, but when I type navto://articlename#6 or #7 (or any other page number) it does not take me to the correct page I want to go.

  I suspect indesign is getting confused as he tries to navigate to a page to another page in the same InDesign and the numbering system is getting messed up.

  Unless I can invent a work around, I guess I'll have to separate pages in separate articles and navto://articlename...

  I want to keep the navigation system of the DSO and I want it to be horizontal scan only I want also a wide belt and the shoulder straps of the 'front to the rear of the content' in working order.

  Thanks in advance, hope that I made things clear.

  Steve

  If you are on iOS or Windows do not use explicit page number. Use instead our new relative navto: / / function to put a simple link that always takes the reader to the following page: navto://current#next.

  See Digital Publishing Suite help | Overlays of hypertext link and button for more details.

  Neil

• Always enter in the article on the first page

  Hello

  I know, it was before, but I don't remember the answers or workarounds.

  The Folio when I leave an article on page x and then come to this article later, I'm still on this page x. I want to be on the first page of an article whenever I navigate on it.

  THX in advance

  Christian

  The short answer is 'impossible '.

  Sort of workaround: triple click on the top navigation bar resets all memory of the last visited pages and you send to the first page of the first section (cover page)

• How can I stop: 1) scrolling ads/info that remains on the page, even while I scroll down to the bottom. (2) new side tabs that appear at the end of the articles to tease the next articles?

  I have two questions. In the past months, some sites there are ads or facebook/twitter links that scroll and remain on the same page that I scroll down. I find distracting moving images and want to stop them. How? I saw another development that I get close to the end of an article, two tabs appear on the left and right of the screen who tease article previous and next. These tabs appear often on the top of the text of the article I'm currently reading, making it difficult to finish the current article. How to stop these tabs?

  for 1)
  Try using an extension "ad block", as a first step.
  Click on > > AMO search for "ad block"

  I use this one - https://addons.mozilla.org/en-US/firefox/addon/ublock-origin/

  for 2)
  You can try to use this extension - https://addons.mozilla.org/en-US/firefox/addon/umatrix/ - too complicated for me, I rarely see these stupid teases 'previous' and 'next' and my screen is wide enough so that they do not cover any text I read.

• My navigation links on some pages and not on others. All bearings have a link page, in the master page.

  My navigation links on some pages and not on others. Only 2 of my 7 links work on the home page, 6 of the 7 work on another, and on other pages, they work. They are all together in the master and are linked to their corresponding page. No idea why?

  Layers. There is other content on top of your navigation. Even the transparent part of the other objects will block the mouse events to reach your NAV.

  At this point you probably just 'Layer 1' in the layers panel. Content on the layer 1 on the master page will always be behind the content on the layer 1 on the page to that master is applied.

  Create a 'layer 2' (which will be on top of the layer-1) and go to navigation. Now the navigation will be on top of the element on the layer 1 on your page and these elements will block are more mouse events to reach your NAV.

• A child page carry the status parameter menu navigation of the parent page?

  Hello. Newbie here.

  I used the menu widget to create a navigation bar with my pages four high-level, set their State normal-rolling-down-active as you wish, and it works very well with these top-level pages. However, I have about ten child pages under one of the pages more high level. When one of these child pages is active, the status of link to its parent page is not used. The link is in its normal state.

  Is it possible to have the status of a parent page navigation link apply to child pages to the title of this page?

  Example: Four top-level pages are HOME, COLLECTIONS, ABOUT, CONTACT.

  COLLECTIONS has ten pages of child, and I try to have the COLLECTIONS navigation link must be in its active State for all the child pages. Possible?

  Thank you very much.

  Hello

  It comes by default as only the current page will retain the set active state.

  We already have that in our list of features.

  Thank you

  Sanjit

• Landing on the top/premier page when you scroll the articles?

  I searched the web for the answer to my question, but was unable to find a solution.

  Adobe DPS has a feature that, when scroll (horizontally) the items, makes the Viewer always land on the first page of the article? Instead of landing on the page previously displayed in this article.

  Laughing out loud

• The animation playback of EDGE before coming to the page in an Article

  Hello

  I've created an animation on BOARD, and he plays before entering the page in an Article.

  I created other animations and places in articles and other folios, but on this point, it does not play correctly. I wish she could play to enter the page or go to the page. but, when I enter the page already has palyed. Maybe you have some advice or answers?

  Thank you

  L

  The overlay play when article is preloaded. To resolve this problem, set a small delay of 0.125 second.

• pages in the article are "stuck" - will not be routinely flip

  I have a folio with several articles (portrait only) using 'page wink' to scroll vertically through the article. But in some places in the article that the page crashes - it will not scroll to the next page. After several attempts, it will finally jump to the next page. In fact, you can scroll up to - holding page - and you can't even see the top of the next page - as if it were the end of the article. But even once, it will reverse eventually on the next page.

  I deleted the folio and tried again and there is no change. I think that it is related to overlays because when I remove all overlays and download the folio, the pages flip as they should.

  Any help would be greatly appreciated.

  You touch a known issue with the v22 Viewer. It is fixed in v23, but Apple has not yet approved this version of Adobe Content Viewer.

  Neil

• An error occurred updating the provisions of the article. The InDesign for page layout file can not be...

  When you try to complete the tutorial for indesign, I get the following error when you try to add an article to my folio:

  "An error occurred while updating the provisions of the article. The InDesign for page layout file is not found. »

  I am able to create the folio then I click into articles. My 'WiFi_v.indd' document is opened by clicking Add article, but I get this error message.

  I use the following versions of the software (should be later).

  -Folio Builder (downloaded version Version 1.1.8.0)

  reported version:

  11.4.3.20111129_m672305 7.5.5.17

  Adobe Design 7.5.2 CS 5.5

  Also tried to reinstall the plugins (uninstall and install)

  Ok.

  Sometimes I have some problems with the mounted network volumes.

  When dismantling and then it works again.

  Try dismantling of unnecessary volume and try again.

  Or try local labour and unmount all volumes of network.

  We hope that you will get to work.

  BR

  Henrik

• Get & quot; Navigation to the page Web has been cancelled & quot;

  Repro:
  1. create a chm file in RoboHelp 7 HTML.
  2. it works when I open HR or open the .chm, as you have it saved in My Documents > MyRoboHelp project > project name >. SSL! > projectname.chm.
  3. copy the file to a different location (such as a network drive).
  4. when I go to open, just get the "shell" the file opens with the table of contents, but all pages display message "Navigation to the webpage was canceled".
  
  
  What is happening with this? I don't know even where to start troubleshooting. I don't get the error messages in the compilation.
  
  Thanks, Leisa

  Hi there Leisa

  Please take this in the way in which it is intended. (read with humor) Where you from years past? Microsoft made a change for years who did overflow feature CHM when you try to run from a network location.

  If you wish, you can change the behavior. But that means security to relax a bit. More can be found at this link.

  See you soon... Rick

• Automatically switch to the next Page of an Article

  I am trying to create a splash screen, like the opening of an article. Once the animation, layering html with html, css, js animation, has finished playing, I would like to switch to the opening of the article without requiring any intervention from the user. I'm trying do not add a button.

  Is this possible?

  Use a car running MSO. The first State is the intro. The second section opens. Set it to play once and stop image finally.

  The timing depends on how long the animation takes to play.

• Hide the bar of Navigation from the top + bottom fashion Folio

  Hi all, it is possible to hide the top + bottom mode Folio Navigation bar (always)?

  I need this for a simple editing for child application.

  I remember that it is possible with professionals?

  Thank you very much!

  With a Pro account or business, you can hide the top navigation bar, but not the lower navigation bar. The workaround is a place a dummy ESM invisible on each page and add navigation buttons. For an example, see the article of last second DPS tips > Advanced overlays.

• my web site does not load the bar of navigation on the site, but the fact on all other browseres!

  www.funfactorypartyrentals.com a few days ago the site as working perfectly on firefox now however the navigation between the logo one bar the row of photos does not appear on one of the cables pages it indexes to all others he will ignore this line of code or something is blocking, I'm tired everthng to solve the problem, but nothing seems to work.

  It is not a problem with the font-size rules.

  See line 102 of the http://www.funfactorypartyrentals.com/ffpr.css

  It's the font-size-adjust rule.

• My research have adds and a lot of text in the articles is adds insertion of links to more crap.

  All of a sudden my searches and pages I'm going to have a lot more intrusive adds than ever before. The texts in the articles I want to read have all these crazy links. Even accidentally hover the causes to open many more add pages. very frustrating. What is going on? How can I fix it?

  The detected forum software your Firefox as version 19. Is this correct?

  Version 19 is not safe; Mozilla reveals security flaws after each new version. Is something holding you upgrade to Firefox 28? Please let us know if we can offer you solutions or workarounds.

  If help > about Firefox shows Firefox 28.0 you may need to disable the preference that is misrepresentation of your version number. See: sites say that Firefox is obsolete or incompatible, even if it's the latest version.

• How to print the article without printing all comments

  I like some of the articles I find on many Firefox news and I like to print them and send them to my friends who do not have the chance to have a computer. The problem is when I try to print the article, it does not stop when the article is finished but continues to print, sometimes nine or ten pages of comments using the way to much ink, for the comments I did not even want. How can I print only the article without comment? I know that this is probably a personal computer and printing skills but someone can help me?

  First thing is to look for a print or printer ready on the Web page button. On the web pages stretch on several pages many times, there is a link at the bottom of section to View Pages or View the entire Article. Problem with the help of these is that the images are usually deleted, only the text of the article is printed. Useless if you want to print is a step by step 'how to' article where images are needed.

  Second, I use the add-on print change to see a preview of what will be printed, and change what I want not printed.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  Not necessary, but Adblock Plus and NoScript are useful, too.
  
  NoScript blocks generally comments of appearing even in the title of an article, and Adblock Plus will block most advertisements on page load, resulting in much less to change when you go to print web pages.