NB500 - slow performance - how to make it faster?

Similar Questions

• Slow Equuim A200 - how to make it faster?

  Help!

  My Equium A200 went really slow. Get messages don't respondents on the internet.
  Even typing is very slow. I m not very knowledgable about computers but do not follow security updates.
  Please help me if there is anything I can do.

  There are many options to make Windows faster.
  I can give you some examples:

  1. check the msconfig: start = > run = > msconfig.
  At startup, you can see all programs that have started with Notepad. Remove the tick from the programs, they should not start with Windows.

  2 defragment your HARD disk: click my computer = > right click the disk HARD = > properties = > tools = > defragment now.
  Defragmentation is a process that reduces the level of fragmentation in file systems.
  What operating system (operating system) do you use? If you are using Windows Vista, install the SP1. If you use Windows XP, install SP2 or SP3.

  In my opinion Windows OneCare is not really good. Choose another suite of security. I use for many years Kaspersky. I never had problems with it and the system runs fast.

  To check how much RAM you have, make right click on my computer = > properties and there you can see.

  If everything does not help you, you must reinstall Windows with the Toshiba recovery image. All the drivers and tools are particularly.
  But if you do so, back up your data first. The HARD drive will be erased.

• Equium L20: very slow performance - how do I speed it up?

  This is probably a really stupid question, but I'm not a techie. My L20 got really really slow... it has never been super fast at first, but now it's really bad.

  I defrag and clean the drive regularly (once a fortnight) and it's really only used to access the interest for the moment.

  Any advice on how to speed up a bit?
  Regards Robert

  To be honest, you did the right thing. Defragmentation and HDD cleaning should help performance.

  It will be interesting to know what is CPU and HARD disk activity while surfing the Internet. Have you noticed ongoing activity of HDD or maybe high CPU load?

• HP Pavillion MS235: HP Pavillion MS235 All in One - how to make it faster?

  I would like to make the PC faster.  We had for some time, there isn't much about it then, but I would like to give to my son for his school work and games.  It's just slow.  Everything you do, takes so long.  No viruses have WebRoot on it.  Any ideas or advice?

  The concept of the IOA is done for convenience. I look at the specifications.  Its processor is a 1.6 Ghz chip, RAM (memory) is maximum at 4 GB. It has never considered a game machine with this configuration.  You can not change anything.

• How to make games faster

  I currently have a desktop computer HP Pavilion S5310f with Windows 7 Home Premium 64-bit. It has 4 GB of RAM (3.75 usable), a 640 GB hard drive, two AMD Athlon II 3 GHz processors and a NVIDIA GeForce 6100 SE 256 MB memory dedicated graphics card and the CUDA technology. My question is this: How can I dedicate more memory system, tell the graphics card 1 GB instead of 1/4 GB, so that I can play better games than before. My computer is not a computer game, but I can still play in recent games, but quality must be placed down to the bottom and there is lag. If it is not possible, I should just by a different graphic card? How are you going to those looking for? And he comes into conflict with the current (can you have more than one graphics card?)

  I'm not an expert in the game, but I think that there is little to choose between ATI/AMD (AMD owns now ATI) and maps NV, as long as they are put in correspondence spec wise (see maps).

  Choose what best meets your needs for the best cost, rather than do it.

  Quickly looking at the specs for the games you mention and looking at the recommended specifications DO NOT the minimum specification (min spec will usually get a game running at a playable rate (just) and everything is turned down), the highest card required was a 8800GT NV, if whatever it is level with or above which should do what you need.

  Once again, from the charts, something like an ATI HD5670 or HD5770 should be enough I would say for around £60-70 pounds ish or £80 - £100 ish respectively. It depends on what you want to spend.

  GPU you buy will have memory on board. Get at least 512 M min and if all goes well 1 G and if we can choose the fastest best, i.e. DDR5 memory not DDR3.

  The other thing you should consider, is a free space to really adapt to the card (some cards are larger than others) and consumption of new maps, some cards will take much longer than others.

  Personally, with the processor you have, I doubt there will be much interest to aim too high wrt the GPU, with respect to the modern games really your CPU will eventually become the next bottleneck and you will have spent more money on the GPU only really usable by your system.

  If all goes well will live gamer high range "chip" soon and confirm or deny, but I think that something in the HD 5670 (or just above map AMD or NV) should meet your needs.

  I'm not sure to tweak windows to allocate more memory, but even if you did I doubt it would make much difference with the GPU you have currently.

• Search for Windows 7 - How to make it faster?

  Hi all

  I use windows XP WDS (Windows desktop Search) and can use the indexing with my server (NAS type) but I can't do that with Windows 7, the search is less than 1 second (indexing) compare 4 minute, I a way to speed up the search results? Thank you.

  I visited several forum but nothing really my problem suggestion. I'm not waiting to download the entire server in terabyte (not offline) to my PC. Thank you if anyone has a good solution.

  really grateful if someone can enlighten me on that. If this success, I get this program for my company.

  Best regards

  Stanley

  I tried but said that I am do not have sufficient privilege to perform the following task, Fords just move away and look at alternative. Thank you!

  Or you can simply index network as solution files.
  Add a UNC not indexed as a library = 1. Create a folder on your hard drive for the actions. that is c:\share2. Create another folder in the share above. that is c:\share\music2. Link the library in this folder. 3. delete the folder.4. Use the mklink in a command prompt to make a symbolic link. The link of the same name as the folder that you created above. IE - mklink /j c:\share\music \\server\music5. Fact. Now, you have not indexed the UNC path as a library.

• search options disappeared after updating firefox to address the slowness. How to make a comeback (there is no default search engine and no option)?

  the search box (with a magnifying glass to the left of it) is completely insensitive and there is no search option in the options of the menus/screens. Assistance from the address field in the search bar appears only intermittently to perform an Internet search for key words. a solution would be greatly appreciated.

  You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.

  If this isn't the case, then you need to reinstall Firefox.

  Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.

  You can use this button to go to the Firefox profile folder currently in use:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.

• How to make knot faster formula?

  Hi all

  I am trying to identify a known model of the Spectra peaks in a code from Labview real-time data collection.  My data collection occurs on intervals of 50 ms (20 Hz).  Unfortunately, my analysis routines take ~ 160 ms to complete, and for this purpose the causes my material missing data collects.

  Using the profile tool, it seems that one of the principal offenders is a subroutine that predicted what should be the entire spectrum, assuming that a few common summits of the desired spectral design are in the spectrum.  It creates a spectrum of Gaussians for prediction, which he then compares to the heights of the real.  If it isn't well correlate, then the proposal is false; If it is proportional, the code returns then what are the masses of the peaks.  I can then find the limits of the peaks (I need the area of the Summit, not only the location of the tip) and use them to science.

  In any event, it must cover the subroutine to make frequencies predicted several times.  In general, I plan the locations of 4 peaks in the spectrum, and the spectrum is usually long 3000 points.  My routine to a predicted spectrum has the following entries:

  

  When the size is the number of points, width is the width of 1/2 of all summits, the amplitude is the height of an individual peak and Center is the location of the peak in the spectrum of 3000 point.  Table Gaussian is the output.

  The code looks like this:

  

  (vi attached below)

  My question is: can I can do something to improve the speed of calculation (in other words, I do something stupid?)?  Or is it just about as effective a subroutine as is possible?

  Thank you very much for your understanding!

  RipRock

  
  

• my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  my internet is slow I use a box of mifi varisen can someone tell me what to do to make it faster

  Hello

  1. don't you make changes on the computer before the show?
  2. using Internet Explorer or another third party browser on the computer?
  3. have you installed Verizon software on your new machine?
  4. what operating system you are using on the computer?

  
  If you use Internet Explorer on the computer, then you can see the steps in the link and check.

  Why is my Internet connection so slow?
  

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Also check out the link for more information.
  How to increase the speed of navigation: 7 ways to work faster on slow connections
  http://www.Microsoft.com/atwork/remotely/connections.aspx

   

• How can I upgrade my Presario CQ57 to make it faster?

  Hello

  My laptop is a bit slow, so I'd like to update some of the components to make it faster.

  Could you recommend me a better processor? & a RAM if you consider it necessary for this purpose?

  Compaq Presario CQ57 Notebook

  Intel (r) Celeron (r) CPU B800 @ 1.50 GHz 1.50 GHz

  2.0 GB OF RAM

  _ 64-bit Windows7

  Computer system product: 5CB21874YP

  Hewlett-Packard: 068C 110003204910000620100

  Thank you

  RAM is much easier updating. I recommend at least 4 gigs, and it will take up to 8. She takes DDR3-1333 SO-DIMM memory. CQ57-339WM seems to be your model.

  This is the service manual you need to swap processors:

  Manual

  The CQ57s equipped with a Celeron processor will accept only the Celeron processors. There are a couple more quickly available for your computer Celeron, but exchanging a Celeron for a another Celeron just doesn't seem worth it to me.

  If you want the computer to run more quickly install 4 GB of RAM and upgrade to a disk hard solid state. The speed improvement is actually more you'd get from opting for a faster Celeron processor. After the back if you want more specific suggestions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• PE 4.0 - how to make PART of a slow-mo clip? is this possible?

  I see many tutorials on how to do something to slow down the movement, I fully understand how to do this. I'm a skateshop owner and have been filming recently taught me how to use Adobe first Elements 4. I know how to do a full clip slowed down, but I need to know how to make the World JUST a part of a slow motion clip, or is it still possible in this program? I've been racking my brain for days now, and I can't understand it. Help?

  All you need to do is use the scissors (Razor in PrPro) tool to "cut" your biggest Clip where you want to apply the Slo - Mo and then do the same thing, where you want to end. apply your effect, and you're done. Listen to the Audio at that time, to ensure that there is no problem with that.

  Good luck

  Hunt

• How can I make this faster (more efficient) loop?

  IV attached a screenshot of my code. In the books it is said not having 'picture of generation' and "concetenate strings" in the loop, but what can I use instead? Also are there any other changes I can make to this program, to make it faster?

  See you soon,.

  Sam

  Sam,

  for a structure (except "timed structures" as the timed loop) of the time, you place the wait function within the frame where the wait is scheduled. So in regard to a loop simply drag it iside the loop and connect a time-out for her.

  Looking in your VI, there is always something preventing the VI of work:

  -Remove useless (in comparison with the 10) logic including the invalid son

  -Connect a digital '10' to the "n" - of the loop in order to limit the number of iterations to 10.

  -Change the output terminal of the loop of the piles of data to be "Indexing" (right-click on the tunnel and select "Enable Indexing"). This will create a table 2D channels; Therefore, you must connect the stringarray on table 'spreadsheet of writing file' 2D connector instead of connector D 1.

  -Never, really never ever ever work with unstoppable loops in Windows! This already messed up complete systems of tests doing serious damage to the equipment. The only target I'm ok with infinite loops are FPGA and to some extend, real-time targets...

  The right approach would be a producer/consumer, but looking in your messages that you posted the last days, I would say that it is beyond your current knowledge of LV...

• Size video questions/slow performance after update by 2014 CC

  Hi all

  I'm not a business editor, so please bear with me here. I spent the last few days around looking for an answer and were not able to achieve much.

  I'm on a Macbook 2011 end Pro, 2.2 GHz Intel Core i7, 4 GB 1333 MHz DDR3, AMD Radeon HD 6750 M 512 MB, Mac OS X Lion 10.7.5 (11G63b).

  I have spent a month cut my first little experimental feature including the Deputy Editor set up for me (and which is currently absent).

  My computer is not rocket fast, but I was able to complete the first past little on first CC (7.2.2?) with few major problems.

  A week ago, I upgraded to first CC 2014 8.0.

  I immediately noticed that my images went from this:

  

  To do this:

  

  (Details of the images):

  

  

  Because you might be able to say, we shot very old school VHS to help sell the setting of the 1990s. It was a nightmare to find the best way to export everything. I still don't know if we did it entirely correctly - and I hope that this is not the cause of these problems. Also, I know that VHS is only SD - we chose to import the highest quality, which is 1920 x 1440 and ProRes 422, because more of the precision of image was present in low light.)

  --

  I found that I had to select all the clips in each scenario, right click and select 'Set to the size of the image' to have the complete video picture once more. Then I had to restore everything.

  As I tried to regain my edit, the performance has been much slower. Reading is a nightmare. I constantly get the beach ball of death. It takes several minutes to save the project. And he started to plant about once an hour above all.

  But I continued to work for the last eight days, hoping that I would be able to remedy this somehow.

  I have cleared the cache with no luck.

  I read that I could uncheck "Composite linear color" to make it faster, but it wasn't a problem during the last generation.

  My reading and resolution paused is 1/4.

  I read that I should update my operating system OS X Mavericks, but keeps crashing too! Haha.

  I understand that my system is not the best, but I want to just my project to perform as well as on the first CC before the update.

  I just talked to a technician in Adobe who basically told me that he was not a solution here to also back to first CC from 2014 CC - or buying a new Macbook.

  But there must be a way I can get the same performance I did the upgrade, right? I have a feeling that something happened to how CC 2014 using the existing images.

  (Also, I noticed that the clips where I increased the zoom, i.e. 100% and 110%, were back to their original size. And instead of saying 100%, he said now 300%. I guess it's because of the "image size"SETTING", but this was not the case on the first CC.)

  Does anyone have ideas, what can I do here?

  Here are my settings in sequence on CC 2014:

  

  And CC:

  

  For some reason, some parts of this window are dimmed and not 2014 cc. Not sure if this has anything to do with the question.

  Thanks a ton in advance everybody! I can't really afford to lose 8 days of work, any help would be greatly greatly appreciated!

  I'll be more than happy to provide additional information.

  I'm really looking to find, in the end, if my only two options are: a) go back to first CC and lose my recent work or b) buy a new laptop, which I can't afford.

  (As a question, is there a way I can transfer my recent work of 2014 CC to CC? I understand this is not backwards compatible, but there must be at least a partial solution).

  Best,

  Jon

  You shot SD... If you really need to edit in a sequence of SD.

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to make the darker text and how to get rid of the ads on my toolbar

  original title: GI 82 and my text is too light, how to make it darker also how can I get rid of the ads on my toolbar

  Just do my text coming or in your darkest records

  Hello

  1 are you referring to the ads in the Internet Explorer toolbar?

  2. are you referring to the policies of the Internet Explorer icons?

  Method 1: You can change the theme of the operating system Windows 7 high contrast themes that will make the text and the darkest record.

  Follow the steps below to change the high contrast theme.

  1. open Personalization by clicking the Start button, then Control Panel. In the search box, type personalization, and then click customization.

  2. under Basic and high contrast themes, click Windows 7 Basic or one of the high contrast themes.

  Method 2: In order to disable ads in Internet Explorer disable all modules and check if this is useful.

  No add-on, run Internet Explorer mode.

  a. Click Start, point to programs, point to Accessories and system tools

  b. click Internet Explorer (No Add-ons).

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  a. click Tools and then click Internet Options.

  b. click on the tab programs, then click on Manage Add-ons.

  c. click an add-on in the name list and then click on disable.

  d. Repeat step c until you identify the add-on that is causing the problem.

  If this solves the problem, this could be caused by an adware installed as add-on. See the link below for more information.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance