NEED A BIT OF HELP

Similar Questions

• Static IP configuration on a WRT610N, need a bit of help please

  173.15.62.62 bridge

  . 61. 57 subnet

  Define the Internet to use the static IP... then enter the path of the door, DNS, etc. I guess the IP address is 173.15.62.61 (OR any of my usable subnet to. 61-. 57)

  Now, the value OFF, DHCP and NAT off (correct?)

  So here's where I'm stumped, under the configuration of the network address of the router, who goes there? His game for internal 192.168.1.1 and mask 255.0... would this need is the address I have set up under "IP address"?

  Also, there is no way to run my static IP with DHCP correct subnet still active? Wanting to make some box is not foreseeable on the netowrk, ala 10.10.x.x

  Thanks for the help...

  Chief

  Yep, NAT or disable does make a difference... but its THERE.

• Trying to recreate this logo for a client... need a bit of help

  The company cannot find the files of original project, of course, and I'm not so amazing in Illustrator immediately. I don't get a great result in the record of the image. I know that the police are Rockwell STD and looks like he has a bow. I do not understand how to create the black shadow or extrusion behind the letters.

  Can anyone offer a vision a bit?

  

  Since it is a logo, you would need to keep it as simple as possible and expand the effect 3D anyway.

  So what you can do is: make sure shading flat is on the 3D effect (or no shading) and then object > expand appearance. Gives you simple curves (but there might be a lot of clipping masks that you release as well).

  Then, you can color the paths that you want and of course their race and refine.

• simple ' show / hide ' script using option buttons, need a bit of help

  Hello;

  I have a place in my form I need to swap out what type of form you need to fill in an area. If I don't do it, it makes the page look over crowded, and if I go off to a process 2 or 3 steps, it doesn't have enough information in each section to be worth. It is one or the other.

  At the present time, this code works well. Click on a radio button, and the form section appears and disappears. What I'm trying to do when the page loads, one of the radio buttons is selected and one of the sections of the form is visible. Then if you click the other radio button, it inverts the.

  can someone help me tweek this code if one of the buttons is selected all the time?

  Here is my script.

  < style type = "text/css" >
  {.showHide}
  position: absolute;
  background-color: #f1f1f1;
  Width: 350px;
  padding: 1px;
  color: black;
  border: 2px #999999 wiped out;
  display: none;
  }
  < / style >

  
  < script language = "JavaScript" >
  function setVisibility (id, visibility) {}
  document.getElementById (id).style.display = visibility;
  }

  < /script >

  < form >

  < input name = type type = radio onclick = "setVisibility ('sub3', 'inline'); setVisibility('sub4','none');" value "male" = checked > selection 1 "

  < input type = radio type value = 'female' onclick = name = "setVisibility ('sub3', 'none'); setVisibility ('sub4', 'inline');"; > selection 2

  < div id = "sub3" class = "showHide" > selection 1 content < / div >

  < div id = "sub4" class = "showHide" > selection 2 content < / div >

  < / make >

  That's the short of it with tons of other codes on anyone of dumping.

  Thank you

  You took the class attributes of option buttons that corresponding with the functions of jquery... very simple fix. I have re-uploaded the sample page with your code and the class number fixed. Seems to work well. If you have other questions give me a shout. New page updated.

• Need a bit of help with the string read/write DLL

  I have a DLL that communicates via RS232 with some instruments.

  From 2 numbers (parameter number and a number of processes) the DLL will communicate and extract the values.

  I managed to put in place the DLL to get words, characters, long and floats (single precision).

  Now, it is the documentation that accompanies it for strings:

  

  ReadString asks the DLL to get the data of the instrument, if succesfull I have others on call GetString to get the string memory.

  I have a few questions:

  -The values of her star (*) are pointers; As I understand it that it points to a place of memory where the value is stored, is - that correct?

  -How do I know if I pass the value to the DLL, or read? For example with GetString Im not sure if

  I should pass the length of the string to the DLL or if it is read

  -How to get the character returned in a string; IM assuming I need to find somewhere a byte array.

  Now I can also write strings:

  

  As a matter of f:

  -Should I add NULL at the end of the string, or labview does by default?

  My procedure is now: read the input chain, reduce it to the size of the specified string (this is constant according to the setting of the instrument), converted to a byte array and replace the last element of the array with 0 (Null).

  However, the DLL entry expected a character, that I should get in the DLL?

  _Faust wrote:

  I have a few questions:

  -The values of her star (*) are pointers; As I understand it that it points to a place of memory where the value is stored, is - that correct?

  They can be pointers or buffers. Which of the two is ambiguous in the syntax of C. However, in your case I suppose that piMsgId and pcLen be a pointer to a unique value and pszDest a string buffer.

  -How do I know if I pass the value to the DLL, or read? For example with GetString Im not sure if

  I should pass the length of the string to the DLL or if it is read

  Description is not really clear however most of the C API require today the length of the allocated buffer at the entrance to make sure that they don't overrun the buffer length. They may or may not change this value before returning to indicate the amount of data they actually informed. The pcLen parameter passed by reference probably indicates that this function does this way.

  -How to get the character returned in a string; IM assuming I need to find somewhere a byte array.

  It is not necessary. You can simply set the parameter to a string and must be passed as a C string pointer. In LabVIEW 8.5 or more you can also configure to resize this string for the number of characters as indicates it a different setting of the library to compose the node (CLN), in this case your pcLen. 8.5 you can use a table to explicitedly initialization function create a table Bbyte of the length needed, convert the byte array to string and pass to the CLN parameter. LabVIEW will return automatically only the part of the string up to the NULL character if a CLN is configured as C string pointer

  Now I can also write strings:

  As a matter of f:

  -Should I add NULL at the end of the string, or labview does by default?

  No! If you configure the parameter is a string, passed as a string pointer C, LabVIEW will do it automatically for you.

  My procedure is now: read the input chain, reduce it to the size of the specified string (this is constant according to the setting of the instrument), converted to a byte array and replace the last element of the array with 0 (Null).

  However, the DLL entry expected a character, that I should get in the DLL?

• Need a bit of help on vSphere bypass network

  Hi all

  I'm new, please bear with me if this question is stupid.

  I want to know if there is a way to share "invited a network in a BONE connection" with all of the server VM.

  I am running a vmware 5.5 hyper-visiere (type 1) on a laboratory server, which is equipped with a single Ethernet NIC card. And I have another D-LINK external wireless network card at hand which requires drivers (provided on a cd) windows must be installed to use the device.

  I created an OS (win 7 pro 64-bit) guest in the environment and installed D-LINK drivers inside the guest operating system can use the NIC without external wire to the network, then I disconnected the Ethernet cable connected to the server.

  Now the situation is I have more connection ├a use vSphere to manage the VM server, but I could still access the guest OS mstsc (remote desktop windows) since the guest OS is using the NETWORK card wireless attached on the server.

  Yes, it will be a problem for me to keep the Ethernet cable to the server 24/7, so I hope to find a way to use the NETWORK card wireless (currently used in a guest operating system) to manage the connection vSphere and support I hope that all network traffic for the server and all its guest OS.

  PS: I assume that the wireless NETWORK card will not work unless the windows driver is installed, and I think that the VMware hypervisor cannot start windows applications in? I also tried to add the NETWORK card wireless in vSphere as another device, but it did not work, I remember well.

  I hope that I have described sufficiently explanatory problem, I am happy to provide more details on the system.

  
  

  BTW, sorry for the bad English.

  Thanks in advance.

  Blut

  Hello

  I'm afraid that it is not possible to do what you tried to.

  As a solution to a lab environment, you can install Windows as your primary operating system on the system and install the vSphere Hypervisor inside a VMware Player or workstation as a Virtual Machine.

  In this way, your ESXi-VM could use wireless LAN from the windows of the host.

  This is called "nested virtualization" and is quite common in the lab environment at home where you have a large number of servers or server, which is not supported by VMware.

• DataGrid, refresh and filter, need a bit of help

  Hi all.

  I have a datagrid.  It's full on application creationComplete using the following code

  protected function application1_creationCompleteHandler (): void
  {
  db_services.endpoint = " " http://bleh/AMFPHP/gateway.php ";               
  db_services.source = 'jobs '.
  db_services.destination = 'amfphp ';
  db_services. GetOperation ("getYourJobs"). Send();
  }

  My datagrid is then pulling in data from the table as follows

  < mx:DataGrid width = "362" height = "340" itemCreationPolicy = "immediate" includeIn = "clientuser" x = "1" y = "30" dataProvider = "{YourJobsArr}" id = "CU_YourJobs" >
  < mx:columns >
  < mx:DataGridColumn headerText = "" ID: "width ="42"dataField ="id"/ >"
  < mx:DataGridColumn headerText = "" ad Ref: "width ="70"dataField ="jobref"/ >"
  < mx:DataGridColumn headerText = "" company: "dataField ="companyname"/ >"
  < mx:DataGridColumn headerText = "" Position: "dataField ="position"/ >"
  < / mx:columns >
  < / mx:DataGrid >

  There is a log on screen until the user gets to see this datagrid, however, and based on that they connect as a filter is executed on the data, the filters is

  YourJobsArr.filterFunction = GetYourCurrentJobs_filterFunc;
  YourJobsArr.refresh ();

  This code is located in the statement of success login

  protected function GetYourCurrentJobs_filterFunc(item:Object):Boolean
  {
  If (item.assignedrecruiter is LoadedID)
  {
  Returns true
  }
  on the other
  Returns false;

  
  }

  This is the filter

  Now, this works well, as I connect to different accounts, they can see that the data they are supposed to.

  However, I have another State where the user can add data to the database mysql, which comes from the data.

  Now that they submit this button, I need to remind the AMFPHP script to call the database and retrieve all the information once again, that the data added are looked at.

  I did it using this on my "submit" button

  < s:Button x = "88" y = "200" label = "create a task" click = "createNewJob (), application1_creationCompleteHandler ();" "/ >

  Now the only problem here is that all the data is reduced, it is not filtered.

  Can anyone suggest how I can then re-filter-la before his watch?

  -All right, so what is happening out there, is that you create a new ArrayCollection collection object which (being again) has no filter function. All you have to do in the result handler is the value of the function of filter and then apply the filter with a refreshment.

• Need a bit of help [can't drag photos into folders of Collections]

  When I import my photos into Lr for my drive hard I can't click and drag and drop them in one of my folders of Collections.

  You must point your mouse to the center of the photo, and then drag it in the desired collection.

  Related issue:

  I can't click and drag and drop them in one of my folders of Collections.

  The collections are not folders. Records are not collections. You must understand the difference in order to use Lightroom efficiently.

• need a bit of help please

  Hi, I have a video of the minute and a half that I'm almost done, but I can't click and drag the keyframes between video clips to bring down a little audio.  I've tried everything I can think of and I posted questions here, but I got no response.  No matter who would be ready to open this video and see if they can do it?

  You cannot move the keyframes is because you have the locked track (diagonal lines)

  Click on the padlock on the left of the timeline to unlock.

• Navigation bar by tabs XHTML - need a bit of help

  Hello
  
  I have trouble to get a system of CSS tabbed browsing in Firefox 2 (on PC). Makes good in IE6 +. The construction can be found here: http://www.cpfm.com.au/entry.htm .
  
  Navigation tab itself stays highlighted while its associated page is currently viewing, however the in Firefox 2 I can't force the color of text in the white nav button (#FFF).
  
  All styles are applied to the primary navigation system are grouped in the style sheet. Styles can be found here http://www.cpfm.com.au/css/styles.css
  
  A second set of eyes looking at this would appreciate. A fix would be much appreciated.
  
  Thanks in advance,
  JD
  

  The problem is now resolved.

• bought and downloaded 32-bit when my computer needs 64 bit update,

  I just accidentally bought the update of items 13 to Photoshop in the form of 32-bit. My computer

  needs 64-bit. What should do?

  Download the 64-bit version of here:

  Photoshop elements help | Download Photoshop Elements | 10, 11, 12, 13

• Hi.Downloaded Elements13. Try to run it, the downloaded package is 32-bit, but it tells me that I need 64-bit. When I downloaded the package, it does not offer an option... I am also frustrated that had produced 8 weeks now and can't use it

  Try to download 13 items. But the package loads 32bitand when I try to install it says I need 64-bit... When you download the package I cannot find the options for flow rates.

  Download and install the 64-bit PES 13.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Free download of Adobe Pro XI retains 32-bit download and I need 64-bit. How can I specify?

  Free download of Adobe Pro XI retains 32-bit download and I need 64-bit. This is why I can not launch the application. How can I specify a download 64-bit?

  There is not 64 bit acrobat: FAQ | Adobe Acrobat Pro XI
  

  
  

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• My Premiere Pro hangs at startup... It's very heavy, I need for College. Help!

  On my Adobe Premiere Pro crashes and States of startup window to close. I need for the work of the College. Help! BTW, I really wish that Adobe has a support team who does not direct you to the discussion forums. I need every bit of time I have to work on my homework, because of my work outside the school schedule. Sitting in front of a computer, you ask you through each forum, time consuming and sometimes does not. GRRRRR!

  What is your exact make and model graphics card (ATI or nVidia or?)

  What is your exact graphic adapter driver version?

  Did you go to the vendor's web site to search for a newer driver?

  For Windows, do NOT rely on Windows Update to have information about the current drivers

  -You must go directly to the vendor's web site and check the updates by yourself

  Autodetect Driver ATI http://support.amd.com/en-us/download/auto-detect-tool

  nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  Double video problems

  Go to the Windows Control Panel and select hardware and sound, and then select Device Manager... In Device Manager, you click on the sign to the left of graphics cards... + and see if the 2 are listed

  IF SO, read below

  -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html

  -http://forums.adobe.com/thread/1001579

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0

  -Why link http://forums.adobe.com/message/4685328

  -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

  -HP Fingerprint/password in conflict http://forums.adobe.com/thread/911575

• I need to disable the 'Help' option in the main menu.

  I am running Public Fox 1.09 as an addition in our school district, because it allows me to keep the students from our proxy. They discovered that all that they have to go to 'Help' and 'restart with disabled modules. They can then select "Not of Proxy" and get anywhere that they want. I need to disable the 'Help' option in the main menu.

  Hello NeonLeon, if it would be possible in principle to hide some menu entries, the next thing that your students will discover is that you can also get in safe mode by pressing the SHIFT key while launching firefox, so it's no solution...

  You can use a mozilla.cfg file in the firefox program folder (where the students hopefully will have no write access) to lock some preferences as the configuration of your proxy, for more information, see: http://kb.mozillazine.org/Locking_preferences