Need a script for the trails and clipping paths
I have over a hundred images (.tif or.) TIF) which have cut a path, but the names are all different. In addition, some have been activated for clipping paths. I need all paths tracks/clipping named path 1. I found an old javascript to do this using ExtendScript Toolkit, but it does not work. Any advice would be greatly appreciated.
var selFolder = Folder.selectDialog ("location of pictures to treat... ») ;
var files = selFolder.getFiles (/.) TIF | TIF / I) ;// must change to different formats
argument newPathName var = prompt ("Put your cutting path name that you want," "path 1,"Clipping name"")
for (var f = 0; f < files.length; f ++)
{
var doc = app.open (files [f]);
var numberOfPaths = doc.pathItems.length;
for (variety p = 0; p < numberOfPaths; p ++)
{
If (doc.pathItems [p] .kind == PathKind.CLIPPINGPATH & & argument newPathName! = doc.pathItems [p] .name) doc.pathItems [p] .name = argument newPathName;
}
doc. Close (SaveOptions.SAVECHANGES);
}
It is not a translation problem, after all, some of the files had problems sharing & permissions so I changed them all to & read/write. So I ran two separate scripts because I do not know how to combine them into one. It's what worked:
This is script is for the NORMALPATH railways:
var selFolder = Folder.selectDialog ("location of pictures to treat... ») ;
var files = selFolder.getFiles (/ \.tif$/i) ;// must change to different formats
argument newPathName var = prompt ("Put your cutting path name you want", "path 1", "Path name")
for (var f = 0; f)< files.length;="" f++="">
{
var doc = app.open (files [f]);
var numberOfPaths = doc.pathItems.length;
for (variety p = 0; p)< numberofpaths;="" p++="">
{
If (doc.pathItems [p] .kind == PathKind.NORMALPATH & argument newPathName! = doc.pathItems [p] .name) doc.pathItems [p] .name = argument newPathName;
}
doc. Close (SaveOptions.SAVECHANGES);
}
This is for the CLIPPINGPATH railways:
var selFolder = Folder.selectDialog ("location of pictures to treat... ») ;
var files = selFolder.getFiles (/ \.tif$/i) ;// must change to different formats
argument newPathName var = prompt ("Put your cutting path name that you want," "path 1,"Clipping name"")
for (var f = 0; f)< files.length;="" f++="">
{
var doc = app.open (files [f]);
var numberOfPaths = doc.pathItems.length;
for (variety p = 0; p)< numberofpaths;="" p++="">
{
If (doc.pathItems [p] .kind == PathKind.CLIPPINGPATH & argument newPathName! = doc.pathItems [p] .name) doc.pathItems [p] .name = argument newPathName;
}
doc. Close (SaveOptions.SAVECHANGES);
}
I didn't have a single file with two paths inside and a dialogue has come, and I changed it to track 2, no sweat.
Thanks for all your help!
Tags: Photoshop
Similar Questions
-
Satellite 1000-Z2: I need a driver for the display and the LAN
Hello
I reformatted my laptop S1000-Z2, and I have a real problem trying to find all the information about this model!
Basically, I need a driver for the display and the LAN?
Best regards
Austin.
What operating system do you use?
If you use XP, you will not find the network on the site recommended driver driver!
I can't give you advice where to find such driver because I don t know what the LAN card is installed in your oldie.But why you n t check yourself? Try to know what the LAN card you use and googel a bit for compatible applications ;)
-
Need a script for the network card and Vswitch info
Hello
Can we have a script to list out the output of information network/vsiwtch as below for all clusters in VC to CSV. Name of host mcadress name of the physical card Vswitch name team Vswitch (NLB/FTL)
Hello
Sorry for the late reply, was absent for a few days
It's the new version:
$output = foreach ($esxi Get-cluster |) Get-VMHost | Name sort)
{
foreach ($vSS in (Get-VirtualSwitch - VMHost $esxi))
{
$pnic = $vSS.ExtensionData.Pnic - replace ".". *- » | Kind of Teddy bear
$mac_address = foreach ($p in $pnic) {$esxi.ExtensionData.Config.Network.Pnic |} Where-Object {$_.} Device-match $p} | %{$_. Mac}}
$esxi | Select-Object @{N = 'ESXi'; E={$_. Name}}, @{N = "Physical map"; {E = {[String]: Join (",", ($PNIC))}}, @{N = "MAC address"; {E = {[String]: Join (",", ($Mac_Address))}}, @{N = 'vSwitch name'; {E = {$vSS.Name}}, @{N = "vSwitch political grouping"; {E = {$vSS.ExtensionData.spec.Policy.NicTeaming.Policy}}
}
}
$output | Export-CSV "C:\output.csv".
Example of output:
ESXi: test
Physical map: vmnic0, vmnic1
MAC address: 11:22:33:44:55:66, 11:22:33:44:55:67
vSwitch name: vSwitch0
vSwitch political group: loadbalance_srcid
ESXi: test1
Physical map: vmnic2, vmnic3
MAC address: 11:22:33:44:55:68, 11:22:33:44:55:69
vSwitch name: vSwitch1
vSwitch political group: loadbalance_srcid
Hope this helps,
Steven.
-
Need a script for marginal elements consists of two tags
Hello world
I need a script for the marginal elements with two paragraph tags. Object styles, library items are all available for this work. My requirement is to cut two paragraph tags and put it in the library and also using styles of both object elements. Is this possible? Can help you to do this. For more information, I have attached this file also.
Waiting for your answer...
Hi try this code...
main();
main() {} function
If {(app.documents.length!=0)}
{if(App.Libraries.Length!=0)}
myStyleDialog();
}
else {}
Alert ("Please open library.");
}
}
else {}
Alert ("Please open a document and try again.');
Exit (0);
}
}function myStyleDialog() {}
var myLabelWidth = 120;
var myParaStyleNames = myGetParagraphStyleNames();
var myObjStyleNames = myGetObjectStyleNames();
myDialog = app.dialogs.add var ({name: "Choose the Styles instead of anchoring"});
{with (MyDialog.dialogColumns.Add ())}
{with (borderPanels.Add ())}
{with (dialogColumns.Add ())}
{with (dialogRows.Add ())}
{with (dialogColumns.Add ())}
staticTexts.add ({staticLabel: "choose paragraph Style1:", minWidth:myLabelWidth});})
}
{with (dialogColumns.Add ())}
myParaStyleDropdown1 = dropdowns.add ({stringList:myParaStyleNames, selectedIndex:0});})
}
}
//---------
{with (dialogRows.Add ())}
{with (dialogColumns.Add ())}
staticTexts.add ({staticLabel: "choose paragraph Style2:", minWidth:myLabelWidth});})
}
{with (dialogColumns.Add ())}
myParaStyleDropdown2 = dropdowns.add ({stringList:myParaStyleNames, selectedIndex:0});})
}
}
//----------
~ {with (dialogRows.add ())}
~ {with (dialogColumns.add ())}
~ staticTexts.add ({staticLabel: "Object Styles:", minWidth:myLabelWidth});})
//~ }
~ {with (dialogColumns.add ())}
~ myObjectStyleDropdown = dropdowns.add ({stringList:myObjStyleNames, selectedIndex:0});})
//~ }
//~ }
}
}
myReturn = myDialog.show ();
if(myReturn == true) {}
myParagraphStyle1 = myParaStyleNames [myParaStyleDropdown1.selectedIndex];
myParagraphStyle2 = myParaStyleNames [myParaStyleDropdown2.selectedIndex];
myObjectStyle = myObjStyleNames [myObjectStyleDropdown.selectedIndex];
myDialog.destroy ();
}
else {}
myDialog.destroy ();
}
}
}
function myGetParagraphStyleNames() {}
var myStyleNames = app.documents.item (0).paragraphStyles.everyItem () .name;
Return myStyleNames;
}
~ function myGetObjectStyleNames() {}
~ var myObjStyleNames = app.documents.item (0).objectStyles.everyItem () .name;
~ return myObjStyleNames;
//~ }//----------------------------------------------
myDoc var = app.activeDocument;
var myDoc.stories = monarticle;
var myParas, myCount = 0;
myLib var = app.libraries [0];
var AnchorItemName = prompt ("Enter the name of library point exactly", "", "anchor point");for (i = 0; i
{
myParas = .paragraphs [i] monarticle;
If (myParas.length > 3)
{
for (j = 0; j
{
firstPara var = myParas [j];
var nextPara = myParas [j + 1];
var firstParaStyle = firstPara.appliedParagraphStyle.name;
var nextParaStyle = nextPara.appliedParagraphStyle.name;
If ((nextParaStyle == myParagraphStyle2) &&(firstParaStyle == myParagraphStyle1))
{
myText = myLib.assets.item (AnchorItemName) .placeAsset (firstPara.insertionPoints [0]) [0];
firstPara.move (LocationOptions.after, myText.insertionPoints [0]);
nextPara.move (LocationOptions.after, myText.insertionPoints [-1]);
myText.fit (FitOptions.frameToContent);
myCount ++;
} //End If
} //End of iteration Para
} //End of If paralength > 2
} //End of iteration history
Alert ("Found and dealt with Occurrences" + myCount);--------------
Green4ever
-
Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.
If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).
In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service
Thank you
Abhishek
-
I need help with installation of lightroom 5 on a HARD drive, for the start of the SSD is to small for the catalog and images. Please can anyone help with information. There is no possibility of EIB "Bearbeiten - Katalogeinstellungen" ist just the way c:/users/...etc fixed. Is the anywere that can help you.
Thanks FRANK
Why I can not install Lightroom to a custom through the creative cloud location?
Lightroom must be installed on your local disk and cannot be installed to a creative custom as other Cloud applications location. Lightroom always installs to the default location and does not take into account any preference you select for a custom location. This behavior is specified.
-
create bookmarks for the front and the back of the cover
Go easy on me please I tried for two hours to do this simple thing! (At least, I assume it's simple).
I try to add bookmarks to the front and the back of the cover of documents. The coverage is obviously the first page (always!) but the rear hull could be any page number, according to the document. Curiously, I did a before work for the calculation of the last page and this isn't my problem.
In any case, of hackering autour with stuff in the javascript reference and some tutorial, I so far have this:
var plan = this.bookmarkRoot;
myRoot.createChild ({cName: "Front Cover", nIndex: 0});
myRoot.createChild ({cName: "Back Cover", nIndex: 99});
Thus, this creates two bookmarks where I need them, 'Coverage' at the beginning and the 'cover' at the end of the bookmarks already in the doc. Obviously this works only because the number of 'already' bookmarks will never exceed 99, but it seems to work ok!
In any case, my problem is that I can't work a way to set the destination - for the life of me I'm sorry I read the docs, but my experience is limited I think it's almost impenetrable. I think that this should be simple, because the cover should always point to page 0 (in a zero index) and I'm not only bothered about 'back' because I can reuse the code because I have to work on the number of the last page. So if someone could help me by telling me how to set the 'cover' down on the first page (0) when you click on - I can go to bed at a decent hour!
When you create a bookmark using a script you can define its action to a script, you can use something like that to the front page:
myRoot.createChild ({cName: "Front Cover", nIndex: 0, cExpr: "this.pageNum = 0 ;"});})
Moreover, instead of using '99', use this code to always create the bookmark back cover as the last of the list:
myRoot.createChild ({cName: "Back Cover", nIndex: myRoot.children.length});
-
Hello
Can you please help me for a powercli script that retrieves the VLANID of all distributed virtual port groups? I need only virtual port group name and vlan id in the output format.
I'm afraid of Robert solution will not work for the vlanid and pvlans ranges.
Try this
Get-VirtualPortGroup -Distributed | Select Name, @{N="VlanId";E={ $t=$_.Extensiondata.Config.DefaultPortConfig.Vlan if($t.VlanId.Count){ $t.VlanId | %{ $_.Start.ToString() + "-" + $_.End.ToString() } } elseif($t.Pvlanid){ $t.PvlanId } else{ $t.VlanId } }}
I limited the script for distributed Exchange, because I think that's what you were asking.
-
I need to move a large number of virtual machines with MS Server 2008 to another storage.
Could someone provide me with a small script for the list: all VM with GuestOS Type (MS Server 2008 filtered), name of store data and the overall computer virtual size!Thanks in advance
Hello, farkasharry-
How about something like:
Get-View -ViewType VirtualMachine -Property Name,Config.GuestFullName,Storage.PerDatastoreUsage,Summary.Storage -Filter @{"Config.GuestFullName" = "Windows.*2008.*"} | %{ ## get the name(s) of the datastores on which this VM resides $strDatastoreNames = ($_.Storage.PerDatastoreUsage | %{Get-View -Id $_.Datastore -Property Name} | %{$_.Name}) -join "," New-Object -TypeName PSObject -Property @{ Name = $_.Name GuestOS = $_.Config.GuestFullName "Datastore(s)" = $strDatastoreNames ## the amount of storage that the VM is using UsedGB = [Math]::Round($_.Summary.Storage.Committed / 1GB, 1) ## the total amount of storage that the VM _could_ use ProvisionedGB = [Math]::Round(($_.Summary.Storage.Committed + $_.Summary.Storage.Unommitted) / 1GB, 1) } ## end new-object} | Select Name, GuestOS, "Datastore(s)", UsedGB, ProvisionedGB
It filters on the virtual machines with an OS name ("GuestFullName"), which corresponds to 'Windows.*2008. ' * ' and returns their name, the GuestFullName, the data store (s) on which they reside (maybe more), and the opportunity - and put into service in GB disk space.
Return items are objects, so that you can select export to formats the info as you please, using the, say, Format-Table, Select-Object, Export-Csv, etc.
And, because it uses the cmdlet Get-View, it should work pretty quickly.
How does do for you?
-
How can I get the script all the tables and the reference system?
Hello
I'm trying to get the scripts of all the tables in my exquema MADE. Please can someone help me?Try this - the first script creates a 'tab_ddls' table to hold the table DDLS and second script generates the DDL and stores in this "table"tab_ddls ":
{code}
create the table tab_ddls (table_name, varchar2 (50))
table_ddl clob)
/declare
cursor tab_cur is
Select table_name
from all_tables
where owner = "MADE";
CLOB table_ddl;
Start
for rec in tab_cur
loop
Select dbms_metadata.get_ddl ('TABLE', rec.table_name, 'MADE')
in table_ddl
Double;
insert into tab_ddls (rec.table_name, table_ddl) values;
end loop;
dbms_output.put_line ('done');
commit;
end;
/Select * from tab_ddls
/{code}
Please modify the script to fit your needs.
HTH
Published by: user130038 on August 2, 2011 11:08
-
How can I add a separate apple for the iphone and ipad wife id
How can I add a separate apple for the iphone and ipad wife id
Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.
-
App for the time and payroll sheet calculations
My daughter in hospitality makes work so much split and travel on a Saturday and Sunday. I am looking for an application that we can punch in his hours for the week and be able to do the calculation of salary based on the appropriate hourly rate so that we can keep control of when it is paid as it's done correctly. Essentially, I'm lookin for an app connects timesheet information to the payroll data. Such an application exists and if so can anyone recommend one? Happy to pay for an if need be.
Hello alissah6,
Numbers from Apple is what I would recommend as far as doing calculations with a simple formula. You can learn more about this here.
The application costs $14.99, however it is packed and has more than 30 models - not to mention, you can also create your own if necessary.
I would check it out certainly if I'm looking for a few terms related to pay calculation in the App Store.
Thank you
James.
-
Satellite M30X-165 - need a driver for the PCI Flash memory
Hey,.
I need a driver for the PCI Flash memory, I have already searched the web and posted in other Forums, but I can't find anything. I heard he is hidden somewhere in another file... ? !
I have a toshiba sm30X-165I would be very happy if someone can help me!
Kind regards
Freddy
Drivers for Satellite M30X are placed in the archive on the European driver Toshiba page.
Product type choose Archive.
Then the Satellite-> Satellite M-> Satellite M30XThere, you must download and install the Cardbus and Chip Set Utility driver
-
restore service dependency for the network and sharing Center
How to restore the dependency service or group who couldn't start for network and sharing Center?
Hi patto1708,
If it was something that was already previously and failed after certain activities on the computer for which you are not aware of, then the best possible thing to do is run a system restore. This will ensure that your computer is back to operational status.
For more information about the system restore, you can see the link: http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions
Or you may need to check for the dependency of the network and sharing center services and start them manually when they are stopped manually.
See the link: http://windows.microsoft.com/en-US/windows-vista/Manage-services-in-Windows-Vista-from-Windows-Vista-Inside-Out to learn more about how to manage services in Windows Vista
Kind regards
SAP U G - Microsoft Support
-
Update error... I tried to update for the month and each time it fails
I tried to perform updates for the month and each time it fails. I get the same error message... Code 646 WIndows has encountered an unknown error. I did troubleshooting and you are unable to find assistance. I don't know much about the workings of the computer, but I know that I should be able to perform these updates. I think I need it too. I have 9 at this stage that it cannot load. Help, please!
I tried to perform updates for the month and each time it fails. I get the same error message... Code 646 WIndows has encountered an unknown error. I did troubleshooting and you are unable to find assistance. I don't know much about the workings of the computer, but I know that I should be able to perform these updates. I think I need it too. I have 9 at this stage that it cannot load. Help, please!
This link leads to a response from Bobby Mi, moderator.
Date: July 6, 2010
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232bBobby Mi response will lead to this tutorial from Microsoft Support:
http://support.Microsoft.com/kb/2258121Hope this can help solve your problem.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
Maybe you are looking for
-
In win 7, missing menu firefox, toolbars; Unable to access the reset
Using Win 7 64 bit. All of a sudden everything disappeared from firefox except the URL line. When I ran a checkdisk, there was corruption in a bunch of files. May have caused the problem. Went to try the mozilla support reset suggestion. Can't do it
-
HP Pavilion DV6-2066dX with Windows 7 Professional. Power icon shows 95% - plugged - do not load. I ran the HP Diagnostics and received the following message: Security ID: PTR2X9-000764-XD) 3GK-C0EC03 Product ID: VW881UA #ABA Main battery Starting t
-
How to add "bookmark all tabs" to the menu of bookmarks in FF 4.0?
I've used this feature as every other minute or so... really... and I find it really less use right-click differentt for all common things. Any way to get "To bookmark all tabs" back to my bookmarks menu? I'm not in the topic: config and I don't like
-
Help the Lenovo thinkpad X 220 Tablet + Windows 8.1
Hi I have a few problems on my X 220 tablet. I would like to install windows 8.1 on my 830 Samsung ssd. But I have the error code. You can see it here: http://i.imgur.com/VhNgb25l.jpg I actually 1.39 bios and there ar eno other bios on lenovo france
-
HelloOn startup, I get an error in the event log - event Id 3003 with Windows defender real time protectionID of control point: 57 Error code: 0x80070005 Error description: access is denied.I had changed a parameter in a function which I changed now