Need a simple readynas

Similar Questions

• I need the simple installation mode of firefox 5.0 on my eeepc 900 (default Xandros Linux) - I used to install 3.0, but is now obsolete

  the ed-meister has provided an excellent simple mode for the installation of version 3.0 of firefox and I did it correctly, but then when I looked at the edits, he said that I need to upgrade to firefox 5.0 and I need the simple mode for linux and I don't know what to type in the terminal/console

  Thanks for your help if necessary

  Check with the EeeUser forum to see what they have to say.
  
  http://Forum.EeeUser.com/

  I don't see Installing a browser 2011 in a 2007 operating system. I replaced Xandros with Easy Peasy 1.6 some time ago, 3.0 and 3.5 were too darn slow on Xandros even with the GTK update. A 900MHx processor will never be a speed demon, but you I have to give him a chance with a better than Xandros OS.
  Personally, I stay with 3.6.x until the end of the support. I don't see the need to upgrade to the latest version of Firefox now, especially on Linux.
  
  http://www.geteasypeasy.com/

• I need a simple solution to the cursor jumping around.

  I need ' a simple fixto the cursor jumping around.   I tried a system restore, but it does not work.   I'm not a programmer, so it must be simple, please help.    I'm about to throw this Windows OS Dell computer out the window.   Laughing out loud

  Hello

  1 does happen on all applications?
  2. you are using a desktop computer or a laptop?

  Method 1.
  If you use a laptop try disable the touchpad and check.

  Method 2.
  Step A.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  See the article below for the procedure safe mode in Windows XP

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step B.
  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I'm trying to download a file from the active section of the creative cloud, but it is not letting me. It is saying I need a simple or full membership, which I do. I have the plan composition of the photographer. I made sure I'm connected, but he's still

  I'm trying to download a file from the active section of the creative cloud, but it is not letting me. It is saying I need a simple or full membership, which I do. I have the plan composition of the photographer. I made sure I'm connected, but it is still trying to put me on a plan, which I have. Help please!

  Hashim, see the FAQ section on: CC help | Creative market Cloud

• I need a simple way to get rid of NoScript or I'm heading to Chrome soon!

  I need simple instructions on how to get rid of NoScript. It may be useful to someone, but not me. If I can't get rid of this frustrating POS today after ten years with Firefox I'm with Google Chrome by night.

  Could track down you where you installed Firefox from? If someone distributes a beam unauthorized Firefox with included modules, this could be a violation of the policy of Mozilla.

• Need a simple Web application

  Is there a simple application that is not too expensive, I can get put together a very simple Web page?   I used to have a website years ago but I'm rusty and need to start very simple to get back in it.   Any suggestions for something that will be easy to use with my Mac?

  KompoZer: http://kompozer.net/ (free)

  

  Also allows direct access to the HTML code. Simple and intuitive on a level basic, but able to use very sophisticated, if you want to enter. (Visible table borders in the image do not appear in the page.) It can directly publish to the server if you do not have to use an FTP program. He can write CSS, you can add it to the HTML code and it will recognize the external STYLE sheet.

• PID control using USB-6009, need of simple video or example vi

  I have a new usb-6009 and have tried all the videos on the NC

  Web site for practice. However with the version 8.6.1 I can't use

  the pid simple vi which is used on the video. (its too old 5 x v)

  I just need a PID simple vi to 8.6.1.so that day, I saw many complexes of vi

  for the demo of pid... I'm creating control tools... too to choose...

  any help looking for a simple vi or video? - as the demo shown

  the NI USB-6009 Web site...

  Concerning

  JJ

  Well, I did a simple proportional control for box usb-6009

  with a time inside the while loop... don't know if it's the

  Gourmet addresses... my sub PID vi is very simple...

  But it shows how to use labview and usb-6009 for case

  a loop very simple return PID...

  Concerning

  J

• I need to remove microsoft winterpack 2004 but can't and I need in simple terms please help

  It is always with the 1713 error code to remove it and I is not that good on Paolo so I need thank you very simple steps

  Hi ChristineHoward,

  1 Windows operating system you are using?

  You can read the following article and see if it helps.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  Hope this information is useful.

• Need help simple script

  Hi guys,.

  Need some help im working on a series of steamers one very simple but as im only learn Powershell atm I hit an obstacle. I would like to get a list of the strategy of starting for all my guests so far I

  Get-VMHost | Get-VMHostStartPolicy | FT - autosize

  That works very well but does not give me the friendly name of the host, I guess I can get probably that but don't know how.

  Thanks in advance

  www.virtualisedreality.com | www.Twitter.com/virtualisedreal

  Here's a way to do it, I'm sure there is an easier way, that I just can't think of it right now!

  $MyObj = @()
  Foreach ($vmhost in Get-VMHost){
       $StartupPolicy = Get-VMHostStartPolicy -Vmhost $vmhost
       $Details = "" | Select VMHost, Enabled, StartDelay, StopAction, StopDelay, WaitForHeartbeat
       $Details.VMHost = $vmhost.Name
       $Details.Enabled = $StartupPolicy.Enabled
       $Details.StartDelay = $StartupPolicy.StartDelay
       $Details.StopAction = $StartupPolicy.StopAction
       $Details.StopDelay = $StartupPolicy.StopDelay
       $Details.WaitForHeartbeat = $StartupPolicy.WaitForHeartbeat
       $MyObj += $Details
  }
  $MyObj
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Need a simple script, I think.

  I just created a document merged 500 + page [first time use datamerge - coolio] but now need to apply a color swatch in image in grayscale (a QR code) on each page. I could convert all the K in CMYK files, triple the file size of graphics 2700 and undergo an inelegant solution OR ask someone to help me with a simple applescript to do the same thing... unless there is another way to do that I did not understand.

  I have NO experience of script and don't have time to learn it for this project. Anyone feeling the generosity of the season and willing to point me in the right lane?

  Thanks in advance.

  Jessica

  [CS5 on Mac 10.5.8]

  Here you are.

  In the first line, you should put your name instead of 'Gray' to swatch. Copy, and then save it as plain text (if you are using TextEdit on Mac, select present first in the Format menu) in your folder users Script as "MakeAllGraphicsGrey.jsx". Double click to run and sit.

  var swatch = app.activeDocument.swatches.item("Gray");
  for (var i=0; i
  Here's a before (left) and after (right) photo to show this works axually.
  
  (Jongware posing with his new tattoo).
  		   

• Need a Simple answer to the question Simple Contribute/Firefox

  Hello all;
  
  I tried using Adobe CS3, technical support, telephone support, this forum, other forums, Mozilla, and nowhere can I get a straight answer, so I'll try one last time before giving up on Adobe products.
  
  I have CS3 Web Premium. The entire suite is on the iMac and MacBook Pro. I need to update a Dreamweaver site on a trip with a MacBook Air.
  
  Please help me understand this.
  
  Contribute apparently has the ability to put a plug-in in Firefox, then you can update the remote sites. It is not clear from all sources above if the module of the suite of Contribute must be on my MB Air, or if I can just get Firefox for the MB Air card and put in place the web site for the distance of publishing using Contribute on the iMac.
  
  It would be the simplest: use Ct on the iMac to some portions of the site for editing by using Firefox from the MB air. It seems simple enough for me but no one or no info I can find can confirm or deny that this is how it would work.
  
  Please, if anyone knows if this is how the thing works, save my sanity and convince me to stay with Adobe products to let me know if I'm right and how to get the Firefox plug in.
  
  Thank you!
  
  

  My dear think;

  Thanks for the reply, you're right that it's as simple as that.

  I'm a little confused how this is a good solution, if you need to have on your mobile machine Ct, you would also be more or less must have Dw there (if you use the Web Premium package), then why would you also need of a plugin Firefox?

  I have this huge and capable package on iMac and laptop family but I am not allowed to use one of his abilities, even the smallest, or a plug-in compatible with, a third machine. So far from home, I have to either spend a lot more money on another piece of software for the few times of the year I travel, or return to raw html in a basic text editor and an ftp program. All I want to do is change one page per day with some new features.

  Shaking his head with frustration at Adobe.

• Hi can anyone please help me: not irritable need a simple solution

  My iplayer from the bbc said suddenly its HTML5 and I need flash player for the OD programs, or direct progs say he can't play, you need flash player. Ive checked and I have flash player and its uptodate. IPlayer played until 18:00 last night and then stopped WHY?

  What I'm doing wrong or what should I do to get the iplayer to recognize the flash drive? any help gratefully received

  Flash needs updated frequently for questions of security and Apple blocks older versions to protect against vulnerabilities. You need to update Flash Player, only to Adobe own website, never anywhere else or pop - ups that may appear. Go to https://helpx.adobe.com/flash-player.html and check if you updated in step 1 and if not go to the link in step 2 to download the installation program.

• I need a simple editing program.  PDF issues, too

  I worked on Word and found it very frustrating.  I have used Appleworks many years ago.  Is there something similar out there?

  Is QuarkExpress or editor?  I put photos and other images in the document and try to make it attractive.

  Also, when I recorded the Word document in pdf format he enormously expanded the program.

  Help!

  Hello

  I highly recommend PageStream, simple enough for an application that can do so many things...

  http://Pagestream.org

• Need PCI Simple Communications Controller driver for Win7 for Portege A600-122

  Hello

  I put Windows 7 x 64 on my Portege A600-122 and have a "PCI of Simple Communications controller" in Device Manager. It seems that it is because the Intel AMT (Active Management Technology) driver is not installed.

  I am struggling to find it, there is a [driver Windows 7 x 86 | http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]

  and a [driver Vista x 86: http://uk.computers.toshiba-europe.com/innovation/jsp/autoDetect.do?service=UK&ACTION=PROCESS_DETECTION& TYPE = FORWARD & SOURCE = SMP & COUNTRY = 242 & RQS = TRUE & MODEL = PORTEGE + A600 & SERIES = X8100601H & service = UK & LOCAL = & OSBUILD = 7600 & SUB_TYPE = SMP & OSBITSIZE = 64, & PANUMBER = PP A61E - 008008EN & ERROR = 0]

  but I can not find a driver Windows 7 x 64, will make one of the above, or there at - it another link to the x 64 driver?

  Thank you

  Hello

  Please, try to download and install:

  http://www.DriverCure.com/driver/driver_captcha.php?device_driver_id=5CFDA707-11B0-4FEC-8C89-65E3E4EA9AFD