Need help setting up network RV180
Hello
We have an active service test/repair devices IP Center. A simple test of PC application communicates with devices via UDP packets. I need to configure my test intranet envirement exactly as production. My problem is that I can't solve my network addressing. Note: IP configuartion peripheral Test should not be changed, the test application must be able to ping 10.90.206.34
* Host PC *.
IP 192.168.60.86
subnet 255.255.255.0
* Test device * (cannot be changed)
IP 10.90.206.34
subnet 255.255.255.240
Gateway 10.90.206.33
Can anyone recommend how I can us a RV180 (or several) to solve my problem?
See you soon
Steve
Steve,
Excellent happy you guessed it work.
First thing that strikes the second problem is that it is another subnet. Why don't you just create a new vlan on the router. You can have 4 VLANS on routers. You can have them both going at once then. You can also consider opening a new thread on the new problem.
Thank you
Tony
Tags: Cisco Support
Similar Questions
-
Need help setting up network home (Windows 7 Professional)
I don't know why I have so much trouble with this. I think that I never properly put in place a network before. Usually, I just turn on my router with a password, and then the phone and other devices connect directly to the router. I just got a new computer with Windows 7 Professional and it is prompting me to create a home network - and have apparently created a new password for the 'network' that is different from the password for the router. I have a feeling that this will be easy, but I do not get set up correctly.
First question, in the instructions to configure the network at a time given, was asked if all "clients" had a "wifi protected setup" button
What is a 'client' on the network? My router Linksys has one of these buttons (I pushed him, but he could not get connect/setting up with Windows 7). Is a router from a client? If so, a client what? (I do not understand the use of the term client.)
Here's what I would do. I have internet entering a cable modem. Ethernet to the modem router Linksys WRT54G. (I don't remember the exact model. It has a button "wifi protection setup. Ethernet to the router to the desktop. The router's Ethernet compatible HP printer wifi (which is currently on its own network). The Windows account has two users (mine, of my wife). The goal is to have a single network, with the office and the connected printer, and who I can connect with my iPhone. And I want to be able to print wireless from my iPhone to the printer.
Here's what I did. There is a lot of information, but if all goes well it will prevent additional questions.
I have reset the router and went to the 192.168.1.1. page. In the Administration tab, I created a new password - which I thought was the password for the network. I was not the case. In the wifi tab, I looked for a place to put a password, but could not find one.
I went on the computer, the network options in Control Panel to add a new network. I was able to get a new network with the computer (LAN) connected to the router, but I couldn't get wifi to set up. He told me to press the setting button of protection wifi on the router, but after a long delay, he said that he could not establish a connection. Finally, I got a message (I don't know how) if I wanted to connect older devices to the network, I need to put a code - 12 letters/numbers with dashes. I don't know what types of devices called it. So, I found in managing network a "network key" tab It was the same code - and it also seemed to work as wifi password. But I can't change it to something that is possible to remember.
And I can't do the printer on the same network as the computer.
I guess I'm going something wrong. Can someone point me in the right direction?
It seems that if the printer is in 'ad hoc wireless' mode - it is just sitting there with his wi - fi enabled: indeed, 'here I am; connect to me if you want to print. »
You need to connect the printer to the network wireless router. It's pretty easy, but if you want a specific rather than general instructions, please provide the exact model of your HP printer.
Generically, see--> http://www8.hp.com/us/en/campaigns/wireless-printing-center/printer-setup-help.html , you will probably end by using the option of 3rd or 4th. In step 4 of the "HP Wireless Assistant', 'the WEP key or a WPA password' is the 'wifi password on the router" - which really, you must configure except if the House really is miles from any other civilization.
"Referring to the first paragraph above, what I called the mode"ad hoc"seems to be what HP calls impression of"peer-to-peer"." More specifically, in the FAQ at this link, your printer seems to currently be configured as described in "how to print wireless without a wireless router?
Although he adds a little more complexity, I highly recommend that - after that you get things market - you read the FAQ section of HP on "a static IP will keep my computer against the loss of communication with my printer wireless." In an environment with multiple wi - fi devices (for example, several iPhones), if the printer is turned off for a while, when you turn it back on it you will find that your computer will display is no longer her. Print jobs will appear to work, but nothing will print. If this situation arises, the solution is this FAQ section.
-
Need help setting up related content in HCM 9.1 PeopleTools 8.51
I need help setting up related content in HCM 9.1 PeopleTools 8.51.
I created a new service id in 'Set Related Content Service'. Its simple, it basically goes to google.com.
Then I assigned Related Content for the Application Pages on the page «Manage the Configuration content to related» I'm my scenario, I've added it to the careers under the main menu.
Then I went to the careers page, but the 'related information' link does not appear. How can I get this link to related information to appear at the top of the page/component?
Thank you
-CoryIn order to get it work, there are a few basic server configuration requirements that you need in order to make it work.
(1) define the field of authentication on the Web server
(2) set the authentication of domain on the web profile
(3) enable Single Sign-OnThe next in "My Oracle Support" document provides details on configuring content services.
E-PORTAL: how to set up content related services. [984855.1 ID]
In addition, here is a link to the PeopleBooks online that deals with the configuration of related content services.
http://download.Oracle.com/docs/CD/E18083_01/pt851pbr0/Eng/psbooks/tprt/book.htm?file=tprt/htm/tprt20.htm#H3002
In addition, there are also some know the limitations to the use of related content are different depending on the version of the tools you use.
I hope this helps.
-
I need help setting up my home network - windows vista.
I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.
Original title: help w / home network
Hi Luvy,
Thanks for posting your query in the Microsoft Community Forums!
Looks like you need information to set up home networking on the windows vista computer.
We're here to help and guide you in the right direction.
-What is the number of brand and model of the computer?
I suggest you to return the items online help and check if it helps.
Setting up a network home
http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network
Setting up a wireless network
http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network
To install the printer on the network see Help below articles.
Install a printer on a home network
http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network
Share a printer
http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
BlackBerry Smartphones Newbie needs help setting up email
Hello world
I've been the proud owner of a "BOLD" for about 48 hours now. This is my first Blackberry, so please bear with me.
I need to set up my Yahoo email. I remember setting up front, but I deleted it as my allowance for the use of network (3 Australia) showed 2 MB roaming allowance, of which half was used in one day.
I think that the e-mail message has been implemented via a browser page, but I can't go back to this page. The e-mail setup wizard seems to be to the establishment through BES which I did not. Does anyone know the address of the page?
I also remember, when I chose the browser (not of Planet 3) I was taken in a BB page that showed several options of setting up various things. There were about 5 or 6 boxes grey listed above the other? Anyone also know the address of the page for this?
Thanks for any help,
Paul
You also see a personal Email Setup on the device icon? If not try going into the Options | Advanced options | The host routing table. In this screen press press the button menu and choose to register now. See if you receive a message from check delivered to your device. Subsequently, reset the unit by removing the battery for 30 seconds. See if you have this icon now after restarting the device. If you still don't you can try setting up the account again on your carrier's Web site BIS to add return e-mail accounts?
What options do you remember on this Web site? Try to go to mobile.blackberry.com on your browser and see if it's the page.
-
Hello
I forgot that my administration windows log password after the holidays. I have loaded down a free program called Ophcrack and had set my laptop to boot from cd 1 but I just cannot get the laptop to boot from a cd. He just continued boot from the internal hard disk.
The cd is an image and it is bootable on my desk.
The model of laptop: laptop HP ENVY m6
Product number: C2N77UA #ABL
BIOS version: F.25
Processor type: Intel Core i7-3632QM CPU @ 2.20 GHz
OS: Windows 8.1
I only did a password reset disk (I'm learning the hard way now!).
I don't want to do a "System Recovery" because I have some data on it.
I realize there are paid there password recovery tools windows, but I would like to use this 'free' program to try to break 1.
I just need help / instructions to set the bios for laptop can be started from a cd. I also tried to boot from a key USB but the laptop kept begin its internal drive.
Help, please. Thanks a ton!
Ted
Hi Ted,
You are welcome
Boot into the bios menu and go to the very section where you have disabled the Secure Boot.
Find an entry called materials and this value to Activate.
Save the changes and exit the bios.
Follow the previous procedure below:
Insert the bootable disc of Ophcrack and laptop stop.
Tap away at the esc you key start Notepad to open the Start Menu. Select boot options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER. You can also get a prompt to "Press any key to" continuous - it if requested.
Kind regards
DP - K
-
try to set up my microsoft email in my pc. I need to respond to the need help sbout incomeing craiglist.i and out going.
I have no idea to find my server address. I use connect netgear wireless.
Hello
Looks like you need configure Windows Mail
you need to configure your e-mail account windows mail with your ISP internet service provider
They provide you with account settings you need to do
Ask them to
username
password for your access broadband account / distance with themServer of incoming POP3 mail
outgoing mail SMTP serverand here's how to configure windows mail after getting the email correct account settings
-
Hello world
I have a new backup disk (a disk of 5 TB of Seagate) and could use help setting up with CCC.
I did in the past without problem, but I want to assure you of a few things:
- This particular drive has software available in a folder on the disk backup (w / the PC and Mac versions). But... I intend to use this disk as an exact copy of my iMac HD; It must also be bootable.
- Should I format the drive with disk utility? Or load the software to the CCC on the disk and just leave their only backup software?
- One last question: I also have a MacBook Air, an iPad and an iPhone. I want to save them as well. Should I put them on separate partitions, I created? Or can we just one big happy family? The last is best.
One last piece of information: two computers, etc, were all backed up via Time Machine. My data the most important, photos, etc., are also saved on deposit box and/or iCloud on a regular basis.
Thanks for any suggestions or comments!
Sally D.
Delete and partition the drive by making a separate partition for each computer. The iPad and the iPhone is useless their own partition because they back up using iTunes and would appear in the clone of the computer that you use for each save. Each partition must be the size of the current cloned drive that can leave you with additional partitions for other stuff. Then format the drive Mac OS Extended journaled. Do not install any software that came with the drive, none of this is necessary.
I use a very similar setup with a 3 TB drive. I clone my boot SSD in a single partition, my drive internal 1 Tb in a second, my Macbook to a third party, and I have a fourth partition which is currently empty, because I haven't decided what to do with it yet. I also have a 3 to Apple Time Capsule.
-
need help setting up a network for a game
We tried to use a router and its not working! do I need anything else?
Hello CrimsonZombie,
Thank you for posting. It seems that you are having some type of evil, but you left a little certain information.
To help you, I would need to know a few things:1. what version of Vista (32-bit or 64-bit)
2. what game you're trying to read
3. are you a homepage of the network or need assistance to set up a home network
Please let me know these things, so that I can be a help to you more. Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
I just received a more recent laptop and wants to set up a network so I can transfer files back. It seems that it would be a fairly simple network to set up, but obviously I'm missing something.
It must be a wireless network. I have a wireless router, two Toshiba laptops, running a Windows 7 and the other runs Windows 10, and I have a printer. I can access internet with laptops or both if the router does not seem to be the issue.
I read articles that said I had need of a homegroup, but that did not work. Then I read an article saying since my computers running different operating systems, that I couldn't use a homegroup that I should use a workgroup. I followed the instructions given in the article and which don't seem to work either.
The names of working group on both computers are the same and so are the passwords. The computer names are different.
I was on the old computer and when I go into Windows Explorer, under network, I can see the two names listed, however, when I click on the other computer, I get a message saying that the computer is not on the network. I got the internet service at the time so the router was working. Another time I tried to copy a small file to the other computer and the message said I didn't have permissions to do so. I got the same message when I tried to add a folder to the other computer in the network area in Windows Explorer. I get the same types of messages when I try things peers, while on the new computer.
Any suggestions would be greatly appreciated. So far, since I got the new laptop, I spent nearly three weeks, trying to get things to work. This seems to be the biggest challenge of all.
Hi Carole,
Thanks for posting your query in Microsoft Community.
Let me suggest you refer to the article below which will help you to set up HomeGroup from start to finish.
Homegroup from start to finish
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
I need help setting up a network between Windows Vista and Windows 7.
original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER
HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER
Hello
You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows
-
I need help setting up a home network
I have a 7 m DSL connection. Using a modem without phone/ethernet gateway serving a computer office wired ethernet and a wireless laptop, I would like to know if I should put in place a network home ethernet and add a wireless device or I set up a wireless network and add a wired ethernet device. Two computers use Vista Home Premium 64 - bit OS. I have 1 printer and a XBox (wired) and a (wired) DirectTV receiver attached, too.
What is the brand and model of your wireless/ethernet modem access point? It should be able to provide any wireless networks and wired Ethernet network.
Wired Ethernet ports how do I need? If she has enough for all computers and devices that you want to network, you're ready. If not, connect a wired Ethernet switch for more ports.
-
Need help setting up switch SG300-10
Hello
I bought a SG300-10 switch and configuration.
I have a problem to set up it causes that I'm not really used to networking.
what I set up at the moment is the VLAN.
VLAN 2 - step my router it for internet access
Vlan10 - is for my server and pc in my office
VLAN 40 - is for the wifi of comments.
I will use the mode switch layer 3 and I want to configure a DHCP server on the vlan 40 but I'm not very well how to do. I activated the DHCP and created a pool of ip but how I assign on the vlan 40? and how to set up everything to go on the internet? If I followed the basic logic, I will put all my members of port of vlan 2, is that correct?
IM new in the field of networking
Thank you
Hi Justin,
Here is some basic information for the switch. With VLAN, it is tag VLAN and remove the brand VLAN. A package of UNTAG means in the package header, there is no VLAN ID. The switch will provide separate from the client connection based on the transfer of bridge table. Usually UNTAG VLAN is used for the client connection. A beacon packet contains the VLAN ID in the header. In general, tag packets is used between other network device. An access port is member of 1 VLAN that is not marked. A trunk (on small business product) port is a port that has 1 UNTAG VLAN (VLAN native) and has the ability to tag the VLAN extra.
Some examples of configuration CLI for tag and remove the brand VLAN. Keep in mind, VLAN 1 is the default VLAN, therefore, unless you make sure, VLAN 1 will default.
To create a VLAN 2 on your switch
Configure the terminal
database of VLAN
VLAN 2,3,4
This will create the VLANs 2, 3 and 4
To configure an IP address to a VLAN
Configure the terminal
interface vlan 1
IP 192.168.1.254 255.255.255.0
interface vlan 2
192.168.2.254 255.255.255.0
interface vlan 3
192.168.3.254 IP address 255.255.255.0
interface vlan 4
IP 192.168.4.254 255.255.255.0
Keep in mind, VLAN 1 must have a static IP address before you assign any other VLAN an IP address, or the switch will "lock".
To assign an access as a member of the VLAN 1 port
Configure the terminal
Article IG1 interface
switchport mode access
To assign an access as a member of VLAN 2 port
Configure the terminal
interface hi2
switchport mode access
switchport access vlan 2
If you check the GUI you'll notice port 1 is "1u" and port 2 is "2u".
To create a trunk and assign some VLAN-
Configure the terminal
interface IG3
switchport mode trunk
switchport trunk allowed vlan add 2
In the GUI, you will notice 3 port will be "1u, 2 t".
To configure a port to have a VLAN different other that 1 as it removes the brand on a chest.
Configure the terminal
interface IG4
switchport mode trunk
switchport vlan trunk native 2
switchport trunk allowed vlan add 3.4
On the GUI, it will show '2u, 3 t, 4 t'
Now that we have fundamental port assignment of the road, you can work on DHCP and IP address management.
When the switch is in mode layer 3, if there is an IP address assigned to a VLAN, it is a switch virtual interface (SVI). The IP address of the service VLAN as default gateway which connects to this VLAN. The switch can associate the pool DHCP IP interface created on the switch-based layer 3.
Firstly, we must establish your first jump of the switch - the default gateway of the switch statement. If you have a router connected to the SG300 you must assign the SG300 default gateway, which is the IP address of the router.
Configure the terminal
Default IP gateway 192.168.1.1
Then you can concentrate on your DHCP scope. To configure a server DHCP table here is an example-
network IP dhcp pool PRODUCTION
address 192.168.2.1 low high 192.168.2.253 255.255.255.0
Infinite rental
default router 192.168.2.254
dns-Server 8.8.8.8
This basic table DHCP said many things.
The name of the table is the PRODUCTION, this can be anything you want.
low address is the first IP address that is assignable in the pool while high address is the last
infinite lease means that had not expired DHCP lease
Router by default, it is the most important. It is the default gateway, that the switch will be assigned to the customer. This is very important if you want router between VLAN or upstream of the internet
DNS server, this allows to resolve the name instead of having to use IP only.
Now, if you connect to a computer that is enable DHCP where VLAN 2 is not marked, you should receive an IP address that is assigned by the switch on this computer. Notice that the pool is a number of address IP 2 VLAN. The definition of IP pool, this is how it will bind to one VLAN, by matching the subnet.
Now, once you have all the basic configuration complete, as Marty says, depending on the capacity of your router, it will need to need to support VLAN tagging, interface sub dot1q OR, as Marty has said, it would need static route to allow to your additional subnet route on the internet.
Hope this will help you get on your way.
-Tom
Please mark replied messages useful -
Need help setting up DB Link from my Oracle 11 g XE to SQL Server.
Hello
I am trying to create a link to DB from my Oracle 11 g Express Edition on a Windows XP computer to a SQL Server. Here are the steps I've done so far.
1. creating and setting up a connection to the DB SQL Server ODBC. Baptized SQLSERVER. Authenticated by Windows.
2. updated the listener.ora. See below.
3. updated the tnsnames.ora. See below.SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (SID_NAME = PLSExtProc) (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server) (PROGRAM = extproc) ) (SID_DESC = (SID_NAME = CLRExtProc) (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server) (PROGRAM = extproc) ) (SID_DESC = (SID_NAME = SQLSERVER) (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server) (PROGRAM = hsodbc) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) ) ) DEFAULT_SERVICE_LISTENER = (XE)
4. copy C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initdg4odbc.ora to C:\oraclexe\app\oracle\product\11.2.0\server\hs\admin\initSQLSERVER.ora and has changed. See below.XE = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE) ) ) EXTPROC_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) ) (CONNECT_DATA = (SID = PLSExtProc) (PRESENTATION = RO) ) ) ORACLR_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) ) (CONNECT_DATA = (SID = CLRExtProc) (PRESENTATION = RO) ) ) SQLSERVER = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT=1521)) ) (CONNECT_DATA = (SID = SQLSERVER) ) (HS = OK) )
5 restarted listener.# This is a sample agent init file that contains the HS parameters that are # needed for the Database Gateway for ODBC # # HS init parameters # HS_FDS_CONNECT_INFO = SQLSERVER HS_FDS_TRACE_LEVEL = off # # Environment variables required for the non-Oracle system # #set <envvar>=<value>
6. link of database created by using the following command.C:\>lsnrctl stop LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33 :51 Copyright (c) 1991, 2010, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) The command completed successfully C:\>lsnrctl start LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 18-SEP-2012 11:33 :54 Copyright (c) 1991, 2010, Oracle. All rights reserved. Starting tnslsnr: please wait... TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production System parameter file is C:\oraclexe\app\oracle\product\11.2.0\server\network\ad min\listener.ora Log messages written to C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\list ener\alert\log.xml Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc ))) Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521))) Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ ction Start Date 18-SEP-2012 11:33:57 Uptime 0 days 0 hr. 0 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Default Service XE Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a dmin\listener.ora Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\PHAILORTD000012\li stener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc))) (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521 ))) Services Summary... Service "CLRExtProc" has 1 instance(s). Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service... Service "PLSExtProc" has 1 instance(s). Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service... Service "SQLSERVER" has 1 instance(s). Instance "SQLSERVER", status UNKNOWN, has 1 handler(s) for this service... The command completed successfully
7. test usingcreate database link sqlserver using 'SQLSERVER';
I followed the steps in this link but do not know where I was wrong. Someone can help me.select * from "dbo.mytable"@sqlserver; ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535 ORA-02063: preceding 2 lines from SQLSERVER select * from dbo.mytable@sqlserver; ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535 ORA-02063: preceding 2 lines from SQLSERVER select * from mytable@sqlserver; ORA-28545: error diagnosed by Net8 when connecting to an agent Unable to retrieve text of NETWORK/NCR message 65535 ORA-02063: preceding 2 lines from SQLSERVER
http://www.DBA-Oracle.com/t_heterogeneous_database_connections_sql_server.htm
Thank you
AllenHS messages should go here: heterogeneous connectivity
No problem with this type of installation.
A glitch in your specific configuration
>
(SID_NAME = SQLSERVER)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = hsodbc)11 g, the executable file is dg4odbc.exe, so you have read PROGRAM = dg4odbc. (I could reproduce the error with wrong program setting).
-
Need help setting up a configuration of VLAN special using WRVS4400N
Hi guys,.
I need your help on how to implement a configuration of VLAN somehow non-standard.
The situation is the following:
The customer wants a WLAN set up for the company and the other for guests. Now, wouldn't that be not so difficult if we'd be using the internal internet connection. But the WRVS4400N will be used to implement wireless LANs / VLAN only.
The company uses the DHCP protocol on both of their subnets, provided by a Watchguard Firebox XTM510.
Now, what we would do is set up the back door #1 for the connection to the subnet of the client and the #2 for the connection to the optional subnet for the guests. The first problem is that we were not able to configure DHCP forwards to the VLAN2. It works very well on the 1st but the 2nd doesn't allow that either ENabled or disabled, grayed out DHCP.
To work around the problem that he would be allowed to set up DHCP WRVS4400N providing in itself for the subnet invited, but try that didn't work at all.
Is it possible? Thanks in advance!
Best,
Ralph.
Maybe you are looking for
-
Verizon jumps Galaxy S2 to the first Droid (Nexus)
http://www.BGR.com/2011/08/29/Verizon-Wireless-exclusively-launching-Samsung-droid-Prime-in-October/
-
Impossible to update: error message on the BITS and ActiveX
I need to hurry and to know what is wrong bc I have service pack 1 at the moment and I need service pack 3 b4 the deadline. * Title *.When I'm tryin g install my updates, he failed for the FORESTS of the installation. Now when I upgrade from windows
-
How can I get Windows Vista Home Premium 64-Bit installed on Windows 7 Home Premium 32 - Bit?
I decided to install Windows 7 on my computer for the 30 day free trial, but am now regretting it. I don't have the money to buy the product officially, so I want to reinstall my windows vista. I have the drive, but when I try to install the computer
-
My daughters wedding bee has put it on a dvd and downloaded on the desktop but too big to send I can to send it abroad and compact put a help appreciated on facebook
-
Logon remote blackBerry 10 for Mac
Hello I want to be able to connect remotely to my Mac from my Z10 so that I can access my browser and connect and discover my iCloud account for access to "Find my iPhone" and follow the iPhone of my son 5. The Blackberry 10 browser is not supported