Need help to provide a page for the Oracle PeopleSoft HCM on internet

Similar Questions

• Need help in providing an interface for drive HARD Toshiba MK2035GSS

  Hello, is there anyone who can (and want) to help by providing an interface (e-card) or a functional HDD full, with following specifications:

  Toshiba mk2035gss
  hdd2a30 zw01 s c

  The part number is irrelevant, because under the same code p/n, Toshiba distributes hdd different types with the same capacity.
  I need to recover data from a failed hard drive, it seems that only the circuit board has been affected by an external power supply (probably) faulty suply.

  As a matter of fact, the HARD drive is under warranty, but recovery of the info is (as usual) more important than losing the warranty.

  I tried very hard to find a similar pattern, but it seems that this drive is a single (probably specifically made for me, to make me hate my luck :(
  Even on ebay, there are 2 models that are very close, but not this one.

  If you could help, please contact me by e-mail at [email protected]

  Thank you very much

  Costin.

  I don't know what must be unique on this Toshiba HDD.
  Is there a difference when compared with similar hard drives produced by different manufacturers?

  Have you tried to talk with the Toshiba authorized service provider? Maybe they have a good idea of how to help.

• Need help with a query complex for the production database

  Hello again,
  
  I need your help once again, for a query how to show me how long each stage of production is by order.
  See examples of data and what I expect.
  Thank you all for your help.
  
  We use Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  
  Here the example data tables:

  CREATE      TABLE      TABLE_2
     
  (     "ORDER_NR"      VARCHAR2 (12)
  ,      "PRIORITY"      VARCHAR2 (2)
  ,      "WO_STEP"      VARCHAR2 (1)
  ,      "STEP_DATE"      DATE
  );
  
  CREATE      TABLE      TABLE_1
  (     "ORDER_NR"           VARCHAR2     (12) PRIMARY KEY
  ,      "PRIORITY"           VARCHAR2      (2)
  ,      "CREATE_DATE"      DATE
  ,     "ACT_STEP"          VARCHAR2     (2)
  ,     "STEP_DATE"          DATE
  ,     "EMPLOYEE"          VARCHAR2     (5)
  ,     "DESCRIPTION"     VARCHAR2     (20)
  );
  
  INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,      CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION) 
                      VALUES           ('1KKA1T205634',     '12',          TO_DATE('10-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'),     'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'),     'W0010',     'CLEAN HOUSE');
  INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,     CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION)
                      VALUES           ('1KKA1Z300612',     '12',          TO_DATE('08-FEB-13 14:00:00','DD-MON-RR HH24:MI:SS'),     'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'),     'K0052',     'REPAIR CAR');
  
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'A',          TO_DATE('12-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'S',          TO_DATE('21-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'R',          TO_DATE('21-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1T205634',     '12',          'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'A',          TO_DATE('12-FEB-13 13:52:42','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
  INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                      VALUES           ('1KKA1Z300612',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
  COMMIT;

  And here's what I expect of my request:
  

  SYSDATE     28.Feb.13 14:00                                                                                     
                                                                                            
  ORDER_NR     PRIORITYCREATE_DATE     STATUS     STATUS_DATE     DESCRIPTION     AGE_1     AGE_2     WAITNG     STEP_A     STEP_B     STEP_C     STEP_5     STEP_K     STEP_E     STEP_F     STEP_S     STEP_R     
  1KKA1T205634     12     10.Feb.13 10:00     U     28.Feb.13 12:00     CLEAN HOUSE     18,083     8,833     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666     0,042     7,125     
  1KKA1Z300612     12     08.Feb.13 14:00     F     20.Feb.13 16:00     REPAIR CAR     20,000     16,042     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666          

  And now the explanation for the result of the query:
  The AGE_1 is the difference in days between the "CREATE_DATE" and if EXSIST L'ETAPE 'U' then STEP_DATE or if the STEP 'U' is not found in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
  The AGE_2 is the difference in days between the STEP "A" STEP_DATE and IF EXSIST L'ETAPE 'R' then STEP_DATE or if the STEP 'R' is not in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
  The EXPECTATION is the difference in days between CREATE_DATE and STEP 'A' STEP_DATE
  The following columns indicate the days, how long the ORDER_NR remains in these TIMES, if an ORDER_NR comes in the same STEP should be calculated together more than once.
  If the ORDER_NR jump a step, it should show a zero in the specific field.
  
  I hope that my explanation is good enough, my English skills are far from good.
  
  Thank you for all your help.
  
  Hosts Reinhard W.

  Solomon Yakobson says:
  Just add the amounts:

  In fact, you could edit all CASES:

  with t2 as (
              select  t.*,
                      lead(step_date) over(partition by order_nr order by step_date) next_step_date
                from  table_2 t
             )
  select  t1.*,
          nvl(
              max(
                  case t2.wo_step
                    when 'U' then t2.step_date
                  end
                 ),
             sysdate
            ) - t1.create_date age_1,
          nvl(
              max(
                  case t2.wo_step
                    when 'R' then t2.step_date
                  end
                 ),
             sysdate
            ) - t1.create_date age_2,
          sum(
              case
                when t2.wo_step in ('B','5') then t2.next_step_date - t2.step_date
              end
             ) step_b_5,
          sum(
              case t2.wo_step
                when 'C' then t2.next_step_date - t2.step_date
              end
             ) step_c,
          sum(
              case t2.wo_step
                when 'K' then t2.next_step_date - t2.step_date
              end
             ) step_k,
          sum(
              case t2.wo_step
                when 'E' then t2.next_step_date - t2.step_date
              end
             ) step_e,
          sum(
              case t2.wo_step
                when 'F' then t2.next_step_date - t2.step_date
              end
             ) step_f,
          sum(
              case t2.wo_step
                when 'S' then t2.next_step_date - t2.step_date
              end
             ) step_s,
          sum(
              case t2.wo_step
                when 'R' then t2.next_step_date - t2.step_date
              end
             ) step_r
    from  table_1 t1,
          t2
    where t2.order_nr = t1.order_nr
    group by t1.order_nr,
             t1.priority,
             t1.create_date,
             t1.act_step,
             t1.step_date,
             t1.employee,
             t1.description
  /
  
  ORDER_NR     PR CREATE_DA AC STEP_DATE EMPLO DESCRIPTION      AGE_1      AGE_2   STEP_B_5     STEP_C  STEP_K     STEP_E     STEP_F        STEP_S     STEP_R
  ------------ -- --------- -- --------- ----- ----------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
  1KKA1T205634 12 10-FEB-13 U  28-FEB-13 W0010 CLEAN HOUSE 18.0833333 10.9583333      4.875 .083333333 .208333333      2.125 .666666667 .041666667      7.125
  1KKA1Z300612 12 08-FEB-13 F  20-FEB-13 K0052 REPAIR CAR   44.252338  44.252338      4.875 .083333333 .208333333      2.125
  
  SQL>
  

  SY.

• Need help to decode javascript tag for the release of HTML5.

  Hi all

  I'm working on a project in Adobe captivate 7 64 bit which consists of approximately 500 slides with most of the slides in text and image. The problem that I face is very unusual that I guess I'm the first to discover (according to my searches on google and the forums). So, after I publish my project the output works very well in html (local and online) BUT when I run index.html (i.e., out of HTML5) the course is not running and the screen is blank.

  After spending a week on the search online and using the strategy of trail and error, I was able to know that it was the text of the URL "F:\usrnew\purchase" placed in the middle of the course which caused damage of all. However, the url has been removed and the project has been submitted.

  After extra time, I discovered that the "\u" letter which is a JavaScript tag was causing the problem for the release of HTML5. I don't really know much to script, but discovered that the tag can be decoded using a programming strategy. Now, this is where my knowledge comes from a standby and needs a lift from you guys.

  Any ideas, help, sharing of knowledge would be very useful to me and all who could deal with this problem in the future.

  Looking forward for your point of view.

  Kind regards

  Mirza

  Voila! The problem is resolved.

  Solution: Change the single slash "------" to a double slash "\".

  See you soon,.

  Mirza

• Need help finding a specific part for the predator

  I am looking for the metal clip that holds the 2280 m2 card into the top slot (for the 22110 m.2).  There must be somewhere, I don't know where.  Its killing me.

  

  Ok.  I'm not doubting you, but the only thing that I have to go is the official specification.  I don't have your computer model and I don't have an ssd M.2 22110 to see if it would fix it properly.

  In any case...

  Here is the official specification for G9_791 and G9_792 and B21

  

  

• Need help to configure Auto-start for the database

  Hello
  
  DB version: 11.2
  OS: RHEL 5
  
  Please help me
  I want to configure the database and listener in auto-start during the startup process of the operating system.
  
  Concerning

  Step 1 of the oracle user

  CD $ORACLE_HOME/bin
  VI dbstart
  VI dbshut

  changed the

  LISTENER_ORACLE_HOME = $1

  TO

  LISTENER_ORACLE_HOME = $ORACLE_HOME

  Step-2 of the root user

  VI /etc/init.d/dbora

  #! / bin/sh

  Oracle # these scripts runs the listner and Oracle database server.
  #
  # chkconfig: 345 81 81
  Description #: this is the Oracle
  #

  # Define ORA_HOME as equivalent to the ORACLE_HOME
  # from which you want to run dbstart and
  # dbshut
  # the value ORA_OWNER to the userid of the owner of the
  # Oracle in ORA_HOME Server

  ORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  ORA_OWNER = oracle

  If [! f $ORACLE_HOME/bin/dbstart]
  then
  echo "Oracle startup: cannot start.
  Output 1
  FI

  case '$1' in
  'Start')

  # Run Oracle databases:
  # The following command assumes that the oracle connection will encourage not the
  user # all values

  known - $ORA_OWNER - c "start ORACLE_HOME/bin/lsnrctl $".
  Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbstart.
  ;;
  'stop')

  # Stop the Oracle databases:
  # The following command assumes that the oracle connection will encourage not the
  user # all values

  known - $ORA_OWNER - c "judgment of $ORACLE_HOME/bin/lsnrctl.
  Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbshut.
  ;;
  ESAC

  Exit 0

  Note: Please check your ORACLE_HOME

  Step-3 of the root user

  chmod 755 released
  chkconfig released on

  VI/etc/oratab
  ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

  Step 4 Test the automatic start of the root user

  stop /etc/init.d/Dbora
  stop /etc/init.d/Dbora

  Or

  Restart the server

  You can also view
  http://www.Oracle-base.com/articles/Linux/automating-database-startup-and-shutdown-on-Linux.php
  http://docs.Oracle.com/CD/E11882_01/server.112/e10839/strt_stp.htm#BABGDGHF

• I need help to find my password for the certificate to sign a document

  Anyone know how I can access my password certificate to sign a document to adobe acrobat?

  Hey patriciav41001663,

  Which version of reader you use?

  In MS Reader, simply click on the Tools tab and click tool certificates to digitally sign a document.

  

  If you use reader XI, then see following link KB doc on the use of digital signatures:

  Player help | Sign a PDF

  If you already have one, so we cannot provide you with information about your password.

  Please make sure that when you get a certificate that is encrypted password, do you remember the password you may need several times.

  I would like to know if it is useful for you.

  Kind regards

  Ana Maria

• Need help to write a program for the acquisition of signals.

  Hello

  I need to write a program that will do the following:

  1 acquire two signals simulated,

  2. make 10 averages the signal,

  3. filter the signal,

  4. display the signal in its raw form and the power spectrum (fft),

  5. save the data using writing to the file vi

  I tried it for awhile, but there's always something does not... None of the experts LabVIEW here can help me?

  Thank you 1 million.

  -Deet

  No one here is going to do your homework for you. Please join what you have written so far and explain the specific problem that you are experiencing.

• I need help to create a pilot for the Minolta CS and LS-100

  I'm doing a vi to communicate with a Minolta LS/CS-100 meters.  I need a LabView driver for them.  I have attached a few support files.  Can someone help me get a driver to perform simple measures?

  Hi Jallen,

  To do this, you need to make calls to DLLS in LabVIEW.  I have attached a document that will help you to start with the creation of your DLL calls.  This will allow you to communicate with your camera.

  http://digital.NI.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33

  Kind regards

  Marcus

• Need help to create a Script for the labelling of Finder of Indesign files

  Try to find a way to have a script run in InDesign CS4, who tagged a RED text file once it's been imported into InDesign.

  Import multiple text files in an InDesign template. Since there are several text files in the same folder, it must somehow 'delineate' that we have imported this file and move to the next import. I created a 'service' with a keyboard shortcut Automator to label the Red file in the finder, but it would be great if we could have this occurs automatically after we imported in InDesign.

  If import us the text wrong by accident and it gets missed in fermentation, it costs us a lot of money with the printer.

  Thanks for all the ideas.

  Jim

  At its heart, it's what you want to do.

  tell application "Adobe InDesign CS4"
       set placeFile to choose file
       tell active document
            tell selection
                 --Assumes you have preselected the picture or textbox to place file in
                 place placeFile
            end tell
       end tell
  end tell
  tell application "Finder"
       set label index of placeFile to 2
  end tell
  

  You can expand on it pretty easily. The script for InDesign dictionary must be in the Library palette in the Applescript editor and the docs for Applescript are all online.

  If you need further assistance, you may wish to ask someone to write a complete script for you to spec for real moneyz.

  Best o ' luck!

  Eric.

• I need help on a home page. Basic for you but not for me

  Hello
  
  I need help on a home page.
  
  I have this page called themainpage.cfm that someone here asked me to make the homepage of my CF pages.
  
  I have 2 pages now in the test server.
  
  Bloicpage.cfm
  And
  Index.cfm
  
  When you go to
  Server.myappfolders/repfolder
  
  
  It lets you go to
  
  Server.myappfolders/REP/Folder/ Bloicpage.cfm
  
  
  Page.
  
  I need for the themainpage.cfm to be the default when you type
  
  Server.myappfolders/repfolder
  
  
  Then have a link with the Bloicpage.cfm and a "back" button to return to the mainpage.cfm
  
  Thank you very much
  

  If you want themainpage to your page by default, you will need to re-name-the index.cfm. First give your current index.cfm as another name.

• 'Learning' help pages for the user account is empty

  Hello

  I am facing problem when I try to open the user account or types of user accounts or layout help user under 'Discover' page in the user account. White always open the page. I use Windows XP Embedded and got my picture made through Target designer. I had installed the 'Help Center' and Service component and "help and support" but still the problem persists. I can run helpctr.exe without any problem and more on the 'help and support' service is running normally. Future prospects for any solution on this.

  Nitin

  Hi nsrivast,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  This problem may occur if one or more of the Jscript registry key settings are incorrect. This problem can also occur if the Jscript.dll file is missing or damaged.

  (a) click Startand then click run.

  (b) in the Open box, type regsvr32 jscript.dll , and then click OK.

  (c) click OK

  Several dialog boxes are empty

  http://support.Microsoft.com/kb/831430

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• I need help, downloaded adobe flash player for windows 7

  I need help, downloaded adobe flash player for firefox windows 7. I download, I click Run and there is just a small black screen that says on the top of the page install adobe flash player but nothing happens after that. This small screen stays like that for hours maybe days. I tried troubleshooting but nothing seems to work. What can I do? How can I get the installation of the program?

  Use the installation offline programs:

  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

  [topic moved to the forum of Flash Player]

• How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page

  I just noticed that (in comparison to Internet Explorer): in IE, when you preferred a Web page, it uses the actual name of the Web page (for example, for this page, it would be "Ask a Question Firefox Help" as the name of the bookmark), but in Mozilla, it uses the URL as the name of the bookmark. I was wondering if it was possible to change my Mozilla settings so that it uses the name of the Web page as the bookmark name instead of the URL? I hope that everyone understands what I am getting? If anyone can help me, I would really appreciate it. Thank you.

  Firefox uses the tag title for the name of the newly saved bookmark.

  When I bookmark on this forum page I get this for the 'name' of the bookmark.

  How can I get Mozilla to use the name of the page for the name of the real instead of the URL bookmark when I bookmark a page | Firefox Support Forum | Firefox help