I need help to create a pilot for the Minolta CS and LS-100

I'm doing a vi to communicate with a Minolta LS/CS-100 meters. I need a LabView driver for them. I have attached a few support files. Can someone help me get a driver to perform simple measures?

Hi Jallen,

To do this, you need to make calls to DLLS in LabVIEW. I have attached a document that will help you to start with the creation of your DLL calls. This will allow you to communicate with your camera.

http://digital.NI.com/public.nsf/allkb/DCB90714981A1F148625731E00797C33

Kind regards

Marcus

Tags: NI Software

Similar Questions

Need help to create a Script for the labelling of Finder of Indesign files

Try to find a way to have a script run in InDesign CS4, who tagged a RED text file once it's been imported into InDesign.
Import multiple text files in an InDesign template. Since there are several text files in the same folder, it must somehow 'delineate' that we have imported this file and move to the next import. I created a 'service' with a keyboard shortcut Automator to label the Red file in the finder, but it would be great if we could have this occurs automatically after we imported in InDesign.
If import us the text wrong by accident and it gets missed in fermentation, it costs us a lot of money with the printer.
Thanks for all the ideas.
Jim

At its heart, it's what you want to do.
```
tell application "Adobe InDesign CS4"
     set placeFile to choose file
     tell active document
          tell selection
               --Assumes you have preselected the picture or textbox to place file in
               place placeFile
          end tell
     end tell
end tell
tell application "Finder"
     set label index of placeFile to 2
end tell
```
You can expand on it pretty easily. The script for InDesign dictionary must be in the Library palette in the Applescript editor and the docs for Applescript are all online.

If you need further assistance, you may wish to ask someone to write a complete script for you to spec for real moneyz.

Best o ' luck!

Eric.

Need help to create a workspace to keep my guides and leaders to a predefined dimension.

Need help to create a workspace to keep my guides and leaders to a predefined dimension?

Might be interesting to set up an action to do this.

The next time that you create your folder of the workspace, an action, then you have this will define and at a click of a button you will have the same workspace each time.

I need help to create a mask for a paint to put on a t-shirt.

Right now I use my paintings on t-shirts, but they are square or rectangular images (like the one pictured to the left). When printing on t-shirts, it seems unprofessional.
I would like to use a mask in Photoshop Elements to have the edges of the erasure of the paint in the color of the t-shirt but not smooth (as pictured to the right). It will disappear in a transparent background with a PNG file for the t-shirt to work in various colors.
I would use a mask that looks like a little grunge on the edges, sort of a fuzzy look uneven or similar projections as it fades to transparent edges.
Is there anyone who knows how can I use a mask in Photoshop Elements to achieve this. I tried several tutorials, but I think that they are based on the full version of Photoshop than Photoshop Elements, because some menu choices for masks do not appear in the items when I try to follow the directions.
I can create my own grunge template, but I have no idea how to make a mask and then apply the mask to the image before using it as a t-shirt. I do not feel myself, all I need is the PNG file with transparency on the edges to blend into the color of the t-shirt.
I have attached a model of what I'm trying to do.
I use Photoshop elements 11.
Help, please! Thank you.

hobbiecat wrote:

I would like to know how to save the border as a model for other photos if you have the time to explain.

The model will be a fixed size, so it can only be used on photos of the same size.

For some reason any grunge tutorial framework link now goes to www.2020media.com, and I do not remember what was the last option. In any case, I suppose you have something like that. I created the image on a black canvas by as stated in my previous post.

1. Ctrl-click on the mask to select the black part (or the portion of the picture if you created the image directly on the image).

2. invert the selection so that the transparent border is now selected:

3 copy the selection to the Clipboard (edition > copy).

4. file > new from the Clipboard. This creates the black border on transparent background.

5. save the file as a psd or png. This is the model.

To add the template to a photo:

1. open the template file.

2. Select > all (or Ctrl-A). Copy the selection to the Clipboard (edition > copy).

3. open the photo file and rename it to background layer.

4. Paste from the Clipboard (Edition > paste). You now have this:

5 Ctrl-click on the border layer to select the border.

6 activate the image layer and delete the selection:

8 remove the border layer.

9. save the image as a png image.

Need help with a query complex for the production database

Hello again,

I need your help once again, for a query how to show me how long each stage of production is by order.
See examples of data and what I expect.
Thank you all for your help.

We use Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

Here the example data tables:

CREATE      TABLE      TABLE_2
   
(     "ORDER_NR"      VARCHAR2 (12)
,      "PRIORITY"      VARCHAR2 (2)
,      "WO_STEP"      VARCHAR2 (1)
,      "STEP_DATE"      DATE
);

CREATE      TABLE      TABLE_1
(     "ORDER_NR"           VARCHAR2     (12) PRIMARY KEY
,      "PRIORITY"           VARCHAR2      (2)
,      "CREATE_DATE"      DATE
,     "ACT_STEP"          VARCHAR2     (2)
,     "STEP_DATE"          DATE
,     "EMPLOYEE"          VARCHAR2     (5)
,     "DESCRIPTION"     VARCHAR2     (20)
);

INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,      CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION) 
                    VALUES           ('1KKA1T205634',     '12',          TO_DATE('10-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'),     'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'),     'W0010',     'CLEAN HOUSE');
INSERT      INTO      TABLE_1      (ORDER_NR,               PRIORITY,     CREATE_DATE,                                                        ACT_STEP,     STEP_DATE,                                                            EMPLOYEE,     DESCRIPTION)
                    VALUES           ('1KKA1Z300612',     '12',          TO_DATE('08-FEB-13 14:00:00','DD-MON-RR HH24:MI:SS'),     'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'),     'K0052',     'REPAIR CAR');

INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'A',          TO_DATE('12-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'S',          TO_DATE('21-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'R',          TO_DATE('21-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1T205634',     '12',          'U',          TO_DATE('28-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'A',          TO_DATE('12-FEB-13 13:52:42','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 09:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 11:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'K',          TO_DATE('13-FEB-13 12:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          '5',          TO_DATE('13-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'C',          TO_DATE('14-FEB-13 08:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'B',          TO_DATE('14-FEB-13 10:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'E',          TO_DATE('18-FEB-13 13:00:00','DD-MON-RR HH24:MI:SS'));
INSERT     INTO      TABLE_2      (ORDER_NR,               PRIORITY,     WO_STEP,     STEP_DATE)
                    VALUES           ('1KKA1Z300612',     '12',          'F',          TO_DATE('20-FEB-13 16:00:00','DD-MON-RR HH24:MI:SS'));
COMMIT;

And here's what I expect of my request:

SYSDATE     28.Feb.13 14:00                                                                                     
                                                                                          
ORDER_NR     PRIORITYCREATE_DATE     STATUS     STATUS_DATE     DESCRIPTION     AGE_1     AGE_2     WAITNG     STEP_A     STEP_B     STEP_C     STEP_5     STEP_K     STEP_E     STEP_F     STEP_S     STEP_R     
1KKA1T205634     12     10.Feb.13 10:00     U     28.Feb.13 12:00     CLEAN HOUSE     18,083     8,833     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666     0,042     7,125     
1KKA1Z300612     12     08.Feb.13 14:00     F     20.Feb.13 16:00     REPAIR CAR     20,000     16,042     2,125     0,833     4,125     0,083     0,750     0,208     2,125     0,666

And now the explanation for the result of the query:
The AGE_1 is the difference in days between the "CREATE_DATE" and if EXSIST L'ETAPE 'U' then STEP_DATE or if the STEP 'U' is not found in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
The AGE_2 is the difference in days between the STEP "A" STEP_DATE and IF EXSIST L'ETAPE 'R' then STEP_DATE or if the STEP 'R' is not in TABLE_2 then it should show the difference in days between the "CREATE_DATE' and the 'SYSDATE.
The EXPECTATION is the difference in days between CREATE_DATE and STEP 'A' STEP_DATE
The following columns indicate the days, how long the ORDER_NR remains in these TIMES, if an ORDER_NR comes in the same STEP should be calculated together more than once.
If the ORDER_NR jump a step, it should show a zero in the specific field.

I hope that my explanation is good enough, my English skills are far from good.

Thank you for all your help.

Hosts Reinhard W.

Solomon Yakobson says:
Just add the amounts:

In fact, you could edit all CASES:

with t2 as (
            select  t.*,
                    lead(step_date) over(partition by order_nr order by step_date) next_step_date
              from  table_2 t
           )
select  t1.*,
        nvl(
            max(
                case t2.wo_step
                  when 'U' then t2.step_date
                end
               ),
           sysdate
          ) - t1.create_date age_1,
        nvl(
            max(
                case t2.wo_step
                  when 'R' then t2.step_date
                end
               ),
           sysdate
          ) - t1.create_date age_2,
        sum(
            case
              when t2.wo_step in ('B','5') then t2.next_step_date - t2.step_date
            end
           ) step_b_5,
        sum(
            case t2.wo_step
              when 'C' then t2.next_step_date - t2.step_date
            end
           ) step_c,
        sum(
            case t2.wo_step
              when 'K' then t2.next_step_date - t2.step_date
            end
           ) step_k,
        sum(
            case t2.wo_step
              when 'E' then t2.next_step_date - t2.step_date
            end
           ) step_e,
        sum(
            case t2.wo_step
              when 'F' then t2.next_step_date - t2.step_date
            end
           ) step_f,
        sum(
            case t2.wo_step
              when 'S' then t2.next_step_date - t2.step_date
            end
           ) step_s,
        sum(
            case t2.wo_step
              when 'R' then t2.next_step_date - t2.step_date
            end
           ) step_r
  from  table_1 t1,
        t2
  where t2.order_nr = t1.order_nr
  group by t1.order_nr,
           t1.priority,
           t1.create_date,
           t1.act_step,
           t1.step_date,
           t1.employee,
           t1.description
/

ORDER_NR     PR CREATE_DA AC STEP_DATE EMPLO DESCRIPTION      AGE_1      AGE_2   STEP_B_5     STEP_C  STEP_K     STEP_E     STEP_F        STEP_S     STEP_R
------------ -- --------- -- --------- ----- ----------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
1KKA1T205634 12 10-FEB-13 U  28-FEB-13 W0010 CLEAN HOUSE 18.0833333 10.9583333      4.875 .083333333 .208333333      2.125 .666666667 .041666667      7.125
1KKA1Z300612 12 08-FEB-13 F  20-FEB-13 K0052 REPAIR CAR   44.252338  44.252338      4.875 .083333333 .208333333      2.125

SQL>

SY.

I need help to find my password for the certificate to sign a document

Anyone know how I can access my password certificate to sign a document to adobe acrobat?

Hey patriciav41001663,

Which version of reader you use?

In MS Reader, simply click on the Tools tab and click tool certificates to digitally sign a document.

If you use reader XI, then see following link KB doc on the use of digital signatures:

Player help | Sign a PDF

If you already have one, so we cannot provide you with information about your password.

Please make sure that when you get a certificate that is encrypted password, do you remember the password you may need several times.

I would like to know if it is useful for you.

Kind regards

Ana Maria

Need help to provide a page for the Oracle PeopleSoft HCM on internet

Hello
I need help to provide that a page of Oracle PeopleSoft HCM on internet for vacancies may be available for recruitment. How can I provide a Peoplesoft Web page?
TKS
Bruno will read

Of Peoplebooks

Access to external Sites

External candidates, by definition, do not have the nicknames PeopleSoft. To allow external users access to a site, you put a link to the site on a location such as your public Web site. The site definition includes a field to set the URL of this external link.

Deployed in this mode, the instance of PeopleSoft to be accessed by external users must have the appropriate security settings to allow users to bypass the access code. In other words, a user who clicks on the link is not presented with a PeopleSoft signon pages but is instead signed the using a user ID generic comments so that the user can be taken directly to the candidate Gateway.

If an external candidate allows a more inactive candidate gateway session that the timeout you set, the default system behavior is to provide a link to the login page of PeopleSoft with the visible invited user ID. According to your logic of password, the guest user ID might be locked if the applicant tries in vain to connect. For more security and ease of use, replace the code page to a page that displays an appropriate message. For example, to display a message that the session has expired and provide a link back to the bridge of the candidate.

Development of Sites

Need help to decode javascript tag for the release of HTML5.

Hi all
I'm working on a project in Adobe captivate 7 64 bit which consists of approximately 500 slides with most of the slides in text and image. The problem that I face is very unusual that I guess I'm the first to discover (according to my searches on google and the forums). So, after I publish my project the output works very well in html (local and online) BUT when I run index.html (i.e., out of HTML5) the course is not running and the screen is blank.
After spending a week on the search online and using the strategy of trail and error, I was able to know that it was the text of the URL "F:\usrnew\purchase" placed in the middle of the course which caused damage of all. However, the url has been removed and the project has been submitted.
After extra time, I discovered that the "\u" letter which is a JavaScript tag was causing the problem for the release of HTML5. I don't really know much to script, but discovered that the tag can be decoded using a programming strategy. Now, this is where my knowledge comes from a standby and needs a lift from you guys.
Any ideas, help, sharing of knowledge would be very useful to me and all who could deal with this problem in the future.
Looking forward for your point of view.
Kind regards
Mirza

Voila! The problem is resolved.

Solution: Change the single slash "------" to a double slash "\".

See you soon,.

Mirza

Need help with creating table that inserts the lines according to the amount of data

Hello
I try to create a table for supervisors to enter their subordinates of information and inserts lines for supervisors with several of his subordinates. This form is not be connected to a data source, the supervisors will be simply fill out the form and print. I want it sort of look like this:
Name Position # Ranking Hours
I really appreciate any help. Thank you!

Hi Laura,

It's very strange. I downloaded a new version on the site and it works perfectly. The script is in the right place.

I can sugggest you right click on the download link and select "save a copy as" the alternative menu. This should save the form locally and from there, you should be able to open it in Acrobat.

If you are a Mac, make sure that the form opens in preview from Apple.

Also make sure that Javascript is enabled in Acrobat (in the preferences window).

Niall

Need help with creating a Package in the same way

Hi all

I have script for the file package. It's good work, but I need the package on the same path instead of on desktop with file name.
As if the work of the file xyz.idd in D:\ Projects\Today\
I need same location (D:\ Projects\Today\) with the name of the folder as file name (xyz)
Can you change the code, I tried to change but it does not work.
var to = new File ("~/Desktop/package_folder/");
flag of the var = Folder (to) .create ();

var copyingFonts = true;
var copyingLinkedGraphics = true;
var copyingProfiles = true;
var updatingGraphics = true;
var includingHiddenLayers = true;
var ignorePreflightErrors = true;
var creatingReport = true;
var versionComments = 'comment ';
var forceSave = true;

If (flag = true) {}
() app.activeDocument.packageForPrint
TO
copyingFonts,
copyingLinkedGraphics,
copyingProfiles,
updatingGraphics,
includingHiddenLayers,
ignorePreflightErrors,
creatingReport,
versionComments,
forceSave
);
}
Thanks in advance
Kind regards
Siva

myDocument var = app.activeDocument;
var myDocName = myDocument.name;
Temp=myDocName.replace(/\.indd/g,""); "
var myFileNme = temp.toString ();
var myDocument.filePath = myFolder.
var to = new file (MyFolder + "/" + myFileNme + "/");
flag of the var = Folder (to) .create ();
var copyingFonts = true;
var copyingLinkedGraphics = true;
var copyingProfiles = true;
var updatingGraphics = true;
var includingHiddenLayers = true;
var ignorePreflightErrors = true;
var creatingReport = true;
var versionComments = 'comment ';
var forceSave = true;
If (flag = true) {}
() app.activeDocument.packageForPrint
TO
copyingFonts,
copyingLinkedGraphics,
copyingProfiles,
updatingGraphics,
includingHiddenLayers,
ignorePreflightErrors,
creatingReport,
versionComments,
forceSave
);
}

Mi_D

Need help finding a specific part for the predator

I am looking for the metal clip that holds the 2280 m2 card into the top slot (for the 22110 m.2). There must be somewhere, I don't know where. Its killing me.

Ok. I'm not doubting you, but the only thing that I have to go is the official specification. I don't have your computer model and I don't have an ssd M.2 22110 to see if it would fix it properly.

In any case...

Here is the official specification for G9_791 and G9_792 and B21

Need help to configure Auto-start for the database
Hello

DB version: 11.2
OS: RHEL 5

Please help me
I want to configure the database and listener in auto-start during the startup process of the operating system.

Concerning
Step 1 of the oracle user

CD $ORACLE_HOME/bin
VI dbstart
VI dbshut

changed the

LISTENER_ORACLE_HOME = $1

TO

LISTENER_ORACLE_HOME = $ORACLE_HOME

Step-2 of the root user

VI /etc/init.d/dbora

#! / bin/sh

Oracle # these scripts runs the listner and Oracle database server.
#
# chkconfig: 345 81 81
Description #: this is the Oracle
#

# Define ORA_HOME as equivalent to the ORACLE_HOME
# from which you want to run dbstart and
# dbshut
# the value ORA_OWNER to the userid of the owner of the
# Oracle in ORA_HOME Server

ORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
ORA_OWNER = oracle

If [! f $ORACLE_HOME/bin/dbstart]
then
echo "Oracle startup: cannot start.
Output 1
FI

case '$1' in
'Start')

# Run Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all values

known - $ORA_OWNER - c "start ORACLE_HOME/bin/lsnrctl $".
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbstart.
;;
'stop')

# Stop the Oracle databases:
# The following command assumes that the oracle connection will encourage not the
user # all values

known - $ORA_OWNER - c "judgment of $ORACLE_HOME/bin/lsnrctl.
Su - $ORA_OWNER-c "$ORACLE_HOME/bin/dbshut.
;;
ESAC

Exit 0

Note: Please check your ORACLE_HOME

Step-3 of the root user

chmod 755 released
chkconfig released on

VI/etc/oratab
ORCL:/U01/app/Oracle/product/10.2.0/Db_1:Y

Step 4 Test the automatic start of the root user

stop /etc/init.d/Dbora
stop /etc/init.d/Dbora

Or

Restart the server

You can also view
http://www.Oracle-base.com/articles/Linux/automating-database-startup-and-shutdown-on-Linux.php
http://docs.Oracle.com/CD/E11882_01/server.112/e10839/strt_stp.htm#BABGDGHF

I need help to create a group for email on my iPhone (4 people) 6 (IOS 9

I'm trying to set up a group to receive a daily Email from me.

I can't find a way to actually make a group on the 6 m iPhone mail app.

Any help would be appreciated.

Try the steps here:

iCloud: create a group and add contacts

Need help to create a custom for a simple calculation script

I'm looking for a script that will allow me to take the average of several cells, but if the cell is empty, so that it can be ignored.
For example, if I have five cells, and all five have numbers in them, I need the total divided by 5.
But if I have five cells, and four only is filled with numbers, then I want that it just be an average of 4.
I think I have explained well enough, but I would like to know if you have any other questions or need more information.
Cell 1 Cell 2 Cell 3 Cell 4 Cell 5 Average
5 5 3 4 7 (5 + 5 + 3 + 4 + 7) / 5 = avg
5 3 4 7 (5 + 3 + 4 + 7) / 4 = avg
I don't want empty cells is calculated in (I don't want a zero on average), but I need a script that I can apply to several rows as above.

As the custom calculation script 'Dor 1', enter:

calcAverage (["1-1", "1-3", "1-5", "1-7", "1-9"]);

Need help to write a program for the acquisition of signals.

Hello

I need to write a program that will do the following:

1 acquire two signals simulated,

2. make 10 averages the signal,

3. filter the signal,

4. display the signal in its raw form and the power spectrum (fft),

5. save the data using writing to the file vi

I tried it for awhile, but there's always something does not... None of the experts LabVIEW here can help me?

Thank you 1 million.

-Deet

No one here is going to do your homework for you. Please join what you have written so far and explain the specific problem that you are experiencing.

Cell 1	Cell 2	Cell 3	Cell 4	Cell 5	Average
5	5	3	4	7	(5 + 5 + 3 + 4 + 7) / 5 = avg
5		3	4	7	(5 + 3 + 4 + 7) / 4 = avg

I need help to create a pilot for the Minolta CS and LS-100

Similar Questions

Access to external Sites

Maybe you are looking for