Need remote for Stor.E TV +.

Similar Questions

• Need remote for Keynote / MacBook Air

  My presentation remote died. Looking for a replacement recommended to use with 2013 MBA running OS X 10.11.5 and Keynote 6.6.2

  I usually present in the classrooms, but I sometimes present in large rooms. Audio volume control a plus. I have the video project

  Thank you

  If you have access to an iPad or iPhone using Keynote Remote would be the biggest part of what you want.

  I don't remember if the volume control is available. For me, the benefits are the ability to see the next slide (on my iPad) and the ability to 'draw' on the slide to point clearly to one area on the projected image.

• Need firmware for Store.E tv

  Hello!

  I had to format my TV store because I wanted her to be in FAT32, but now I can't find the firmware on the Toshiba support page and my RD StoreE TV does not work on the TV.
  Any way I can find the firmware somewhere?

  Thank you!

  Toshiba is not a good company in terms of support for firmware. The problem is that they post on their site the original frmware nor any upgrade. Known bugs have been identified and... Since that time no response, no solution, nothing. I think that I will no longer buy any product of Toshiba (hard drive or anything else). For your question, it seems strange to me that formatting a HARD drive you have lost the firmware... unless there is something written on the boot record of the Toshiba store which, once lost, does not have the device works correctly.

• I have two monitors, I need remote desktop for my computer at home and be able to see two screens on my home computer, how do I do this?

  I have a laptop with a single monitor.

  I need remote desktop for my computer at home and be able to see two screens on my computer at home.

  How do I do that?

  Original title: dual monitor question

  If you look at 'Options' remote desktop and look at the "View" tab there is a checkbox for "use all of my monitors for the remote session.  You may need to be an administrator to set this option.

  Check out these similar posts too.

  http://www.Google.com.au/search?q=remote+desktop+dual+monitor&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = WgtJUKLeH6mRiQe834DoAw

• Need remote control for Toshiba all-in-One LX830

  Hello

  I recently bought a LX830 11 d for my mother.
  The unit is ex-reparation but don't know if that actually meant to have a remote for the TV feature support.

  If she was supposed to have one then it is absent and dealer is not sure that they are not.
  Is it possible to buy a new remote or if there are compatible options available.

  According to the Toshiba LX830 - 11 d
  Page of the specifications, the remote control Windows Media Center was part of the delivered equipment.
  http://www.Toshiba.EU/discontinued-products/Toshiba-lx830-11d/

  I think that this remote control could be ordered in the Toshiba authorised service provider available in your country.
  Give them a call and ask for this part.

• Need remote control for laptop P20

  When I bought my Tosiba P20 was an ex-affichage model and it has not come with a remote control (it was lost). Anyone know where I can get a replacement remote? If someone could know the part number that would be too big, I had a search via google but had no chance to find.

  Thank you
  David

  Hello

  Generally all Toshiba parts, you can order from EPA (Toshiba service partner) in this case I recommend to contact the ASP in your County to order the compatible remote for your device.

  PS: it would be very interesting to know the name of your unit

  Good bye

• I need remote support to resolve a deadlock on my screen to display the desktop.

  I need remote support to resolve a deadlock on my screen to display the desktop. When I try to grant the permission I get message saying that I have no contacts.  apparently I need a support exxpert email address. How I not get that?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest you get in touch with support chat were we access the computer via remote control and solve the problem.

  http://Microsoft-Chat.com/

  Future prospects for more questions

• Is there any remote for the Sony Alpha a5000 physic?

  Hi I just wanted to know if there are any remote physical (not mobile phone) for the Sony Alpha a5000?

  Thanks in advance!

  Hi guillermoveitia,

  Welcome to the community of Sony!

  Yes, there is a compatible wired remote for the ILCE5000 camera. The model of the remote is RM-VPR1.

  Due to the proximity, I recommend you to visit our global website of Sony to find local stores and dealers in your area, because they are better equipped to help you further: http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Guard application launch at the start of the appliance, also need advice for the implementation of network methods

  Hi all

  I'm new to the development of Blackberry and I'm writing a relatively simple application to run on 7.1.

  So far the development was interesting, I managed to create my user interface using resources online (mainly this forum), but today I tried to implement some of the network classes that I need and now I just met constant problems.

  I use Eclipse SDK 3.7.2 (the one that comes with the plugin RIM)

  First question:

  I'm not sure what I changed, but today I noticed that whenever I start the Simulator (by sim 9360) my application is started during the initial startup process. I don't think he did this before, but to be honest, I wasn't paying much attention. I think it starts at the start of the device is because I put a breakpoint in the constructor for my class from the main screen, which is hit before the Simulator happens even to the point where it is ready for user interaction. In addition, once it is ready, if I press the BB button, I see my registered application.

  I don't have it set to automatic start in .xml descriptior enforcement.

  I started this application on the HelloBlackBerry sample, here is my main method for the entry of the application:

  public static void main( String[] args ) {
          appSettings = AppSettings.fetch();
          // Create a new instance of the application and make the currently
          // running thread the application's event dispatch thread.
          HelloBlackBerry theApp = new HelloBlackBerry();
          theApp.enterEventDispatcher();
          //openConnection();
  
      }
  
  
  

  As far as I know, this is the only entry point for the application.

  More code

      public HelloBlackBerry() {
          // Push a screen onto the UI stack for rendering.
          mainScreen = new ScreenHelloBlackBerry();
          pushScreen( mainScreen );
      }
  

  Here is the method of. my class AppSettings fetch()

      // Retrieves a copy of the effective properties set from storage.
      public static AppSettings fetch()
      {
          AppSettings savedSettings = (AppSettings) _store.getContents();
          return new AppSettings(savedSettings);
      }
  

  Some of this code that I wrote myself, the persistence store cause the launch of my car?

  I tried to reset the Simulator to the factory settings, no change.

  All applications initialized during the startup of the device and then closed shortly after?

  Part 2: Need advice for the implementation of functions of network in the application

  I need to implement some methods that will retrieve data from a web service, and I also need to send data to this service. What I've read, the ConnectionFactory is the way to go. I want my application to make a request when the application is open and can check on a set interval. I didn't know exactly how to go about adding another thread for networking, I understand that network connections should not be created on the thread main event, so I tried to do this:

  The constructor of my class that implements screen (ScreenHelloBlackBerry), I use the following to create a modal dialog box to prompt the user for a username, I also try networking wire in the same segment of spawning:

          public ScreenHelloBlackBerry(){...initialize fields and managers, add it all together...then near the end
  
  //This will open the confirm dialog when the application is launched
          UiApplication.getUiApplication().invokeLater(new Runnable() {
                public void run() {
                    openConfirmDialog();
                  //start connection - Possibly broken
                    ConnectionThread ct = new ConnectionThread();
                    ct.start();
                }
          });
  

  I don't know if it's somehow OK to do, but it seems to work for what I need. I want a user who launches the application at the prompt, and if a user switch applications, when they come back they wondered again (unless they close the app and reopen it).

  Here is my ConnectionThread:

  public class ConnectionThread extends Thread
  {
  
      public void run()
      {
  
            ConnectionFactory connFact = new ConnectionFactory();
            ConnectionDescriptor connDesc;
            connDesc = connFact.getConnection("http://www.google.com");
            if (connDesc != null)
            {
                HttpConnection httpConn;
                httpConn = (HttpConnection)connDesc.getConnection();
                try
                {
                    final int iResponseCode = httpConn.getResponseCode();
                    UiApplication.getUiApplication().invokeLater(new Runnable()
                    {
                        public void run()
                        {
                            Dialog.alert("Response code: " +
                                          Integer.toString(iResponseCode));
  
                        }
                     });
                    httpConn.close();
  
                 }
                 catch (IOException e)
                 {
                   System.err.println("Caught IOException: "
                        + e.getMessage());
                 }
            }
      }
  }
  

  At the moment it has basically unmodified code from a sample that I found, I'll be retooling to meet my needs whenever I can make it work. I HAD this work to the point where, after the closed user confirm this dialog, a few moments later a an alert dialog appears with the 302 response code. I don't know what changed, but now it doesn't work at all, and if I try to scroll with the debugger, I can't past the httpCon.getResponseCode (). I've seen some mistakes earlier on "no record of service was set up", and I also had once a timeout exception.

  I'm sure I'm doing this wrong, but at the same time as I said WAS working, and now it is not. If someone has done this far, thank you very much for your time and advice are much appreciated.

  Also, should I try to start the thread of the network of the UIApplication class instead of the screen? There is currently very little happening in the class that extends UIApplication, do I spend most of my business logic out of the class of the screen and in the UIApplication class?

  Thanks in advance!

  Hi all

  Just to conclude this topic for those who are interested, I found an excellent guide to the implementation of networks in applications of BB, click here for a link.

  About my application being started at the start of the simulator of the device, I found that on a device real this behavior is not complied with, and in addition, the behaviour seems to have stopped after uninstallation and reinstallation of my Simulator.

  See you soon,.

• In need drivers for p6203w.

  Hi, I need drivers for my HP computer.

  M/N: p6203w

  OS: Windows XP 32-bit

  I went to the driver page, and when I walked in my BONES he only pulled up the Lightscribe driver.

  I don't know if I even installed the drivers, everything is very laggy.  It recognizes my CPU and, as he sees them as AMD etc.  I have installed all drivers other than my drivers from the internet.  (Which I have come here to yesterday).

  Any help is appreciated!

  Also, I created a partition on my hard drive, so that I could multiboot with Windows 7/XP (it's why I'm looking XP drivers on a model that comes standard with Windows 7) and I have partitioned 40 GB of space, installed XP on this space, and everything went well.

  The drive is labeled K:

  However, when I download something, I find that I download on C:, which has only 100 MB of space on it.  I'm completely lost here, nobody knows what I did wrong?

  Thank you.

  CotyRSKL wrote: here is what I have in disk management:

  SYSTEM - 100 MB, it is not tagged with a letter.

  HP (C) - 413 GB

  (F) - 39.99 GB

  Factory_Image (d) - 11,94 GB

  I don't know why XP wants to save the partition of 100 MB.  Could I have ruined something?

  Hello CotyRSKL, this information is superb. I must have misunderstood you when I saw it: C: drive called 'SYSTEM ', he said.

  The c: partition is a system partition. The 100 MB partition is also a system partition, which stores the Master Boot Record and other data.

  It is not necessary to return the partitions just as long as the partition of Windows 7 is labeled as C: since it is the default boot partition and you know what really are the other partitions. You know the partition D: is the HP recovery partition and the F: partition is the partition of Windows XP.

  When you download anything, depending on the version of the browser, you should have a place on where to download the data. That will change at any time according to the location of the last download.

  For example, if a download to save to the desktop, then the next time I download something, the system will want to save it on the desktop. I always make sure I know where the download will be downloaded to the computer.

  Apparently, your Internet browser is configured to record the partition of 100 MB. You must change this download location on your system to another. I have a folder that I created in C: "files downloaded, where I save all my files downloaded to.

  Every now and then, I choose to save a file to a different location, for example C:. The next time that I download something it wants to download on C:, so I have to change the download location for files C:\Downloaded.

  This may be your problem.

  You can start on Windows XP, since you mentioned that you have access to the Internet and visit Windows Update and scan your system and download and install all updates for Windows XP. You must check the category that is Non-Critcal of driver updates.

• What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  What do need me for when the sale of an iPhone that won't turn on in order to remove my information?

  If it lights why if someone buy it?

• need manual for time capsule 1 TB

  need manual for time capsule 1 TB

  There are several different versions of the time Capsule 1 TB.

  To obtain the manual right for you, we need the model number of the time Capsule. It's at the bottom of the device, usually embedded in the base of carpet of MOSS. The model number starts with an 'A' follow-up of four digits.

  Can be... A1254... A1302... A1355.

• Do need Firefox for my iPad?

  Do not know if I need this for my iPad,

  Apple will not allow Firefox (or other browser competing engines) on their iOS devices. So unfortunately you can't get Firefox for iPad

• Need drivers for Win98 for Satellite L100 113

  Hello peaples! I need drivers for L100-113 for MS Windows 98... Thank you!

  Unfortunately, you will find not all original Toshiba for Win98 drivers for this device.
  I have goggled autour and it seems that this laptop has been delivered only with Win XP and that is why drivers are not available.
  In addition, the Win98 is a very old operating system and Satellite L100 is designed several months ago. No one is using the Win98 on this laptop. Everyone wants to install the new Vista ;)
  I n t want to dash your hopes, but I don t think that Toshiba will create the Win98 drivers for this laptop.

  What you can do is to check the net for different drivers that might be compatible with devices portable single... good luck

• Need drivers for my Dynabook CX1/214LE

  Hallo all.
  I have Dynabook CX1/214LE model Portege 4130 series.
  I need drivers for the new facility. Where is possible to download? On the Web from Toshiba site are not.
  Thank you

  Hello

  You must understand that there is not some sort of Toshiba global support and download page. That is why if your laptop is designed for the Japanese market so only is this laptop backed on to the Japan Toshiba support page.

  This laptop model is not available in Europe, and you won't find drivers on European support page. So either try to use drivers for some similar Portege model or directly check the download page for equipment manufacturers.