Need the drivers NVidia for Qosmio G20 because of problem of Second Life

Similar Questions

• Someone has tested the native nVidia for Qosmio X 870 - F31X drivers

  Hello

  I have a Toshiba laptop for the past 5 years and are about to buy the QOSMIO X 870 - F31X.

  My only concern is the update of the display driver. For a mobile game, it's a huge concern. I am aware of the driver on the U.S. site:

  [Display driver X 870-BT2G23 Qosmio | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=3380646& rpn = PSPLXU & modelFilter = X 870-BT2G23 & SelCategorie = 2756709 & selFamily = 804517]

  Still would like to know if anyone has tested the native nvidia drivers?

  This is certainly the decisive factor :(

  Thank you
  Renclav

  Native nVidia driver might be installed I have not test this, but for according to other threads in forum Qosmio X, this shouldn't be a big problem

• Need new GPU, cooling for Qosmio G20 module

  Anyone know where I can get a new fan for GeForceGo 6600 graphics on my qosmio G20?

  I don't know if this GPU cooling module is m.
  However, all compatible parts can be ordered from the authorized service partner.
  The technician may be able to provide more details on this part.
  As I m not wrong not the FSA can order these parts directly from Toshiba.

  Best regards

• Need adapter antenna TV for Qosmio G20

  Hi - I am in desperate need of a lead/adapter that will allow me to connect a regular TV antenna wire to my Qosmio G20. Can anyone advise where they can be purchased from - I looked on the Options website - and maybe lack of what is obvious - but I can't find one.

  Any advise appreciated. Thank you.

  AFAIK almost all port a TV SCART at the rear and adequate cable SCART is comes with Qosmio G20.

  Please also check this http://www.maplin.co.uk/Module.aspx?ModuleNo=33050

• How to update the drivers NVIDIA for Pavilion dv6755el.

  Hi, I know it please tell how to update the video card driver, in which rirectory GB installed, because I stood Blue Shield and microsoft has identified that the video card driver is not updated, I followed the procedure of upgrading HP but found no drivers. ? I downloaded directly from NVIDIA updated for my card, but I can't find where the original, but the installer says C:\Nvidia... Thank you

  I don't think it's asking you where to install, it can ask for a place to decompress the files, so just say ok the location by default, he suggests. If the installation does not continue after developing files, switch to that folder where it expanded their and find the Setup, the exe file and run it.

  .

• Drivers Linux for Qosmio G20

  Hello.. .i understand that everything is not supported for linux but there at - it plans by toshiba to develop appropriate drivers for linux?

  one

  Hello

  At present, there is no information on this subject and all laptops are supported just for the Windows XP operating system. The problem is that the G20 use RAID technology and in this case, it is more difficult to run Linux OS.

  Sorry, but I think that it will not happen soon.

  Good bye

• Need graphics drivers nvidia for Satellite P100-286

  Hello, I hope I'm in the right place as TOSHIBA is bigger than I thought. I'm trying to update my NVIDIA driver on my 286 P100, I went to the NVIDIA site and they redirect me to Toshiba USA and I could not find them. So I came to Toshiba UK and it's more complicated that I first imagined. Could someone please give me maybe a url that I can go to directly. Thank you very much for your time,
  Geoff

  Hello Michael

  I produced future Satellite P200 and last game I played was Call of Duty 4. What is also a game or already old modern?

  In any case, I can understand why you write this but on the other side your sound quite illogical comment to me. You know very well that almost every day we have new and modern games on the market, and these games have more and higher hardware requirements. With short words: for modern games, you need modern equipment.
  Why you compare with powerful desktop computers with extremely powerful with designed cooling systems, special one side graphics cards, graphics processor integrated notebook? Can Hey Buddy, you really expect the same performance?

  Where is the limit for you? Perhaps at this moment when the graphics card died? And you can cry and say: Toshiba didn't do anything to protect my equipment.
  Yes you write about the mobile game but this portable game cannot offer more than a reasonable level of performance.

  Sorry Michael, but I think your comment is absolutely unjustified and certainly hypercritical.

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.