need to get the guest operating system to adapt to the screen of the monitor...

Similar Questions

• More small footprint of guest operating system that can run in nested ESXi5

  Hi friends,

  I use VMWARE workstation 8 drive ESXi5 and vCenter. Now I want to test the HA, can someone please suggest the guest operating system, I only need networking in this guest operating system, so I can test the AP. As it is nested ESXi5, all other Windows OS has taken a lot of time to install and operate.

  The m0n0wall firewall application uses about 16 MB for storage and 64 MB - http://m0n0.ch/wall/downloads.php.  You might find some that needs less than that.

• problems to receive a guest operating system

  Hello

  I have to be able to do a query on Windows 2003 virtual machines that use the BusLogic SCSI card.  However, I am having a problem just get the operating system of each guest.  Many guests (seems to be about 800 out of our 1200 guests) return a null value (I'd say less than 10 of them are turned off).  I tried with both the 1.0 version of the VI and also just upgraded to 1.5 to check that it has not been fixed.  Here again, I'm not 100% sure it's a problem with the Toolbox.  Anyway, that's what I've tried so far.

  First of all, I found a good virtual machine (vm1) and a bad VM (vm2).  I created two variables:

  $vm1 = Get-VM vm1name
  $vm2 = Get-VM vm2name
  

  Then I tried simply to list the property Guest.OSFullName of each virtual machine:

  $vm1.Guest.OSFullName <-- returned Microsoft Windows Server 2003, Standard Edition (32-bit)
  $vm2.Guest.OSFullName <-- returned nothing
  

  Other "guest" properties seem well as evidenced by the following output:

  "$vm2.Guest" returns:
  
  State          IPAddress            OSFullName
  -----          ---------            ----------
  Running        {1.2.3.4}
  

  The only other thing that I noticed (and I'm going to file a SR for the same problem when I am back in the office on Wednesday) is that if you view all virtual machines in the VI Client and guest OS type, there are a lot of things that just say 'unknown '.  I've noticed this on 2.0/3.0 and now I'm under U3 2.5 and 3.5 U3 everywhere.  If you simply to change the settings of the virtual machine and click OK (without making any changes to anything) it will fix the guest operating system 'unknown '.  If you click on the 'Options' of the section of edit VM settings tab, it shows the correct guest OS it.  However, after click on this tab by clicking OK causes an error message something to not be able to change this setting in the current state (power on).  Nevertheless, at the beginning I thought all the unknowns explained my missing Microsoft VMs, but there are more than 100 virtual machines or so that are listed as unknown, so I am always short way.

  Finally, I searched this topic on the forums and learned about the Get-VMGuest cmdlet, which I managed for ever noticed before.  So, I tried the following:

  $vm2 | Get-VMGuest
  

  And got the same results as above (shows its power status and the IP address, but any type of OS).  VM1 works very well with the above code.

  Does anyone have ideas on this?  I even buried down and use Get-View and pulls the. Property Guest.GuestFullName out and it is also empty.

  Hi Allen,.

  I've never known tools that are so far out of date that you do not get a guest operating system, but I wouldn't be surprised it. You should always be able to get out the Tools version number in any case (even if not Get-VMGuest in this version).

  There is a significant difference between these people that the prompt that signals the VMware Tools is the real guest OS. The comments you get Get - VM or Config.GuestFullName is the value that is set when creating the virtual machine. This value cannot be identical to the real host. For example, I could create a virtual machine, select Windows 2003, and then install Redhat on it. In this case, Get - VM would net the VM as a machine virtual Windows while the tools would (correctly) reported as Redhat.

  In general, use tools when you can. If you don't get given tools, it can be wrong.

• Cannot run the program in the guest operating system

  Hello

  I'm trying to run a program file (an .exe) in a virtual machine via vCO using executeCommandInGuest.

  The thing is that the .exe file starts a user interface to display the status (do not ask for entry) when it runs locally. When I call the script of vCO, I get the following error:

  Error while executing command (can not run the command: InternalError: a general error occurred: a program could not run on the guest operating system (name of the dynamic Script Module: executeCommandInGuest #40) (name of the dynamic Script Module: executeCommandInGuest #46))

  
  

  If I try to call a .bat file in the VM that starts the program of the WF works but the .exe file is never started in the virtual machine.

  If I specify to run another .exe for example ping.exe only complete control of WF and if I specify a .bat file that call ping.exe he also successfully complete.

  There is no silent mode for the .exe I need performed.
  

  Any help would be appreciated.
  

  Thank you

  Magnus

  The problem was caused by the user access control. Put forever does not resolve the problem, disable it through the user interface, restart the virtual machine, and then continue with my script.

• I have a license key for windows 7 Home premium 64-bit. I recently had to replace the motherboard. How can I get a replacement operating system?

  I have a license key for windows 7 home premium 64-bit on a renovated Gateway PC I bought.

  I recently had to replace the motherboard and now have to reinstall the operating system.
  How can I get a replacement operating system? All I see is where I have to pay to download another.
  Thank you

  Download the Windows 7 ISO Image
  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  You may need to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Avoid checking "the guest operating system has locked the door of CD-ROM. disconnect anyway and replace the lock?

  Using PowerCLI, I'm trying to create a script that logs off the CD player and affects the client machine and Passthrough IDE using the command:

  Get-cddrive - VM SRVVM616 - netscan02.kb.se | game-cddrive - nomedia - confirm: $false

  * (where SRVVM616 - netscan02.kb.se is the VM name in this case)

  But I can't get rid of an audit question that arises in vSphere Client:

  'The guest operating system has locked the door of CD-ROM...

  Unplug anyway and replace the lock? »

  The script hangs until I answered the question, and who does the idea of a useless script?

  How can I avoid this issue?

  Maybe the method I described in answer to the question! could help.

• How to install the guest operating system (winndows)

  Hello

  Please send me the start-up stage guest operating system (windows Server 2008) of SAN.

  Concerning

  Mathon.

  It will detect as raw disk and then you need create the partition on the raw disk.

• T of what guest operating systems will start the VMware Support for EFI?

  Is there a list of support guest OS for the EFI firmware?  Mianly supported by VMware - do not try, fail, call support technique etc etc.   My experiences on the TP forums, I guess that there is not.  Some OS (such as Windows Server) come with a screen to choose BIOS/EFI firmware.  If not, you need to go to setting > Hard Drive OPtions-> advanced _ > boot using EFI.  In particular there at - it versions of Linux that you give you option of BIOS/EFI firmware before the confutation of VM is complete, so the hard drive then be custom.

  We will officially support the EFI firmware for any guest operating system to which all the following conditions are met:

  • We list this guest operating system, supported in the VMware Compatibility Guide for operating systems and your virtualization product.
  • The guest operating system supports EFI in the operating system installation media.
  • Support the guest OS EFI has no catastrophic flaws (for example Fedora 12 x 64, FreeBSD 11, Centos 6.0 through all the 6.2 have catastrophic flaws).

  New computer virtual assistant of 11 workstation has only the option of EFI firmware for Windows clients.  Special mention, do not yet support us Easy Install for non EFI customers in 11 workstations.  For all other customer support EFI OSes, you can do a manual installation after choosing the EFI firmware in the virtual machine settings > Options > Advanced > Boot with EFI instead of the BIOS.

  I don't understand your concern about the personalization of the hard drive... Could you elaborate?

  See you soon,.

  --

  Darius

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• Sharing of content between the guest operating system

  Hello

  Y at - it a simple way to share content between operating systems.

  We have invited several BONES that make similar task. Run us simultaneously with the slightly different variant, but basically, most of the files that are needed in each guest operating system are the same.

  What I want to achieve is to build a repository of centralized files accessible across operating systems. I'm running Win7 and WinXP Win2008 OSes on ESXi 5 comments.

  I found this thread, but it is too old.

  http://communities.VMware.com/message/630923#630923

  I'm hoping there have been changes since that thread has been discussed.

  Thank you

  Well, I can't tell you much about the user experience expected without knowing the network load. However, if install you the file server as an another VM on the same host, you will have at least a 1GBit/s connection between the virtual machines.

  André

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André

• How should be written the script for the use of the maximum memory of the guest operating system ever?

  How should be written the script for the use of the maximum memory of the guest operating system ever?

  Please teach the name of the object and the type and order, etc.

  You should be able to do it with the cmdlet Get-Stat .

  Something like that

  Get-Stat -Entity (Get-VM $vmName) -Stat mem.usage.maximum -Start (Get-Date).AddDays(-7) | Measure-Object -Property value -Maximum | Select Maximum
  

  This will return the maximum percentage in the last 7 days for the guests, whose name is stored in the variable $vmName.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Antivirus on the guest operating system

  Hello:

  When the host operating system has an antivirus and is updated in the calendar, the guest operating system needs a separately installed antivirus? Because the internet connection through the host operating system, won't Take Care of any potential threat antivirus agenda

  ... no antivirus (host) take care of any potential threat?

  Not necessarily.  For example, if the virtual machine is set to bridged networking, then the virtual machine appears like any other physical machine on the network and is NOT protected by AV. host if you set NAT network, the host behaves as a personal router (e.g.: Linksys box.)  Always install you an AV on your computer, even if you have a hardware router.  So even for your virtual machine.

  Others will probably give many examples more and better than I, but as a general rule, treat your virtual machine just like any other machine.  If you have installed an AV on a physical machine with this OS, you must install an AV when the OS is virtual.

• Trouble installing the guest operating system

  All,

  Having trouble installing the guest operating system - Windows XP SP3. I followed the directions of the booklet that I try to boot from a local image and a CD. I can't able to get into the setup of the BIOS to start the virtual machine when you press F8. I am currently on a decentralized network that starts his BONES from a PXE server. When I turn on my VM, its shows the boot process than my actual desktop. I tried many configurations, but still problems. All instight would be useful. Thank you.

  Welcome to the forums!

  To enter the VMWare guest BIOS press F2, no F8.

  You can also add 'bios. BootDelay = 10000 "in the prompt .vmx file. This gives you more time to press F2.

  The virtual guest has a CD-ROM attached to it?

  Is it "connect to turn on?

  Is it connected to the physical machine (where the OS CD is inserted)?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• VMPlayer newbie - switch back and forth between the host and the guest operating system

  I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

  Hello, welcome to the forum

  Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

  According to this link , it's the same thing in Linux host too.

  >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

  > pref.hotkey.shift = "true".

  > pref.hotkey.control = "true".

  > pref.hotkey.alt = "true".

  After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

  I hope it helps a bit.

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-