Need to have different BAM view column name to the dataobject fields

Similar Questions

• new to 4.02, no grid or column names in the query results

  It is a bit strange, I have SQL Developer 4.02 just installed, and I don't see grid or column names in the query results.  Don't see anything useful in tools > Preferences, what don't get me?

  The worksheet gives you a couple of different ways to run a query...

  1. instruction execute sheet icon toolbar (large green arrow, or Ctrl + Enter).

  This produces a results tab of the query with the data displayed in a grid.

  2. worksheet icon toolbar Execute the Script (the small tip of the green arrow on lined paper, or F5).

  This produces a tab out of the Script with the data displayed on the printer.

  If execution of the statement to Execute the Script, using some SQL * most orders will remove the column headers:

  1. set the position

  2. set the pagesize 0 (or 1 or 2).

  Pagesize and linesize default is - 1.  By default, the spreadsheet is free for formatting output script as he wishes.  If you have not changed these settings in the spreadsheet, then see if you point to a startup script in Tools > Preferences > Database > name of the connection startup script file

  Kind regards

  Gary

  SQL DeveloperTeam

• How to make reference to a column name in the form report

  Hello
  How can I make reference to a column name in the form report. My problem is that "I have a form report that I have the column name when using click on the column name, it must get to the next page with the corresponding values of the column".
  
  Here, I realized that when I click on the name of the column (in page 1) it brings me to the next page (page 2). but in the next page (P2) I want to display (display only) the corresponding values of the column (page 1) selected, but the values are not editable and shouldn't be in the text box must be in display area.
  
  So, how can I write a SQL to display single source field. That is to say, how can I consult report form (page 1) in name column.

  Hello

  If you use the link in the column when you click on the need of the column value, you need to navigate to the next page and all the data accordingly select value here.

  Modify the report form and see the top of the page and click on report attribute.

  So now you have the attributes of the columns is to say what are the columns are available in the reports form.

  Click on change column what you need Ie the column when you click on its passage to the next page this column, for example, as mentioned in the previous post "Empname".

  Check the link column and give perspective of values according to your need and click on apply chages.

  Thank you & best regards
  Srikkanth.M

• Display the name of the tag as the column name and the value in the tag as a row of data from the input string.

  Hi Forum members,

  I am looking for a query display the name of the tag as the column name and the value in the tag as a row of data.

  I have to print the values within the tag to a file by choosing the value of the flags. the sequence of the tags will vary each time, as the tag name will change dynamically.

  So here is the example of input data and the expected output. The string in the text column must be separated as the column names and values.

  Input data
  Select 1 as seqno,' < > 0210A 50 4f < / 4f > < 5f20 > TEST CARD 16 < / 5f20 > < 5f2a > < / 5f2a > < 82 > 1 c 00 < / 82 > ' double text

  
  Output:

  Seqno 4f 5f20 5f2a 82
  0210A 50 16 1 00 TEST CARD 1

  Please help me by providing your entries on this.

  We use the version of Oracle 11.2.

  Note: This is not the XML string

  Thank you

  Shree

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  )

  Select d.seqno, x.*

  d the data,

  XMLTable ('/ root')

  by the way xmltransform (xmltype ('': replace (replace (text,'<><>'),)))

  XmlType (q'~http://www.w3.org/1999/XSL/Transform "version ="1.0"> ")

                                                   

                                                     

                                                       

                                                     

                                                   

                                                   

                                                     

                                                       

                                                     

                                                   

  ~'

  )

  )

  path of columns '4f' varchar2 (10) "tag4f."

  path of "5f20' varchar2 (30)"tag5f20. "

  path of '5f2a' varchar2 (10) "tag5f2a."

  path of varchar2 (10) "82" "tag82.

  ) x

  
  

  SEQNO	4f	5f20	5f2a	82
  1	0210A 50	16 TEST CARD	-	1 00
  2	0210A 50	16 TEST CARD	-	1 00
  3	0210A 50	16 TEST CARD	-	1 00
  4	0210A 50	16 TEST CARD	-	1 00

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  ),

  Chopper (seqno, Key, value, String) as

  (select seqno,

  regexp_substr (text,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (Text,'>(.*?))

  regexp_substr (text,'<.+?>. *? ) (.*) $', 1, 1, null, 1). » <>'

  from the data

  Union of all the

  Select seqno,

  regexp_substr (String,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (String,'>(.*?))

  regexp_substr (String,'<.+?>. *? ) (.*) $', 1, 1, null, 1)

  Chopper

  where regexp_substr (string,'<(.*?)>', 1, 1, null, 1) is not null

  )

  Select '4f', seqno, '5f2a', '82', '5f20.

  of (seqno, lower (key) select key, value)

  Chopper

  )

  Pivot (max (value) for key in ('4f' as '4f', '5f20' as '5f20', '5f2a' as '5f2a', "82" as "82"))

  Concerning

  Etbin
  

• Display the column name of the column more recently updated

  I wonder if it is possible to display the name of the column in the column most recently updated in a table.

  Example:

  Emp table

  Name

  Height

  Weight

  Age

  Update_Date

  Update_Column

  Original record (03/20/14)

  Name size weight Age Update_date Update_Column

  John                                                 03/20/14          Name

  Then someone comes and update the height on 22/03/14:

  Name size weight Age Update_date Update_Column

  John 5'9 03/22/14 height

  And the Update_date and the Update_column would change again if someone came and put a value for the age. And so on.

  Is this possible?

  Also, if the above is possible, would it be possible to display the name of extreme right column if a user updated several columns at the same time?

  Example:

  User updates the sub-folder:

  Name size weight Age Update_date Update_Column

  John 5'9 03/22/14 height

  And adds weight and age at the same time on 24-03-14:

  Name size weight Age Update_date Update_Column

  John 5'9 150 31 03/24 / 14

  The Update_Column would display age because it is the furthest to the right. (Think by reading from left to right, the column that has been updated if the extreme right)

  So to sum things, I need to be able to display Updated_date (which will be the date of the day when the record is the last updated) and Updated_Col (which is the column name of the column was last updated, and if multiple columns are updated then display that value has been updated last in)

  I hope that the examples help to clarify things.

  Thank you

  Steven

  I think I found a solution.

  delimiter //
create table a (
  id int (10) unsigned auto_increment,
  a int(10),
  b int(10),
  update_date datetime NULL,
  update_column varchar(16) NULL,
  primary key (id)
)//

  create trigger bu_a before update on a for each row begin
  set NEW.update_date = NOW();
  set NEW.update_column = NULL;
  -- you need to start with the rightmost column if you want
  -- that matched with the highest priority
  if OLD.b != NEW.b then
   set NEW.update_column = "b";
  elseif OLD.a != NEW.a then
   set NEW.update_column = "a";
  end if;
end //

  TEST

  insert into a (id,a,b) values (1,1,1), (2,1,1), (3,1,1), (4,1,1)[
update a set b = 2 where id = 2;
update a set a = 2 where id = 3;
update a set a = 2 where id = 4;
update a set b = 2 where id = 4;
select * from a;

  DISPLAY

  ID  A   B   UPDATE_DATE                    UPDATE_COLUMN
1   1   1   (null)                          (null)
2   1   2   March, 24 2014 23:22:33+0000      b
3   2   1   March, 24 2014 23:22:33+0000      a
4   2   2   March, 24 2014 23:22:33+0000      b

• How to make reference to a column name in the domain constraint

  When specify us a constraint check (for SQL Server) in a field, we need to enter an expression in the syntax, for example
  
  Len (Phone) > 7
  
  Later, the Modeler will exactly this expression in the SQL code. But it would be wrong as a constraint to refer to a column name in the table (which would not be 'phone').
  So, how to make the data name Modeler to a real column in the constraint domain?

  Hello

  Use the % COLUMN as a placeholder column name - len (%COLUMN%) > 7

  Philippe

• Anyway, to remove the column names in the result of the query of SQLPLUS

  Hello
  
  I am using sqlplus to run a script that returns results with the column names.
  
  Anyway is to omit the names of columns in the result of the sqlplus query?
  
  I would like to have only results with their column names in the output.
  
  Thanks in advance!

  Hello

  Maybe your LINES (IZE) is not defined?

  SCOTT>set lines 130
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                                                          MODULE
  -------- ---------------------------------------------------------------- ------------------------------------------------
  INACTIVE PFAE3\VPC4894-03                                                 TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03                                                 SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  As an alternative to the linesize parameter, you can format the columns:

  SCOTT>set lines 80
  SCOTT>col status for a8
  SCOTT>col machine for a30
  SCOTT>col module for a30
  SCOTT>select status, machine, module
    2    from v$session
    3   where upper(username) = 'SCOTT';
  
  STATUS   MACHINE                        MODULE
  -------- ------------------------------ ------------------------------
  INACTIVE PFAE3\VPC4894-03               TOAD 9.7.2.5
  ACTIVE   PFAE3\VPC4894-03               SQL*Plus
  
  2 rows selected.
  
  SCOTT>
  

  Concerning
  Peter

• If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I buy a person's computer and windows is registered in their name can I have register it in my name with the OEM for windows

  If I read your question correctly, this article should solve your problem for you:

  "How to change name and company information after you install Windows XP"
    <>http://support.Microsoft.com/kb/310441 >

  HTH,
  JW

• include the column name in the results

  How can I include my column names in the first line of my results?

  Do not press the "Execute" button negative
  Press the button 'Run as script'

• How to apply different fonts to text (words) in the same field

  Please help, how to apply different fonts to text (words) in the same field. I want to select text and apply the font, size and color on the selected text in the field, this code below, the setFont method changes all the text in a field (message) of a select statement to the police. Help, please

          message = new AutoTextEditField("","",maxNumChars,editableStyle)
          {
              protected void layout(int width, int height)
              {
                  super.layout(width, height);
                  this.setExtent(550, 250);
              }
          };
          message.setBorder(border);
          message.setMargin(xyEdgeForMargin);
          message.setPadding(xyEdgeForPadding);
          message.setFont(_menuFont);
  

  Just write your edit as field

  SerializableAttribute public class RichEditField extends BasicEditFields

  {

  int [] offsets = null;

  Are police [] = null;

  String text = null;

  RichEditField (label As String, String text, int [] offsets, make police [])

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  Offsets = this.offsets;

  This.font = do;

  Add validation for offsets and text here

  }

  RichEditField (label As String, String text)

  {

  Super (label, text);

  This.Text = Text;

  This.Label = Label;

  This.offsets = {0};

  This.font = {g.getDefaultFont ()};

  Add validation for offsets and text here

  }

  / * Here is a method to add customization of fonts as

  setFont (offset, length);

  setFont (offset);

  public void paint (Graphics g)

  {

  g, Clear ();

  for (int i = 0; i)<>

  {

  calculate it according to x, y using offset

  int length = 0;

  g.setFont (do [i]);

  If (i<>

  length = offset [i + 1] - offset [i];

  on the other

  Length = Text.length () - offset [i];

  g.drawText (text.substring (0, length), x, y);

  Super.Paint (g);

  }

  }

  This method is not compiled may have errors and may have many features according to your needs.

• I place "Name of the signatory" field, but it is not visible to him when he opens the document (the participant is chosen correctly). Could you advice settings please?

  I place "Name of the signatory" field, but it is not visible to him when he opens the document (the participant is chosen correctly). Could you advice settings please?

  The "name of the signatory" field is not an active field for the signatory to interact with, so that they see a box in the document for them to type. It is automatically filled in with the information that is entered at the time of the Signature field.

• Rename the column name of the view

  Suppose I have an employee of the table with the column name. Now, I want to make a view of the employee to the table with the name of the First_name and Last_name column. Is this possible?

  You can also use aliases in the view definition:

  CREATE VIEW employee_view (
    first_name,
    last_name
  ) AS
    SELECT first,
           last
    FROM   employee;
  

  However, you can rename a column in a view. You would have to DROP and CREATE or to CREATE or REPLACE.

  Concerning
  Peter

• use a (selection list) element as the column name in the select?

  I have a popup LOV key based on a select (dynamic list of values)
  I want to display and return - select columns in the select statement to be determined by another list.
  
  I tried:
  
  Select distinct: P133_COLUMN d: P133_COLUMN r
  FROM MyTable
  
  but then I don't you the value of: P133_COLUMN... so if: P133_COLUMN is 'EMPNO' LOV popup displays the text "EMPNO" and referred the text 'EMPNO', not the empno column values...
  
  If I change
  
  Select distinct P133_COLUMN d & P133_COLUMN r
  FROM MyTable
  
  I get the standard
  "LOV query is not valid, a display and a return value is needed, the column names must be different. If your query contains a query online, the first CLAUSE in the SQL statement must not belong to the query online. »
  
  Anyone?
  
  Also, I was wondering if it is possible to set the textfield object in the item popup LOV to accept the input text directly as well as the selected value, but the first part of the question is the important part.
  
  Concerning
  
  Andreas

  Hello Andy,

  Change your LOV to something like this:
  'select' return. : P133_COLUMN |' d, ' | : P133_COLUMN | "as r from myTable";

  Greetings,
  Roel

  http://roelhartman.blogspot.com/

• 404 error when the lowest selection (column name) for the metadata 11 g dictionary

  
  Hi all

  I get a 404 error when I select a column name and click the link for dictionary of metadata. I get the 404 because obiee is allowing more 179 characters for the web link. You do not get a 404 error if you click on one of the shorter column names.

  When you select the number of offices with commands and then click the metadata dictionary button you get the error 404 below and the web address is truncated causing the 404

  This is the product link

  http / / self/analyticsRes/SampleAppLite_BI0024/SubjectArea/PRCAT_Sample_Sales_Lite80cb6a2e /.

  PRT_Calculated_Facts80cb6aa9/PRC_N_of_Offices_with_Or80cb6cfb.x

  If you type the ml at the end, you can see the Web page you want. Also if you click on the area in question and then click the dictionary of metadata and access the column from here the link works.

  
  

  

  We receive this error in our Dictionary of metadata generated, but I can also reproduce the problem with the sample app, we have placed the dictionary in the folder anlyticsRes.

  I just wanted to check to see if someone else has this problem.

  Thanks in advance!

  S. Clark

  I opened a SR and a bug has already been reported, and the solution is in the latest patch.

  Solution

  The fix for the Bug 17449036

  is included in the bundle 20124371 Patch (patch bundle 11.1.1.7.150120). See this note for more information:

  Note 1488475.1: OBIEE 11 g: required and recommended patches and Patch Sets

  There is also a one-off Patch 17449036 on top of previous patch bundle for different platforms.
  It is advisable to be in the latest patch bundle. In this case, you prefer to apply exceptional measures, you can do but
  It is not for all platforms and all the patches together.

• How to propagate the column names in the file engineering reverse to db table?

  Hello
  
  I have successfully reverse engineered column about 100 names on the first line of a file flat .cvs in a data store of file (technology) using ODI 11.1.1.
  
  Now I would like to imitate what I used to do with OWB: simply propagate these column names from my data file store flat source to my table (in the meantime) target store empty db.
  
  How can I do?
  
  ---
  
  I tried as much as one can intuitively: drag the columns in my store of source (depending on model) to my target db table that is open in the main view, but ODI Studio just opens as Inspector tabs for columns.
  
  In my loading interface, if I choose 'Temporary target', it behaves exactly as I want (rigth click .cvs file to map the tab 'Add a column to the target'), even the chains are transformed into Varchar2...
  ... only, it will not implement target as a permanent store if I uncheck 'Temporary' and I can't select and copy the entire grid to export elsewhere.
  
  Generating the DDL to create a target table db and reverse would still be acceptable to me but generating the DDL for a store file does not make sense to ODI.
  
  Any help?
  
  Thank you

  2 quick ways to do:

  1.) copies the file according to the data store and then move it to the Oracle based model.
  2.) use CFD (designer of common Format) and create a diagram in your model of Oracle based. Drag and drop the file based model in there.