Need TOSHIBA Recovery Wizard, but have simply on TOSHIBA HDD Recovery Tool

Similar Questions

• Need new hard drive, but have not the disks in Windows 7 OS

  Recently, I had some problems with my PC and was able to restore the factory settings.  Now it seems that my hard drive is bad and needs to be replaced.  I have a HP G71-449WM model, produces WA606UA.

  Will it also find Windows 7 OS disks somewhere?  I didn't need one when I did the restore to factory.

  It's the hard drive, which I intend to purchase:

  http://www.Amazon.com/Toshiba-5400rpm-replacement-G71-449WM-WA606UA/DP/B00JRLAYMW/ref=sr_1_2?s=elect...

  Hello

  First of all, the HARD drive in your link is fine, even if you can consider a slightly faster (7200 RPM) - for example, either of the drives on the following links would be very well for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 64 of your & Maintenance Guide.

  ***************************************************

  Regarding the reinstallation of the operating system on the new drive, there are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• Need to reinstall XP but have lost my product key

  I have a windows computer that is so old that, until recently I only ran from 98SE to this topic.  A few years ago, I bought XP - just before XP exploded the market, actually.  When I installed it, I discovered that the only programs I've used with no matter what regularity still existed, a couple who worked in the BACK (!) and the other who would not run in XP.  So I went back to 98SE.

  Recently, I bought a Macbook Pro.  I have an emulator on BACK, so I run now these two programs on the Macbook.  And I have a Mac program, which replaces the one that did not run in XP.  But (1) I need the Macbook to the old Windows of the network computer, and it doesn't seem to work with 98SE; people on various forums suggest that it will be easier with XP.  (2) I downloaded a new program that does not run under 98SE, but works on XP, Vista and 7.  (My old windows computer is too low to run whatever happened to XP.  Even XP stem it.)
  So now I want to reinstall XP.  I was barely in the process when the message came to enter my product key.  The problem is that shortly after the first installation, I put the disc in a box, without getting into account that the product key is on the original cardboard jacket (or whatever XP came in--I don't even know).  I've looked everywhere and can't find it, and apparently I copy down the key to product no more.
  Y at - it * all * way to reinstall?  Or get my product key for Microsoft (I register XP when I installed it first)?  I can't reach tech support tonight, I get an error message.

  Hi DudleyBrooks,

  You will need to contact Microsoft customer service for assistance.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Need to reinstall XP but have no CD

  I have an old computer with XP on it I want to make a donation to a school.  I do not have a XP CD and want to erase the disc to clean before giving it away.  Other ways to remove any personal information?

  Hello

  You can refer to the following steps:

  1. Set the Bios to boot from the CD-ROM as first boot device.
  2. Place the CD in the CD-ROM and the re-Boot drive.
  3. Listen for the prompt "Press any key to boot from the CD" press as gone soon (ignore when the message appears on all restart) (you get this prompt if there is a XP/OS installed on the HARD disk)
  4. Installation of Windows (file charges)
  5. To install XP now press "enter".
  6. Press F8 to license.
  7. To continue the installation, a new copy of windows without repairing, press "ESC".
  8. For a new or unpartitioned drive, press 'c '.
  9. For a player who has partitions, operating system or any data on this subject, you must press "D" to delete the partition and start with a clean drive.
  10. Press "enter".
  11. You will be prompted again, tap on ' L "(vous allez faire ceci pour chaque partition), you are now ready to partition and format." "
  12. Press 'C '.
  13. To create a new partition, enter a size below and press 'Enter' (Note = You can create several score here or press 'Enter' to use the entire disk.)
  14. To set up windows on the selected partition, press "enter".
  15. Select the NTFS format with quick option, (must be the selection at the top of the page)
  16. Tap on "" enter ".
  17. Wait for form to fill out.
  18. Computer will start to copy the files in the installation files (this may take several minutes)
  19. Computer restarts, do not press any key to boot from the CD-ROM when you are prompted.
  20. Follow the on-screen instructions to complete the windows loading.

• Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  Need to disable CGI, I have two-factor authentication, but I don't have the phone number or device with me. What can I do?

  For Apple ID - Apple Support two-factor authentication

  If I can not connect, how I again to access my account?

  If you can't sign in, reset your password, or receive verification codes, you can account recovery application to restore access to your account. Account recovery is an automatic process designed to help you back into your account as soon as possible while denying access to anyone who might be impersonating you. It may take a few days - or more - depending on the specific account information, you provide to verify your identity.

  It will be your option. If you try to find an iPhone with locking Activation that you don't remember the password, you can remove the account from the iPhone with the help of Apple's Support with the receipt of the initial purchase of the iPhone as a way to prove that you are the real owner of this iPhone.

• Do not have "Toshiba HDD Recovery" on Satellite U300-151 with Vista

  I have problem with Vista - it became too slow so I want to get back to factory settings.

  I went through the process described in [http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm] and then, instead of "Toshiba HDD recovery" as a last option-, I have 'Restore the full Windows operating system' which is the last one after 'comand prompt. When I click on that I get another box with warning by saying "when you reinstall windows OS reformats the hard drive and all data will be lost" and "If the preinstalled files are damaged you can use the product recovery disc (which I don't have)" and there are no other or any button except OK which I click and it just brings back me to the list "System Recovery Option"...

  I have Toshiba recovery disc creator no - it was not pre-installed when I bought computer - even if I had all the other software from toshiba.

  And I know that I can buy the recovery disk, but I don't think that pay 30 dollars for something that I should have had with the computer: and my computer is still under warranty.

  Delivered using the recovery media, you will be able to install Vista.
  Recovery image contains all of the drivers, tools and utilities, and after the installation of clean operating system, you should not install some additional software.

  Bye and good luck!

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall? __

  I need 2 reinstall windows vista, but have had is no longer my installation cd, cani always reinstall?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

  I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

  For your photos, try importing them to your computer and their synchronization then back to the SE.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

  For your texts, they moved with the backup restore?

• TOSHIBA HDD/SSD Alert - do I need if I have my laptop on a desk?

  Hello all, I guess my question is not on the HARD drive or the hardware itself, its subject the load or the process CPU usage alert hdd in my laptop. Fact it gives a heavy load for my memory?
  Someone at - he noticed your laptop to be a bit slower when this option is enabled?
  I know it's protection for my HARD drive, I understand that was a time when my laptop falls or is hit, the hard disk will fail and my HDD is damaged.
  But how useful this app if I have my laptop on a desk all the time without danger?

  Do you advise me to turn it off?

  In general the TOSHIBA HDD/SSD Alert function must monitor the operating status of HARD drive and run the backup of the system. It is very useful, but certainly not so important, tool that must run all the time. It runs in the background, does not use the resources so and in fact there is no reason to stop it, only if you want.

  That recommend you?
  In my opinion you should let it run. I have the Satellite P500 and it works all the time. I t n t n stop and I noticed a few performance bad/slow more laptop because of this.

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• I have win xp pro installed on my device need to be formatted, but I forgot the key to product, sort of take my product key. ?

  Failed product key

  I have win xp pro installed on my device need to be formatted, but I forgot the key to product, sort of take my product key. ?

  I prefer Belarc Advisor - www.belarc.com - because it gives a lot of other information, which is useful in preparation to a reformat/reinstall.

• I need a recovery for a 2005 disk toshiba satellite windows xp media edition

  MY SON HAS A 2005 TOSHIBA SATELLITE. WE NEED A RECOVERY DISK FOR WINDOWS XP MEDIA EDITIONS. HOW IS THAT I COULD DO TO GET THIS DISC.

  Hello

  You will need to contact the manufacturer of the system to get the recovery disk.
  http://forums.Toshiba.com/
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=product%20Support

• need changes of area but do not have DNS services, help

  the comp. 2 needs only one domain, but do not have DNS service falloing SIP address don't now how to get it.

  Thanks for visiting the site of the community of Microsoft Windows. The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/categories

• How can I re-install rtl120.bpl I've read the article on Tune Up Utilities but it's not on my computer, I just need to reinstall it, but all downloads have so far failed.

  How can I re-install rtl120.bpl I've read the article on Tune Up Utilities but it's not on my computer, I just need to reinstall it, but all downloads have so far failed.

  Mike

  I don't think you want to re - install. From what I understand, it is a call to a process which, for which there is no process to the left, most likely a left of Tune UP utilities or similar.

  Run a Malwarebytes scan.

  Malwarebytes.

  http://www.Malwarebytes.org/

  When
  installation, make sure that you do not check the box to install the PRO trial
  Version...

  How to use Malwarebytes

  http://www.bleepingcomputer.com/virus-removal/how-to-use-Malwarebytes-anti-malware-tutorial

  Follow-up to the ADW cleaner...

  http://www.bleepingcomputer.com/download/adwcleaner/

  Do NOT click on the GREEN download button because it will bring only sadness. Use the BLUE

  button just below.