netio.sys blue screen

Similar Questions

• Satellite A100 - c:\windows\system32\drivers\sptd.sys blue screen error

  Hello

  Hoping someone can help with this.

  I have a Toshiba A100 with Windows XP Media Center Edition 2005.

  When I try to start my computer, I get a message saying that windows did not start successfully.
  I gives me the options of:
  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start Windows normally

  None of these options works. When I try Safe Mode, I get the following message:

  multi (0) disk (0) rdisk (0) partition\Windows\system32. .. .etc

  This message is repeated over and over again very fast, each time with a different .sys file at the end. Then I get this message:

  Press ESC to stop loading c:\windows\system32\drivers\sptd.sys...
  If I press ESC, I get the following blue screen:

  A problem has been detected and Windows has shut down to prevent damage to your computer.
  The problem seems to be caused by the following file: c:\windows\system32\drivers\sptd.sys
  The driver mistakenly marked a part of his image pagable instead of nonpagable.

  I don't know what except using the product recovery CD and fitness in shape, but I can't afford to lose some of the data on my computer, and this would erase everything.

  Has anyone had experience with this? Any advice?

  It would be much appreciated.

  Hello

  Seems the OS or the partition where the operating system has been installed, is corrupted.
  I don't know why this happened, but there are different reasons for this

  In any case, I think that you have no choice as to reinstall the OS using the recovery disk.

  You want to get access to the data on the HARD drive?
  Well, you could remove the laptop HARD drive and it could connect as an external USB device to another computer. Then, you should try to copy the data to another HARD disk.

  Who could help

• atikmpag.sys blue screen

  Hello there, so I got this blue screen atikmpag.sys appers in my laptop, I have if I could fix it with an OD format I tried that now, not only there has not been fixed but I cannot run in safe mode because windows have so install, no way to get rid of the blue screen? my laptop is G62-b90EV,
  Thanks in advance

  I fixed it before you post, I just went C:windows/drivers/atikmpag.sys and just delete the file, I reboot and the bsod appeared, then I download just last Ati graphics driver and everything is fine now.

  Anyway thanks for your help!

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Usbuhci.sys blue screen DRIVER_IRQL_NOT_LESS_OR_EQUAL d1

  It is a blue screen I know at this moment please look in to it thank you

  ==================================================
  Dump file: Mini041211 - 01.dmp
  Crash time: 12/04/2011 03:38:55
  Bug Check String: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  Bug check code: 0x000000d1
  Parameter 1: 0x00000008
  Parameter 2: 0x00000002
  Parameter 3: 0x00000000
  Parameter 4: 0x929d21c8
  Caused by the driver: usbuhci.sys
  Caused by the address: usbuhci.sys + 51c8
  File description: Miniport USB UHCI driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.0.6001.18000 (longhorn_rtm.080118 - 1840)
  Processor: 32-bit
  Computer name:
  Full path: C:\Windows\Minidump\Mini041211-01.dmp
  Number of processors: 2
  Main version: 15
  Minor Version: 6002
  ==================================================
  ==================================================
  File name: usbuhci.sys
  Stack address: usbuhci.sys + 51c8
  Address: 0x929cd000
  Address: 0x929d8000
  Size: 0x0000b000
  Time stamp: 0 x 47919050
  Time string: 2008-01-19 12:53:20 AM
  Product name: Microsoft® Windows® Operating System
  File description: Miniport USB UHCI driver
  File version: 6.0.6001.18000 (longhorn_rtm.080118 - 1840)
  Company: Microsoft Corporation
  Full path: C:\Windows\system32\drivers\usbuhci.sys
  ==================================================
  ==================================================
  File name: USBPORT. SYS
  Stack address: USBPORT. SYS + 40 c 9
  Address: 0x8d1be000
  Address: 0x8d1fc000
  Size: 0x0003e000
  Time stamp: 0x49e01fcf
  Channel time: 2009-04-10 23:42:55
  Product name: Microsoft® Windows® Operating System
  File description: driver Port USB 1.1 & 2.0
  File version: 6.0.6002.18005 (lh_sp2rtm.090410 - 1830)
  Company: Microsoft Corporation
  Full path: C:\Windows\system32\drivers\USBPORT. SYS
  ==================================================
  ==================================================
  File name: ntkrnlpa.exe
  Stack address: ntkrnlpa.exe + f5b8c
  Address: 0x8480c000
  Address: 0x84bc5000
  Size: 0x003b9000
  Time stamp: 0x4c0e557c
  Time string: 08/06/2010 09:36:44
  Product name: Microsoft® Windows® Operating System
  File description: NT kernel & system
  File version: 6.0.6002.18267 (vistasp2_gdr.100608 - 0458)
  Company: Microsoft Corporation
  Full path: C:\Windows\system32\ntkrnlpa.exe
  ==================================================

  Hello

  Don't forget to update the BIOS, chipset of low level drivers, embedded and other large
  device drivers - visit Site system manufacturer (manufacturer of motherboard for custom
  systems) and the sites of the individual manufacturers. The "BOLD" contains the necessary drivers
  update the USB system.

  -------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ====================================================================

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="" this="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

• Problems during startup and disc.sys blue screen

  I got hard to start that a 32-bit Vista computer does not move in front of the black screen, sometimes there is a blinking underscore, or the mobile mouse pointer. Usually I restart with ctrl-alt-del and it works, it takes sometimes a few tries.

  It also seems to start normally when I go out in the inside installation disc, when he's not here it hangs in checking dmi pool Data given, when he asked me to "press any key" If there is a disc inside.

  This happens only when the CD player is first in the boot order, so I change to hard first push which does not start again.

  If someone has encountered this?

  If I get to the connection, everything works very well afterwards.

  I was going to repair the installation disc, but it's moving before the Microsoft corporation at startup loading bar.

  Then, I got a blue screen PAGE_FAULT_IN_NON_PAGED_AREA with Codes and * disk.sys with address

  I tried CHKDSK and last good known Configuration, but nothing helped.

  In addition, it was after I reinstalled from the cd of installation about five days ago everything worked as well the first two days... the only problems I had were with the installation of updates, after I finally installed successfully, it's when, startup problems began.

  Any experience or advice appreciated!

  JMP

  You have two questions.

  1 - associated WRkrn.sys Webroot for Webroot SecureAnywhere I would remove it

  2-drive hardware problem.

  I remove Webroot and go the HD manufacturer download their utility check HD and run it.

  

• Receiver ataport.sys blue screen with windows 7.

  original title: reception ataport.sys bsod with windows 7.

  help someone? I have here minidumps

  There is a lot of confusion about this blue screen virus and how to get rid of.  This virus is in the root of the system, which is what makes it difficult because usually anti-virus programs that either do not offer the option scan the root or you need to tell him to do. As long as you use your computer, at least in Safe Mode, go to Kaspersky.com and download their RootKiller. Run a scan and if it works for you, pass it.  No need to analyze the minidumps, etc..

• Windows 8 Pro - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys) - Blue Screen of Death

  Hello

  I get a blue screen with the following error: PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys). This happens whenever I start. My computer will be turned on and be normal for the first five minutes, and then all of a sudden, I get this error.

  The computer I use is that I built myself. Here are some features:
  MSI - card mother B75A-G43
  -Processor Core Intel i5-3570
  -RAM Kingston 8G
  The computer is running Windows 8 Pro with Media Center (32 bit). I'm also using AVG Internet Security.
  I have not installed new hardware recently and the only software I had installed before this error was Adobe Reader XL
  Any help would be great.
  Thank you
  Vince

  http://www.Avg.com/us-en/utilities AVG Remover, I would like firstly, uninstall AVG, restart the computer, and then run the AVG Remover and restart another.     Try to run a day or so... on the default windows Defender.     AVG can be reinstalled quite simple if this is not the cause.

  Typically when its saying Page fault in nonpaged area... makes me think it could be bad memory, or some installed program writing to the wrong places.    Remove 1 stick of 4 GB? and swap to test each?

• FLTMGR. SYS blue screen during Windows XP repair

  So my secondary computer has had problems starting lately. And when he did start, it was only a matter of time before it would BSOD on a machine_check_exception. In the last two days that there so bad he has finished start up at all. So I found the XP installation CD and booted from that and tried to make the repair facility. Everything seems to be okay and he said that the computer will restart and Setup will continue. He gets to the Windows XP loading splash screen, but quickly then I get BSOD with

  STOP: 0X0000007E (0XC0000005, 0XF73E92B2, 0XF79C6490, 0XF79C6190)
  FLTMGR. SYS - address F73E92B2 base at F73D1000, DateStamp 480251da

  When I try to reboot from the CD, he wants to start the installation process

  and when I try to restart in safe mode, I get a message that says: "Windows XP Setup cannot run in safe mode. The installation program will restart now. »

  Hello

  I was going through discussions and saw that it had not received a response.

  Let's start by running chkdsk from the recovery console.

  Instructions on the entry for the recovery console is located at the following link:

  http://support.Microsoft.com/kb/314058

  While we are at the command prompt, type the following command followed by the Enter key:

  CHKDSK C:/p

  Allow to run chkdsk, and note that it can take some time.

  Try to restart it in normal mode when chkdsk is finished.

  Best regards

  Matthew_Ha

• Satellite L500 - 1XM Windows 7 iaStor.sys blue screen

  Hi I have a Satellite L500-1XM that keeps bluescreening with error iaStor.sys. It happens randomly between 10 minutes and a few seconds after the start (even in safe mode).

  I tried a memory test and that turned out fine. I checked the logs and they do not indicate hard disk failure or chkdsk reports any corruption or bad sectors.
  This could be the cause?

  Hi Mike

  Thanks for the comments.
  Glad to hear all is well.

• ATHR.sys blue screen, Help!

  When I was using Word to write a book, my computer suddenly crashed on me. It was a BSOD. The file that caused it was athr.sys. A few other things here I found on this topic.
  It was a Driver_IRQL_Not_Less_Or_Equal error.
  The code was 0x000000D1.
  Here are some of my features to the computer:
  Acer Aspire 5517 laptop
  Windows Vista SP1
  AMD Athlon 64 processor
  ATI Radeon graphics card

  Please help, thanks.

  Hello

  Go to Acer and get the latest driver wireless for your version of Windows.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Acer - drivers
  http://us.acer.com/acer/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3750&sp=page15e&ctx2.c2att1=25&miu10ekcond13.attN2B2F2EEF=3750&CountryISOCtxParam=US&ctx1g.c2att92=453&ctx1.att21k=1&CRC=2054404012

  By chance you run Stopzilla?

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How can I stop getting the win32k.sys error blue screen?

  This computer in the Shop 3 times ($$$) and still not fixed.

  . I've updated drivers, corrected the registry errors, changed the CMOS battery, had card mother replacement and addition of RAM maximum.

  Thank you

  David

  Hi, David,.

  Check the solutions proposed here

  W7 Bluescreen: system_service_exception

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/ad2b7744-4118-4e36-9d79-9ba25e73318e

  http://www.howtofixbluescreenofdeath.com/Win32k-sys-blue-screen/

  http://www.SevenForums.com/crashes-debugging/39979-BSOD-Win32k-sys.html

• Get netr28ux.sys "error on a blue screen.

  Dell computer brand new running on the pre installed Windows7 Pro bought four weeks ago

  and

  & nine TL-WN321G adapter purchased separately specifically because it is compatible with Windows7 Pro 64 bit pre-installed

  netr28ux.sys "blue screen error" has been crashing the OS of the computer of my home at startup - can someone help me to cure this?

  I read online that this file system is something to do with the wireless network card driver... not sure if it is the OS or driver... However, the pilot works fine, and I connect to the internet OK with it.

  I took a minidump files and the error is an error PAGE_FAULT_IN_NONPAGED_AREA (50) compatible caused by the netr28ux.sys, who is a driver for the wireless.

  No other third-party driver is involved in the accident.

  The problem may be only with the netr28ux.sys that could be damaged or updated to a problematic version.

  I would say to uninstall the wireless drivers are now installed and install the next version of Dell:

  http://support.dell.com/support/downloads/download.aspx?c=us&cs=22&l=en&s=dfh&releaseid=R290807&SystemID=INSP_DSKTP_560MT&servicetag=&os=W764&osl=en&deviceid=21861&devlib=0&typecnt=0&vercnt=2&catid=-1&impid=-1&formatcnt=0&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&fileid=433070

  If the problem persists, please provide the files minidump resulting.

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Blue screen errors in Windows 7 Ultimate 64 Bit again and again - NETIO. SYS System_Service_Exception

  Hello

  I have a desktop running Windows 7 Ultimate 64 Bit Operating System with Kingston Hyperx 8 GB DDR3 1600 MHz RAM, Intel 4th generation I5 processor 4670 3.80 GHz, Intel Desktop Board DH87RL, 2 x Western Digital 1 TB hard drive 7200 RPM, Sapphire Readon HD 6670 1 GB DDR5 graphics, Seasonic x series 650W power supply, adapter Tp-Link TL-WN422G wireless.

  Problem - every day 2 or 3 times a day I get a blue screen error NETIO. SYS System_service_exception. Below, I am paste all of the content of the DMP file. Please check and tell the problem as soon as possbile. I checked it by replacing the windows several times even in windows 8 and 10... I get the same error on blue screen.

  Link - DMP FILE

  Thank you very much... It has been 2 days, I disabled just driver WPF in Adguard and since I did not face any type of blue error screen. : )