Networking Power PC with intel Mac

Similar Questions

• HP 6310 printer all-in-one - wireless network with a mac?

  It's the hp 6310 printer while a capable with a mac (macbook pro) wireless networking?

  Well Yes, I just need to know what version of Mac OS X you are using to give you specific instructions.

  Make sure that your printer is connected to the router with an Ethernet cable and the printer is turned on.   Now, reboot the router by unplugging the power then plug back.  Wait for it to restart completely (about 60 seconds).  Then:

  -Go to the Apple (top left of your screen) menu > System Preferences > Print & Fax.

  -Click the "+" at the bottom of the white rectangle.

  -Your Mac will find your printer and the list.  Click on it once and click on the button 'Add', once it is available.

  Its just so easy.

  Your printer is ready to use.  Scan of him using apps preview or Capture of Image (in your Applications folder).  Press scan on the front of the printer does not work with 10.6.

• I can multiple processes with a Mac older and not Intel?

  .. When I'm on a new Intel Mac with AE CS4?

  I do not understand the question. Can you use computer A while using a computer B? You talk about network rendering? If so, then consider the two computers must be able to run After Effects and open the project that you are working with. Because After Effects CS4 work on processors with Intel (not PowerPC chips), the Mac architecture "not Intel" is a non-starter.

• wireless network device no 104 during the replacement of Intel 3945agb with Intel N 1030

  When replacing the wireless Intel 3945agb with Intel N 1030, the message card "wireless network device 104 undetected." system stopped. remove device and restart" appears.

  Intel ensures that these 2 cards are compatible.

  Model: DV-6600 series (DV-6660eb), built in 2007.

  Vista Premium (32 bit)

  No change on HW and SW since it was purchased

  BIOS: F5A (latest version according to HP, 2010).

  How to activate the wireless card Intel? (Download the BIOS of recent products with N 1030, such as DV6-6xxx 1xxx G6,...) ?

  Thank you

  solved flashing BIOS with whitelist F.5A deleted:

  http://www.BIOS-mods.com/forum/thread-HP-disabled-whitelist-mega-thread?page=15

• G4 250 HP with Intel 3825U: faulty BIOS causes Event 37, kernel-processor-Power

  Hello

  So I just bought HP 250 G4 with Intel 3825U with Win 8.1 on board. There is a problem as a scripited on Windows forum http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/event-37-kernel-processor-pow...

  Basicially the messesge says: X processor speed in a group there is restricted by the system firmware.

  The same their appeard on the BIOS first and modernized thanks to HP Support Assistant and Freddie boath 8.1 Win and 10. The laptop was right out of the box, I'm the first user. Temperatures are 40 ° C bleow. Their apperas when on battery and when it's plugged in. I put all the power options in Windows and BIOS to maxium.

  Tell me HP, will make you an update of the BIOS, or should I rush to the store to return the product?

  It is a Forum for users, no direct access to HP. There are a few employees here HP, but they speak for themselves, not HP. don't hold your breath for any type of BIOS update, or you can find a place where HP will announce an update of the BIOS in advance or even to explain the reason that issued it. If you have a privilege to return on the laptop I would promptly exercise.

• Hi, I have an older iMac with Intel duo core 2.16 GHZ, 250 GB HD, 2 GB of SDRAM and Mac 10.6.8. I want to spend 10.7 and I need to know if my CS6 will have some problems I'll be able to downgrade to 10.6.8? Thank you

  Hi, I have an older iMac with Intel duo core 2.16 GHZ, 250 GB HD, 2 GB of SDRAM and Mac 10.6.8. I want to spend 10.7 and I need to know if my CS6 will have some problems I'll be able to downgrade to 10.6.8? Thank you

  You need to ask questions of an operating system on an Apple forum

• VMware device with 2 network cards claiming the same IP address with two MAC addresses

  Hello.

  I see messages intermittent my gateway network two MAC addresses associated with a virtual machine running on a 5.5 ESXi host for the same IP address.

  The virtual machine is a MiTel 3300 controller for a VOIP system. the system is configured with two IP addresses, one on the local network and another with a public IP address in the DMZ. In the network configuration of the 3300, I assigned the address LAN IP at 00: 0C: 29:30:B2:B2 and the DMZ IP at 00: 0C: 29:30:B2:BC (Mac for network devices presented by the ESXi host virtual machine).

  On the host, I configured a vSwitch with exclusive access to two physical network adapters on the host machine. The vSwitch is configured with two machine virtual port groups, LAN and DMZ, with access to the physical network interface cards. Tab grouping of groups vSwitch port NIC, I replaced the order of failover of the switch to activate an active NETWORK card only for the Group of LAN ports and the other card NETWORK only for the DMZ port group. (I don't know how the content of the column of networks is determined. Neither is correct for the traffic on the physical switch. If these are configurable, please advise and I'll change the settings). The relevant parameters of vSwitch, groups of ports and VM are distinguished below.

  On the virtual machine itself, through the VMWare host, I assigned 00: 0C: 29:30:B2:B2 for the Group of LAN ports and 00: 0C: 29:30:B2:BC to the DMZ group port (best I can tell, anyway, since the MAC address field annoyingly obscures the last two digits of the MAC address - break if I invert the mapping) (, but all seems OK).

  The goal here is to make sure that MACs of ports vSwitch the 3300 is listening and sending always correspond to the physical ports that are VLAN Tag by the physical switch to ensure the routing. Generally speaking, it seems that what is happening but, intermittently, we cross one-way calls that suggests a problem of routing between us and our SIP trunk provider; coinciding with these incidents, I get an email along the lines of "the security in the network device has detected a conflict of IP address with two or more devices. The period of INVESTIGATION "DMZ. DMZ. DMZ. DMZ' is claimed by the following clients with MAC addresses: ' 00: 0C: 29:30:B2:B2' ' 00: 0C: 29:30:B2:BC'. »

  I did something in the configuration that would lead to this kind of collision intermittent? Have a hacked together a way to do something that could be accomplished in a way that is simpler and more reliable?

  Thanks for any idea that you can offer.

  Kind regards

  J.

  

  

  

  I probably don't fully understand your configuration, but it seems that you are not interested in using the collection of NETWORK adapters in the virtual switch of the VM MiTel 3300.

  If it is correct, why not create two virtual switches, each with a group of port (LAN and DMZ) unique and with a separate connection of (vmnic2 and vmnic1)?

  In general, collection of NETWORK adapters may be used to share traffic between uplinks and ensure that if one of the uplinks connect fails, a virtual machine still has access to the network.

• ESX uses network adapter with the mac address that is different than virtual connect reports

  Hi all

  Our ESX environment consists of HP C7000 enclosure, virtual connect 1 gb ethernet with a mixture of BL480c and BL460c. We just bought some new BL460c G7 with NIC NC553i to replace some of the oldest BL480c. We have configured Virtual Connect to assign mac addresses. In vc management consoleI see the addresses assigned to the server, but when I start the server displays a different mac address for nic #2 that vc does. NIC #1 has the same mac address of console management vc and in the server BIOS. When I install ESX also sees the 'wrong' for #2 nic mac address. According to vmware nic #2 has not any network connected to what should be if it was really nic #2 (according to the vc management console).

  When I look at the mac addresses in the BIOS none of the network interface card have the mac address assigned by vc. VC firmware is 3.01. I have attached the photos I see information in the management of VC and BIOS console. Someone at - it for clues to what is happening and how can I solve it? Thanks in advance.

  Kind regards

  GB

  Please refer to:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1001167

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  To determine the MAC address of the interface Board of the ESX host, run the command:

  # ifconfig | grep-i hw

  The output looks like:

  vswif0 Link encap HWaddr 00:50:56:41:5 A: 59

  The MAC address is in the first line after HWaddr.  In this example, the MAC address is 00:50:56:41:5 has: 59.

  Note:   The ESX host uses following addresses starting with 00:50:56 (as opposed to the address embedded in the interface itself).

  You can also review the output information and the esxcfg-NICS - l order MAC addresses.

• OS is erased on Intel Mac Mini 4 Solos (2006)

  Hello:

  -1-

  I bought 4 Intel mac mini solo on Ebay from a seller with more than 300 sales and a reputation for 100%.

  -2-

  The Macs were pulled from a working environment and sold in working order, but one with a CD ROM slot twisted and sold as parts.

  The operating system had been erased on all four hard drives.

  -3-

  None of the Mac started (i.e. played the startup chime) when connected to power adapters 100 W or an adapter to power 85 W and pressing the power button.

  -4-

  The keyboard and mouse have been non-responsive to startup shortcuts:

  -STROLLER -: command, Option, P, and R keys

  -B - Safe mode: command and S keys

  C - Boot from CD room: control and C keys

  -5-

  I opened a mac mini and replaced the PRAM Battery, reset the RAM and removed the hard drive.

  The hard drive has already been logged, but had no content.

  I also reformatted the hard drive with an iMac 2010 with four partitions:

  -1-5 start disk FAT 32 concerts and copied an image of a live installation of spin (LXDE) fedora linux light

  -2-2 GB of swap disk FAT 32

  -3-15 start Mac gig log disk

  4 - disk storage of data 37 gigas

  -6-

  The Mac does not start with a carillon.

  -7-

  I could not the mac to respond to the insertion of a disc to install OS X (10.5.6) black and a shortcut of command and C. The black installation disc is recognized on my iMac with OS X 10.9 2010.

  -8-

  -A - because the mac mini have no operating system, will they start and chime?

  -B-how to use the black OS X installation disc to install the hard drive?

  -C-is I have to get the existing image of an OS X 10.5 install on an Intel mac mini solo and copy it to the hard drive?

  D-is it possible to install OS X 10.5 with an installation disc 2011 Intel or Intel iMac mac mini 2010?  Could I point the installation of an external hard drive and then mount the hard drive installed in the mac mini solo?

  Thanks for your suggestions.

  You should get a chime of starting with no BONES or even no disc.

  Only the power light and remain lit?

  All the sounds of the Mini?

  On Mac computer startup tones - Apple Support

  What adoptive parent of power do you use?

  The only disks will install on the Mini are the original install (gray) discs that came with the Mini or retail (white). The original install disks of another model Mac will not work.

  Macs Solo can go as high as Snow Leopard.

  If the Mini shows life, you should be able to start the Mini in target disk Mode

  The 2011 native Mini with Lion and no installation disc

  The iMac 10.6.4 from 2010. If you fully updated on the iMac to 10.6.8 then you should be able to start on the Mini, but not before completely update. The iMac installation disc doesn't have the drivers for the Mini

• problem with my mac pro book and the appstore

  I have a problem with my Mac Book Pro (2.53 ghz processor intel core duo / 0sx 10.6.8) and the app store:

  My apps no longer works after upgrade on the app store... Help :-(

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Once logged in go to the Terminal

  type

  Open $TMPDIR... me.

  Delete the folder

  com AppStore.Apple

  Close the terminal

  Open the App Store

• allright, I have an Intel Mac using OS 10.5.8 and Firefox v3.5.17; version 4.0, version 16.0, this is all very confusing? Will be forced to change soon

  I have an Intel Mac using OS 10.5.8 and Firefox v3.5.17. It works fine and I don't want to change I like Firefox 'exactly' like that! That said, I'll be forced to update soon, I'm afraid. Looking at and trying to update to the latest version, many conflicts have developed. The update regularly which brings me to the wrong version for my OS. So, which version will be later that will absolutely work for OS 10.5.8? WHY I find that 4.0 X is the best then, 16.0. is the right one?

     Why are the versions so vastly separated??
     Nothing makes sense. Please help before I convert to Chrome permanently!
  

  Thank you.

  You have only two ways out of updating to OS X 10.6.8 and Firefox 16.0.2 or version of ESR Firefox 10.0.12.
  
  In regard to safety ESR version would be the best choice and would go for this version see if web pages continue to complain.
  
  In case of complaint you can always try 16.0.2.
  
  With older hardware, you will always hit sooner or later a barrier and will consider updating your hardware (which in this case may be a new computer).

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• How to use the adapter from the wall with my Mac Pro laptop?

  How to use the adapter from the wall with my Mac Pro laptop?

  The AC wall connector is not compatible with the outlet on the MBP?  As the MBP charger will work from 100v to 240v, a transformer is necessary.  You need a converter that connects to the power outlet home and is compatible with your MBP.  You can buy the Apple travel kit:

  http://www.Apple.com/shop/product/MD837AM/A/Apple-world-travel-adapter-Kit

  Or you can use a single specific converter for the geographical area:

  http://www.Amazon.com/orei-grounded-universal-adapter-Singapore/DP/B004SCSV2U/re f = sr_1_4? ie = UTF8 & qid = 1460735377 & sr = 8-4 & keywords = us + in + uk + power + adapter

  (it is a UK USA example)

  Or you can get the converter that adapts the charger directly:

  http://www.Amazon.com/HIOTECH%C2%AE-extension-charger-connecting-specification/d p/B00MA48JZW/ref = sr_1_3? ie = UTF8 & qid = 1460735486 & sr = 8-3 & keywords = us + in + uk + power + ad aptor + apple + charger + cord

  (again, this is for a UK plug.)

  Ciao.

• Strange problem with wireless MAC

  I think I have a rather unusual question.

  The problem is that my Macbook Pro (osx Lion) is not able to access my Photosmart B109n wireless. I can only connect via the usb cable. I share the printer with two other laptop users (windows), but they are able to connect wirelessly. I have reinstalled the driver several times and tried to install the network configuration again and again but nothing works. This problem exists already for a long time, also until I upgraded to Lion.

  I am convinced that the problem is not due to my router. At school, I'm not able to use the HP color LaserJet as well and I can only print via ethernet. In other words, there is something wrong with my mac. Seriously, I don't know what it could be.

  Our "home network" is called "Fitz". Whenever I try to install the network printer configuration, the printer asks the key network and attempts to connect to "Fitz". Whenever the printer is able to connect to the network. After that, the config. Assistant told me that I can remove the usb cable to continue the installation. Then the problem happens. At the moment I have remove the usb cable, the laptop immediately tells me that it is not able to connect to the printer, because I am not connected to "Fitz" (I'm always) and I can only use the wireless printer if I am connected to "Fitz".

  Reset the print/fax list no longer works!
  
  Please please can someone help me? Thank you!

  Nevermind, I was able to solve the problem today!

  All I had to do was pick "Shared printer on the network" check box in the printer preferences. Gosh, if I had known this before... I was not able to print wireless for 5 months. Makes me so stupid.

• problem with intel proset & atheros and M30X

  Hello

  I have problem with Intel PROSET. When I opened this program can't do anything just because my Wireless 2200 BG is not be listed in "network components. Moreover in Atheros I'm not able to do anything as well. It can suggest the problem with the driver, but I managed to connect to my friends wireless net. What can be wrong?

  I have my own installation of Win XP SP2 with all drivers and programs of Toshiba tools & utilities. (I had the same problem with recovery of victory)

  Thank you in advance for your help!
  Happy user of T M30X

  Hello

  I guess you have INTEL Wireless Card. After installation of SP2 to check if there is some conflicts in your device manager. You can update driver for the wireless card. It is always good. :)

  As BOB said go to https://eu.computers.toshiba-europe.com (then adapter & download of drivers and downloads).

  It is driver for your Intel (V. 8.0.12.9000W2BG) wireless card. Install it and check is there no conflicts in Device Manager.
  If this is not the case, turn your wireless card and FN + F8 to enable the wireless connection.

  If you re router wireless works correctly and if your WLAN has a name you see now. I know it's sometimes very complicated to establish the connection, but you must try all the options.

  Please let us know if you are creating your successful login.