New map added automatically?

Similar Questions

• New map of apex

  Hi, apex includes a set of maps for the regions of the map, but I want to kown if it is posible to load the new maps at the apex and there documentation where I can find how do and what do I need to do.
  
  Thank you and grettings.

  Hi user11173393,

  Tony's response is not actually correct - you don't require any additional license to achieve what you want to do. However, you need to make a number of manual steps to achieve what you want to do. Unfortunately, I don't have a paper outlining the necessary steps right now but I'll try to put something together, when I had the chance.

  AnyChart maps, AnyMaps, are integrated into our release of APEX. For an overview of the AnyMaps, please refer to the AnyChart online documentation here: http://anychart.com/products/anymap/overview/. AnyChart maps are in a particular format, .amap, so if you want to intregate new cards in your instance, they would need to be in the same format, .amap. AnyChart provides a conversion, Flash card converter (http://anychart.com/products/anymap/converter/) utility to convert some of ESRI ShapeFiles (* .shp) in. Files of the AMAP. Once converted, your new .amap files should then be added to your \images\flashchart\swf\maps\ folder and then referenced via custom in your area of the map XML. In order to associate data with maps, AnyChart provides information of reference map (http://anychart.com/products/anychart/docs/users-guide/map_reference/maps-ref.html?fromtree). We integrate these map reference information in some of the tables (wwv_flow_flash_map_files and wwv_flow_flash_map_regions), that allows us to then expose the information in the map Wizard. When you use the AnyChart Flash map converter, you can choose what information you want to your .amap file to keep. You will then need to refer to this information in the generation of data customized for your card. As I said, achieve what you are asking for would require a number of manual steps... and you must be first ShapeFiles too, in order to be able to use the tool of conversion of the card. The tool itself is relatively simple to use. Connecting your new maps and data will be just the trickiest part.

  Kind regards
  Hilary

• IOS 10 - new map app - how to find written directions

  IOS 10 - new map app - how to find guidelines for travel written car =

  Hello jsalm,

  Thank you for reaching out to the Community Support from Apple. I would be happy to help you find the instructions written in the Maps app.  Once you enter your destination and started browsing, slide up from the bottom of the screen and select "Details". You will find a list of indications turn-by-turn for your itinerary.

  If you have problems, let the community know. We are all here to help.

  Best regards

• New mapping RV042 Shrew soft client NAT - t

  Hello world

  Because I had the fast VPN problem, so I tried the customer sweet shrew in the hope of getting the IPSec tunnel with RV042 router mode Client2gateway.

  The Shrew client, I had "Tunnel is activated" but I got established has no errors.

  RV042 IPSec log, he ended with: NAT - t: x.x.x.x new mapping.

  What it means?

  Thanks for your replies.

  Hi h.dam,

  If the tunnel is activated and the display put in place = 0, two phase errors.

  Please you found the file attached to this message "With ShrewSoft RV042" and follow all the steps and share the result with us after your tests

  Please rate this post or marked as replied to help other customers of Cisco

  Greetings

  Mehdi

• Problem adding new map video to p6-2310

  I have the Pavilion P6-2310 (8.1 Windows 64-bit) and I would like to add a new video card in the empty PCI-E slot in the machine.  I would also like to keep the embedded video feature that I am looking to drive 3 monitors.  I have an older GeForce 7300LE I tried to put in last night and was able to get the card works by turning off Secure Boot and by activating the Mode of inheritance in the BIOS, but then the machine would not recognize the embedded video.

  There is no settings in the BIOS to enable/disable integrated video (BIOS is FRIEND 8.04), so I wonder if there was something to keep the car video while using a PCI-E graphics card.

  Any help would be greatly appreciated!

  Hello:

  When you install a discrete video card, the integrated graphics card is automatically disabled.

  Please consult the video card to the motherboard of your PC on the link below.

  http://support.HP.com/us-en/document/c03329340

• Virgin Media UK has changed his ISP address and I cannot add the new address through automatic or manual, how do I do it?

  Virgin used to use google for it's email service has recently created a new ISP of it own. I'm unable to find using the automatic "Add account" in Thunderbird. I tried to do it manually without joy. I can't get into my email account using webmail blank page. Any suggestions please?
  GMN

  Via the Menu bar
  File > new > existing e-mail account
  or
  Via the mail toolbar
  Icon of the menu > new message > e-mail account

  Enter the name
  Enter the full e-mail address
  Enter the password - same one you use to access webmail

  Select this option to remember password.
  Click on "continue".

  Thunderbird tries to search for configuration settings.
  Check: He selected the right account type: POP or IMAP
  Are the correct settings... see info at the link below.
  the manually set/correct
  Click on the button "Manual Configuration".

  See here the setting on the server:
  http://help.virginmedia.com/system/selfservice.controller?configuration=1001 & PARTITION_ID = 1 & TIMEZONE_OFFSET = & usertype = 1 & VM_CUSTOMER_TYPE = Cable & cmd = VIEW_ARTICLE & article_id = 2743

  According to your email... the portion after the @, this will determine what will be the name of the server for POP/IMAP/SMTP.

  Use the "Re-test" button to verify the changes.
  Click 'Done' to create the email account.

• How to change which opens a new tab when: automatic configuration does not work?

  Hello
  For some unknown reason, my new tab changed from google to a weird yahoo one today. I can't find how to restore it back even after I did google my homepage and default search engine. I checked online and saw that maybe I could fix things with the car: config but I can not even open. When I try a search engine opens. Any help would be appreciated.

  ^:
  I use it on: on the home page and use a mozilla.cfg file to do this automatically for each Firefox profile and use this file in every version of Firefox, so it's always close at hand.

• When you open a new window, it automatically loads the last content pop up (?) and I'm unable to type in the address bar or open a new tab in the new window.

  I don't know if they are technically pop-up windows (for example, if you perform a search on kayak.com, it will automatically open a new window of priceline.com with the search results), but that happens with Blocker on or off. Other examples are a little info to a financial site window or .edu, which opens a session is about to expire, or answer a FAQ (with the exception of the priceline example, these windows have an address bar or view a URL). In any case, once these windows are closed, if I try to open a new window, it will automatically load the content of this "pop-up". Whenever he does, I'm unable to type in the address bar or open a new tab in this window.

  How can I fix it? What I want is to open a new window which is empty, not load the previous contents.

  No, I just realized that I was holding Command-Shift-N rather than command-N

• When I use right click and open in a new tab, how to make the new current tab automatically?

  Whenever I did a right click on a link to open it in a new tab or use the control + left click on a link, the current tab remains active, and you must manually select the new tab to see. Is there a way to change that, without the help of shift + left click to open a new window?

  I know it's a minor inconvenience, but it would be nice if I could make this active new tab automatically.

  Thank you.

  Hello

  Go to Subject: config seek browser.tabs.loadInBackground change to false

  • Subject: config

• Sport clip do not order alphabetical new music added

  I have used the Sport Clip for a few months now and when you add new music by drag and drop on my albums new PC are in alphabetical order as expected. Now, all of a sudden new albums are added and remain at the bottom of the list instead of in alphabetical order... why would this happen? Clip is connected to the PC and I will review the entry music they are displayed properly classified in alphabetical order, but not on the Clip itself when removed from the PC.

  Wow, this is so great! thx a lot for the solution... you da man.

• HP Envery Phoenix 810: New PC, added my own SSD, how to move Windows?

  Hello

  Just got this new PC, but it did not come with an SSD, so I added my own. But I can't understand how to get Windows installs it. I want it to become my main boot drive.

  Delivery to zero/system restore does not give me an option to specify a drive.

  Since this is brand new, there is no problem with wiping the disks completely and starting over.

  Anyone have any ideas?

  Thank you!

  Greetings,

  810 HP PC usually have a 256 GB or 512 GB SSD drive option available for purchase.

  Create HP Recovery DVD discs or USB key to aid Recovery Manager from HP.

  Exchange in the new SSD on SATA0 and run recovery using DVD or USB recovery drive to the new drive.

  This will create a new installation, so save the good things before doing this.

  You can also clone the drive using third-party cloning software, but if you are interested in going to win 10 it could cause upgrade problems. Some third-party cloning software changes the disk partition SSID that cause the Win 10 upgrade fails.

  Some SSD drives come with the cloning software. Install the software, connect the SSD to your PC via the included USB adapter and run the cloning software to migrate OS to SSD. Then, install the SSD on SATA0 and start Windows on your newly installed SSD.

  Again, if the SSID is changed using the cloning software SSD manufacturer, you can have a problem upgrading to win 10.

  So, if you want to win 10 then do it (upgrade) before installing the SSD.

  Hemdani

• Windows Live Mail - compose a new Message - periodic automatic saves text to air currents - is this feature available?

  .

  Saturday - 14-Feb - 15 - happy Valentine's!

  .                 Subject ZERO degrees here at PierPort, Michigan

  .

  Topic: using Windows Live Mgarlic - composing a Message

  .

  I have to Save my text in progress FREQUENTLY

  using Cntrl& S - but...

  My wife often loses the text she enters

  due to an error of input from keyboard or other.

  It's FRUSTRATING for her.

  .

  Is there a WLM 'feature' to

  set up regular AUTOMATIC saving of

  the text into a new email-

  every minute or so - or - as often as you want?

  .

  -eof-

  .

  J

  As much as I KNOW WLM doesn't have this feature.

• new line added at the top of advancetable

  Hello

  IAM trying to add the line in a table dynamically so i have used adds the concept of line in the table advance.

  But while trying to add new lines they are added to the top of the current line is not the bottom of the current line.

  can someone help me please how to reach this.i want to add new lines to the bottom of the current line.

  Hello

  When inserting new line in take VO control in the last row and try to add a new line after the last of them.

  Below the code could help.

  public void InsertRecord() {}

  TempVOImpl vo = getTempVO1();

  vo.setMaxFetchSize (0);

  Line TempVORowImpl = (TempVORowImpl) vo.createRow ();

        VO. Last();

  VO. Next();

  vo.insertRow (row);

  row.setNewRowState (rank. STATUS_INITIALIZED);

  }

  BR, 906099

• Added automatic external library in my site

  Hi you

  Now, I have a question about coding,

  Today I just saw some links added external library automatic in my site when I inspect element, after seeing I want to find all of the code that calls the external library in my source code but not found.

  So I wish all of you help with this problem.

  -Here is the link of my site: Sokha Phnom Penh hotel: 5 stars Hotels, Royal Palace

  -Here's what I found:

  

  Best regards

  Seakheng

  Your changes to your code in the admin by publishers. One or more of your browser plugins injects the code in there.

• Replicat breaks down. What new table added to the source

  Hi, I use a gr 10, 2 on Linux configuration (using the MA) and then a 11g. I have a setup of goldengate. Everything seems to work fine except when it adds a table to the source that it reproduces on target? and the replicat gets abbened-ed to restarting
  
  My param extracted
  
  -extract ext1 param-
  extract ext1
  TRANLOGOPTIONS LOGRETENTION DISABLED
  -connection to the database.
  username password XXXXXXXX XXXXXXXX
  -hostname and port for trail-
  EXTTRAIL/u02/gg/dirdat/ea
  discardfile /u02/gg/discard/ext1_discard.txt,purge
  DDL INCLUDE ALL
  table SCOTT.*;
  table HR.*
  package SCOTT.*;
  
  is my param replicat
  
  replicat Rep1
  -the source and target definitions
  ASSUMETARGETDEFS
  -connection to database target-
  XXXXX UserID, password XXXXXXX
  -file for dicarded transaction-
  discardfile mnt/gg/discard/rep1_discard.txt, append, megabytes 10
  support - ddl
  DDL INCLUDE ALL
  DEFAULT DDLERROR IGNORES RETRYOP
  : Specify the table mapping.
  map SCOTT.*, target SCOTT.*;
  
  Thanks for the help
  
  Published by: Aj05 on February 15, 2012 13:49

  Create a new table of test and follow his creation (or error) from source to the target. Scott on the target has privileges to create tables?

  In addition, check the syntax in your snippet. The line for HR is missing a semicolon. And what is your reference to use the PACKAGE in the excerpt?