New regulation for sick leave Plan

Similar Questions

• Restriction of sick leave at SSHRC

  Hello
  
  We are implementing absence management/interest in 12.0.6. We have a requirement that when employees apply for more than 3 days of sick leave to SSHRC, they should get an error contact HR if the sick leave is more than 3 days but HR should be able to save sick leave with more than 3 days in Core RH. I tried to use days_between > 3 in the duration of BG, but it prevents employees and human resources of the application over 3 days of sick leave.
  
  As a solution, I divided in two occasional absences for sick leave which may not be up to 3 days sick leave and sick leave extended that may extend beyond 3 days and used the item even for the two HR should thus be able to generate a report on the total number of days sick. Also, for extended sick leave I have not assigned a category so it can be hidden SSHRC.
  
  I would like your feedback on if this workaround is logical or if there is no option to use only a single absence type but stop employees and let HR where the length is more than 3.
  
  Thanks for any direction you can provide on this...
  
  Thank you
  Jay

  Hello

  make this type of unique sick leave and,.

  1. If the sick leave days > 3, then send it to HR for approval. or
  2. If, in your formula lack of BG, put the validation on the responsibility, if SSHRC RESP then display error, if the error to see the TSD HR RESP.

  Concerning
  Ayaz

• Sick leave

  Hi friends,
  
  I have a requirement that there should be only a sick leave as a type of absence. When the employee chooses its paid sick sick for 10 days and if the employee chooses to more than 10 must compute as cut paid sick leave. Here when he goes for approval this sick element must divide it into 2 items if 10 days paid leave and cut more than 10 days paid sick leave. Is it still possible?
  
  Or the best option would be to define 2 items paid sick leave and unpaid leaave sick and the employee cannot select paid sick leave unless he carried out 10 days, is it possible?
  
  We do not use accrued as leave customer don't want to not to show the balance, but in fact this requiremnt can be fulfilled using expenses to pay
  
  Please help me with workarounds.
  
  
  Thank you

  1. as I think understand that having a single item for sick leave (property: information, payroll run, Multi entrty allowed)

  2. it will go for approval once employee Submit request.

  3. If it is approved, you can take care of payroll using the quick formula for how to pay according to your requirement according to the number of days.

  Thank you

• It doesn't damage my new ipad if I leave it on the charger for a long term I

  It damaged my new ipad if I leave it connected to the charger for extended time? As for the weeks.

  No, it will be auto load when it is full.

• I was going to pay for my monthly plan, but for some reason any, that I couldn't find my plan, then automatically right, I thought it had been deleted since I did not pay for my plan in due time. So I made a new plan, but now that I paid for my monthly pl

  I was going to pay for my monthly plan, but for some reason any, that I couldn't find my plan, then automatically right, I thought it had been deleted since I did not pay for my plan in due time. So I made a new plan, but now that I paid for my monthly plan twice, and well, it sucks a bit... So what to do? And can I get my money back?

  For assistance, please contact our support staff:

  FAQ: How to contact Adobe for support?

• How to set up an installation of sick leave

  Hi all
  
  I need your help that how can I do the following configuration of sick leave process in Oracle pays according to the exercise program that some sick leaves are being the right to sick leave years next balances.
  
  1 employee that leave are maintained and carried on the basis of employee hire date anniversary year
  
  2 - leave per year allowance is 90 days, but the days and their respective deduction is logically divided into three following categories
  -Full time paid off - 15 days
  -Half paid - 30 days
  -Unpaid / No Pay - 45 days
  
  Note: We have only one type of absence - sick and its corresponding element
  
  3 - the sick leave report at the end of the anniversary date respective rental must be by the following breakdown
  -Full-time paid off - 0 to 15 days - according to the available balance
  -Half paid time off - 0 to 15 days - according to the available balance
  -No paid/not paid for - 0 days
  All carry them forward sick accumulates to the segment to pay next year many sick leaves which is annually complete payroll can only increase, while the other two logical segments would be update to its values of law
  
  Sick leave the ceiling
  Full pay - 90 days + 15 days
  Pay - 30 days
  No compensation - 45 days
  This means that the total balance of leave can have any employee is (90 + 15 + 30 + 45) 180 days
  
  I need your help to configure this as
  Sick leave accumulation Plan & fastformulas for the maintenance of the balance
  Deferral of sick leave on FastFaromulas
  Deductions of sick leave
  Deduction of sick leave for employee final settlement processes
  
  Waiting for your answers and assistance
  
  Kind regards
  Usher

  Hi Usher,

  If you want to assign the right to sick leave at the beginning of the year itself, probably you do not need exercise and postpone the formula Setup. Not the best, but what you can do is the following: -.

  1. create after four pieces of information.
  i. sick leave
  II. the sick leave FP (full payment)
  III. the sick leave HP (half paid)
  IV. leave (unpaid) NP
  PS bottom three might be indirect items.

  2. create three balances for over the last three elements and give initial feed (a time of installation only)

  3. employee apply only sick leave (the order in which accounr will be used would be fully paid--> paid half--> unpaid). You can write this in a quick formula of sick_leave_fast_formula or to the hook of the user.

  3. at the end of the year, run a program customized for rested / break the balance in accordance with the accrual accounting policy mentioned by you.

  Thank you
  Avinash

• Need a new mothherboard for Equium A60

  I tried suggestion given in the forum but I am always sick, I think I need a new mothherboard for Equium A60, I searched on the Toshiba site but tere does'nt seem to be links or place where it is said you can buy a home, HELP!

  As much as I know, that you cannot order parts for laptop direct from Toshiba.

  You can do this in some independent electronic store, perhaps by approved maintainer Toshiba or on eBay. I recommend you check out eBay. Here you can find many hardware components for various Toshiba laptops.
  With a little luck you can find mainboard for your model of laptop also.

  Check it out.

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate

• I installed a new game for Pc windows 7 & I got the support of the United Nations, is at - it software to install to run all the games correctly?

  I installed a new game for Pc windows 7 & I got the support of the United Nations, is at - it software to install to run all the games correctly?

  All games (or programs) are compatible with Windows 7. See the Web site of the Publisher of games for compatibility information.

  Windows 7 has compatibility mode that peuvent leave some older games that would be otherwise incompatible for work. Please see:

  http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .

  Very old games can contain 16 cold bits that will not work if you have 64-bit Windows 7 without Virtualization software.

  What is the name of the game?

  Are you using windows 7 32 or 64-Bit? *

  * To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• new case for hp m9450f

  Hey I wanted to get a new case for my m9450f anyone know if:

  1 card mother using stand offs or is it directly bolted to the rear of the case?

  2. the I/O plate comes off or is it attached to the case?

  BTW I plan to get the corsair 600t, the plate of I/O is not a big problem, but if the Board is screwed into the case is anyway I can transfer the motherboard for a new case.

  Motherboards generally use spacers though some cases have accumulated mounting plate for the motherboard and spacers are not necessary.

  The I/O plate if I understand you well is part of the motherboard.  Most mATX cases should not be a problem.

• Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be

  Hello, I would like to take advantage of the promotions on Adobe Photoshop for a single user (valid until tomorrow), but I have two questions.  First of all, I intend to buy a new computer for a month and for the moment, I don't know if it will be a pc or a mac. Do I have to decide at the time of the purchase, what system I'll use?  Secondly, I also have a plan for about a month to open an individual company. If I buy the program as a person, could I then use it as a business?

  Creative cloud is cross-platform. Licensing is not serious. By definition, an "enterprise" might as well be a single person. It is totally irrelevant, as long as you purchase a full license appropriate regardless of any promotion.

  Mylenium

• Try to get a new battery for A1189 for a 17 inch MacBook Pro 2008

  Need a new battery for my MacBook 2008 Pr A1189, cannot find them on the Apple Store and not those who are genuine available elsewhere that I can find it, a lot of one on Amazon etc, but they are safe and reliable?

  Apple stopped making batteries for these years. There are many piles of counterfeit around, showing most on auction sites, but I've seen a few reports here of them bought on Amazon.

  I trust Other World Computing and they have this:

  https://eShop.MacSales.com/shop/apple_laptop/batteries/MacBook_Pro_17

  You can also view Global Batteries:

  http://www.global-batteries.com/product_info.php/cPath/1_12/products_id/8839

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• How can I download the Apple News app for my iMac

  Hello

  How can I download the Apple News app for my iMac, I have on my iPad but can't find it for the Mac, is it not available on Mac or he has another name for the iMac?

  Thank you

  There is no version for OSX.

• I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him. However, the phone doesn't seem to work. Also I don't have apple care more.

  I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.

  You will pay full price for a new iPhone.

  Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support