new type of fraud for iTunes?  !!!!!

Similar Questions

• My new 6 iPhone says: unable to connect. Your identifier Apple is not enabled for iTunes Connect ~ (2002) Please help!

  My new 6 iPhone says: unable to connect. Your identifier Apple is not enabled for iTunes Connect ~ (2002) Please help!

  Hello

  Have you used this Email address & apple id on another device from apple

  Before the address e-mail is able to send & receive emails?

  See you soon

  Brian

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Update Apple software for iTunes, update

  Today on my Windows 7 64 - Bit, Apple Software Update detected an update for iTunes; but it would not be installed without error.  Not able to reproduce the error code, I believe that the error was on the download.  Finally, I installed the updated version by using the manual download under Tools feature; but Apple Software Update acted special on my attempts to update automatically.  When starting it in the menu start, Apple software update would open in two windows after the initial failure to download and install.  Quick Time Player and iTunes opens and do not yet detect updates.  I hope that I did not install anything that is damaged within this new update.

  Post edited by: troothteller

  Restart WINDOWS 7 and press F7 to go in safe mode, and then try

  If it works, you may have something installed preventing the execution

  If this is not the case, delete what you have for iTunes and DL again.

• Type of file in iTunes

  How can I show or enable the type of file in iTunes? It displays only the album, the song title and track number but not the file type.

  Albert,

  In iTunes, file type is in the column "type".  Go to view > show view Options.  Make sure that the display is set to the songs, and then you can check the box for the genre.

• New type of spam - giant JPEG image with virtually no actual text.

  It seems to be a new type of spam that I receive. It is composed of a few words of the text itself, but the majority of it is a large JPEG image that contains text and images. It's almost like if spammers have taken a screenshot of its Web site and sent the image.

  Is it possible to set up a junk e-mail for this filter?

  They have two reasons to do so. We have to eliminate the text spam filters recognize part of the image. The filters will have to use optical character recognition to catch him. Much too slow and cumbersome. The other is that whenever your email downloads an image, that shows the sending server not only that the image was recovered, but IP address and email address he went to. They know then it is a direct e-mail address and will increase the amount of spam you get.

  In Outlook, you can prevent the download of the images until you click on a button in an email to good he (low field).

  

  I don't know if the Mail has a similar option. If so, turn it on.

• Separate places for iTunes media library and database

  I am currently using iTunes with my iTunes together on a NAS library and adding pieces can take forever. I want to do the following:

  1. keep my music in a folder on the NAS

  2. continue to use iTunes to manage and organize songs with the structure of the artist/Album/song, I added new things

  3. move the iTunes itl and xml files to the local hard drive

  4. without having to rebuild the database, if possible. I have a massive collection and the database on NAS won 48 hours.

  Can someone help me get there where it won't take me another 48 hours to rebuild?

  Not 100% sure it will work properly...  I know that you are your whole iTunes on the NAS.

  On the internal drive of your Mac, in the folder of music the user account, create a new empty folder called iTunes there.  This is the default location for the folder iTunes (with library databases and media folder).  If there is an existing folder (currently unused) iTunes , delete or move to another location if you want to keep it.

  Quit iTunes if it is running.  On the NAS, open the iTunes folder it (using the Finder) and copy all except for the iTunes Media to the (empty) folder folder iTunes disk internal.  Hold down the Option key and start iTunes. Choose the iTunes Library.itl file in the folder iTunes of the internal drive.

  In the pane iTunes Advanced preferences, is the location of the folder iTunes Media on the folder iTunes Media on the NAS, or (by default) location in the folder iTunes on the internal drive?  If he has given to the default location on the internal disk, click change , and then select your iTunes Media on the NAS folder.  The TWO boxes there to keep iTunes Media folder organized AND copy files to the iTunes folder when adding to Library Media should be checked, if they aren't already.

  Now, the real test is to see if your songs are related to files of song on the NAS, or if iTunes has lost track where the song files.  Try to play a song.  If she plays (you don't see a symbol of an exclamation mark next to songs in iTunes), then iTunes is access to the file of the song of the SIN.  If iTunes cannot locate the file of the song more and invite you to search for, locate the file of the song on the NAS for iTunes.  Using this information, iTunes can extrapolate where its music files and find them.

  If what I described is not working properly, you can run Option in iTunes using your iTunes library on the NAS and try another method.

• How long for iTunes

  How long normally does for iTunes to pick up new episodes from their published? Podbean using for my hosting. Downloaded my 2nd episode this morning, but iTunes is not picking it up. IM assuming that them takes some time, but what is normal?

  When you add a new episode to your stream and download it, it immediately appears for subscribers because their iTunes application reads the stream directly and the store is not involved.

  However, due to the multiplicity of the podcasts in the store (in thousands) the store caches the flow and it checks updates periodically. For this reason, there are usually 1-2 days for new episodes to appear in the store: sometimes it can be lower, and sometimes the whole process seems stuck and it may take several days.

  You should check your supply you signing up, either from the page of the shop, or manually in the menu "Advanced" in iTunes, check that your new episodes are there. If this isn't the case, then you have a mistake any (for example, a duplicate tag "guid"). If all of your episodes appear when you subscribe the store must catch up after a bit.

  When you have a query, it is recommended to display the URL of your Store and your feed iTunes page, otherwise I can give you only a very general answer. It may be that there is a problem with your workflow even if as I say a few days late is quite normal.

• HP 2000 model 2c32N4 main types of replacement for ABC etc.

  What are the main types of replacement for HP 2000 model 2c32N4?

  Part number:

  For use in the United States 698694-001

  On eBay:

  http://www.eBay.com/ITM/HP-Home-2000-239DX-2000-2A08DX-2000-2A18DX-2000-2A28DX-keyboard-698694-001-new-/321192859318?PT=PCA_Mice_Trackballs&hash=item4ac89616b6

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation.

  The Parental account for my child's account has been disabled for inactivity and to accept the new terms of use for the xbox update must be parental confirmation. I can't do this because even when you type the parental email address in the password recovery, it does not recognize because because it is inactive. I need a Windows Live technician to reactivate the account and I don't know if I should put the email address of the account here for security reasons. My other question is also if you can't reactivate can you switch parental permissions to another account.

  -Thanks, Michael

  Hello

  What version of the Windows operating system is installed on your computer?

  I suggest you to refer to the following article in the Xbox and check if it helps.

  Xbox LIVE connection issues:

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  If the steps in the section of the Xbox did not help, then it would be better to post the same question in the Windows Live ID portal and forum Xbox to get help. We have a dedicated team to help you with questions of this type.

  Windows Live ID Portal: http://www.windowslivehelp.com/product.aspx?ProductID=10

  Forums Xbox: http://forums.xbox.com/

  Hope the information is useful.

• How to set up the new switch/ports/NIC for MS iSCSI initiator

  Hello

  I'm looking for data on our main server snapshot and then include it with our VM through scripted admsnap commands. I found that the only way to attach/detach when the server is running must be involved in the Microsoft initiator path.

  I am now tripping over the implementation of networks necessary for this virtual machine display the SAN using the initiator.

  Our up to date is:

  vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

  vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

  vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

  http://i44.Tinypic.com/20pezr4.gif [line] 

  Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

  Thank you.

  Hello.

  vSwitch0 that vmnic0 & 1 (range 192.168.1.x) and is used for LAN traffic for the virtual machine

  vSwitch1 that vmnic3 (192.168.252.x range) and is used for SAN storage processor has

  vSwitch2 that vmnic2 (range 192.168.253.x) and is used for SAN B storage processor

  Our ESX box can connect to the LUNS on the area of SAN ok but I just can't get the same ping VM after the addition of two new network cards and to configure them with the correct IP address, which I suppose is because the 192.168.252.x and 192.168.253.x ranges are not present on the virtual machine and there is this problem I would appreciate some advice on SAN storage processors. How you allow the virtual machine is to use vSwitch0 & 1

  I'm guessing that you have added two new adapters with the label 'VM Network' network to this virtual machine?  I'm also guessing that vSwitch0 has no access or routing to the storage network.  If so, you will need to do is change the vSwitch1 and vSwitch2 to add a new type of virtual machine connection.  Click on the 'Properties' link beside vSwitch1/vSwitch2 and in the tab "Ports" click on the button 'Add '.  Choose 'Virtual Machine' in the type of connection, it give a descriptive label and click Finish. Then return to the virtual machine (change settings) and change the network connections in your virtual machine to point to the new label, that you just created.  Finally, configure or verify) addressing IP in Windows and try the Ping again.

  Good luck!

• not sure, instruments, file types and export for lightroom

  Hello:

  I am a new user of LR and new to the process of dam. I'm confused about something that is without doubt essential and fundamental in this process. My computer configuration is two internal drives (car and a working archive photo), as well as the external backup and burn to dvd. Using LR for image adjustment and catalog management (do not use Photoshop).  I will be the conversion to DNG on ingestion for raw. I add metadata loose on ingestion and then align the images in LR to rate images and making adjustments to the base image. These images are then archived that original.

  Now, if I do work extra on these archived images (addl. setting of the image or metadata) these images would consider instruments?  If so, I would then go to export in LR to add (for example, masterfile, master.dng or .tif) file name before you send, for example, a derviative work file before sending it to the archive?

  Also, if I send you these archival footage, but do not send email or web, do I need to change the DNG to another type of file (for example, tif)?

  Finally, I have a few old jpegs on cards with media that I want to put in this process. Is there something special I need to do in the treatment of these images against dealing with the raw?

  I read the dam book as well as reading through various resources online, but this process is quite confusing for a beginner.

  Please answer at any time.

  Thank you

  Joe.

  Lightroom is a non-destructive Editor. This may be different from what you have used in the past.

  With publishers not destructive, there is no concept of original and derivative (except if you choose to use a 2nd program like Photoshop, it seems that you do not intend to do). With an editor not destructive, you make your changes in the Editor (Development Module), and these instructions are stored in Lightroom as a 'recipe' and not as a separate file on your hard drive. These instructions on your changes are applied whenever you use Lightroom to display your image (or whenever you choose to print from Lightroom do a LR slidesehow or make a web page of LR). The original is completely unchanged and there is no export derived retouched or registration. Therefore, there is no need to separate the original and edited photo, because there is no retouched saved. Additional changes in Lightroom are managed the same, original remains unchanged, your changes are saved and there is no picture derived or recorded.

  The only time wherever you can save a copy of the picture is that if you wanted a copy for one end non-Lightroom, in which case you use file-> export... in a 'temporary' folder to a file on disk, then you use the file created for any purpose non-Lightroom you have and once completed, you can delete the file in the temporary folder knowing that LR can recreate exactly if you need it again. If you want to print from LR, LR email, or create a webpage of LR or create a slideshow of LR, you need not create a photo exported.

  Jpg and RAW, and DNG is that all treated the same to you, the user. Yes, there are internal differences that are not important to your workflow.

• Creating a new type of order in OM

  Hi you
  I need to create a new type of order in the order management.
  Once the order is booked, the inventory must decrease automatically without going through the "release Sales Orders', the 'Transact move orders' and 'shipping Transactions.
  After the closure of the State of the line, I can generate the invoice for the order through the program master autoinvoice on receivables.
  Can someone explain to me how to create such a command?
  Thank you.
  
  Kind regards
  Mustapha.

  Your condition looks good with the behavior of the stream line Bill only with the Interface of the inventory.
  just create a normal header and transaction type of line and when assigning the flow line to the header, choose 'flow line - generic, Bill only with the inventory Interface' flow.
  This should get your order related to interface autoinvoice table and important operations interface.
  Make sure that you enable your material handler Interface to inventory transaction manager to reduce the quantity in stock

  Thank you

• Creating a new type of order

  Hi you
  I need to create a new type of order in the order management.
  Once the command type is reserved, the inventory is expected to decrease automatically and invoice can be created using the program master autoinvoice claims.
  Can someone help me how to do?
  THX.
  
  Kind regards
  Mustapha
  
  Published by: user10619126 on August 20, 2009 22:50
  
  Published by: user10619126 on August 20, 2009 22:51

  Please follow these steps:
  -Set up a transaction type of line
  -Set up a transaction type of header with a stream of realization as "Order Flow" - generic. Complete price list, the operation of line type defined in the previous step
  -In the transaction of the header, type assign line rate as "line flow - generic, Bill only with the Interface of inventory".
  As soon as the order is the line book rate trigger interface of invoice for the line of SO.

  -Create the sequence of documents for the type of transaction header
  -Assign the document for the type of transaction header
  -Create a command using the TT header and add a line for a storable element. Here, it should be noted that according to the type of control used, as appropriate, following should decide.

  _If the question isn't under control of review/batch/Locator, enter in the subinventory on line (Shipping tab > menu file > show field). If the item is under review/batch/Locator control, use the booking form to book it first (Tools menu > Scheduling > booking details) _.
  -Book order
  -Query the command and check the status of the line. Normally it should be filled as "Bill Interface - Line" is postponed.

  -In INV, check that there is no current record in the Interface open transactions (INV > Transactions > open transaction Interface). Query using error in the vacuum indicator and the adequacy of the Organization Code. Can use dates as well

  -If records in open transaction Interface with status as "Background" then in INV make sure that this ' important ' Manager is active (INV > Setup > Transactions > Management Interface). Otherwise, you need to run the "important Operation" in the Tools menu to make it active.
  -INV "Meaningful Transactions" verify that the transaction number of the sales order was created
  -AR use automotive invoice to create the invoice.

  Thank you
  'Ve

• Need for iTunes Apple music?

  Need for iTunes Apple music?  Must I pay for the Apple's music run my iTunes now? Can I access, browse and download movies and music without the Apple music subscription?  I only asked because I was given a sound of music Apple upward when I tried to download a movie.

  Hello

  # Apple's music is not necessary. You can always buy music and videos on iTunes Store as before. Try going into Preferences > restriction and check Apple music.

  Jim