new window of the observer do not sync

Hi all

small question: I created a new window of the observer, after having blocked my original, fashion side by side (change this look here). But generally, these two windows are synchronized at the same place in the timeline - in other words sync to eachother, and somehow the two windows are not synchronized

what hurts?

Thank you very much!

the love of my life

You simply cause a logical paradox using your model several times with time lag. There is no way for the model nested to actually know which instance you want to address in the parent model. It only works the other way around in your case. No need to spend the spectators, although in your example, there is no reason at all to use ETLAT due to the way that you do.

Mylenium

Tags: After Effects

Similar Questions

  • Why the clip will not play in the window of the observer?

    Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

    You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

    Russ

  • New windows created by links start not maximized

    37.0.1 on Windows 7 x 64, but this problem is currently using Firefox for a long time.

    When you click a link that opens a new window (IE a link using target = "_blank") the new window opens not maximized. For example on the http://www.protodave.com/tools/verifying-a-dkim-txt-record-and-key-length/ page when you click on the link "DKIM Key Checker" it opens the target page in a new window. The window opens not maximized. I currently Firefox custom displaying the bar title and Menu bar and I did not "open new windows in a new tab instead" checked.

    There is a workaround for this problem and that is to turn off the title bar in the Customize menu. When the title bar is not enabled then new windows properly open enlarged. The fact that Firefox causes the behavior expected when default mode as unwanted in the title-bar-enabled state title non-barre and reporting product behavior leads me to believe this is a bug or (hopefully) an obscure about: config option I was able to present descry.

    I prefer the active title bar and so I just live with the question, but it's no doubt aggravating. Help, please.

    Shift + click should open a window that has the same size of the window the link was clicked in.

    However, in Windows, if you move the window to the top right, it will automatically maximize (something to consider as a work around in the meantime)

    This issue is being tracked in bug 1005098, however there is no ETA when it will be worked on. It is proposed in the 38, but not implemented.

  • Open a new window of the browser always puts an FLV (0bytes of a youtube vid) previously seen on the desktop. 18.02 Firefox

    Open a new window of the browser always puts an FLV (0bytes of a youtube vid) previously seen on the desktop. 18.02 Firefox

    seen the vid yuotube yesterday. delete all the flv on the desktop.
    even today, a new window always puts the same empty file from yesterday.

    any suggestions?

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

  • I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    Copy the contents of the cd in a desktop directory.  install from this directory.

    or

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Code zero how temporal in the window of the observer?

    I need a way to reset or equal to zero the time code of clips I open in the window of the observer and do not use the initial timecode for clips. Is it possible to use just a simple counter in the window of the observer?

    Thanks for any help.

    In the preferences under

  • 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

    13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • How to open a new window to the same URL?

    When I click CTRL + N to open a new WINDOW, is it possible to open the new window to the SAME URL than the one I was on (instead of opening my homepage)?

    You can tear off a tab in a new window by dragging the tab slightly down, but who will remove the tab of the active window.

    You can watch this extension:

  • How can I get a query in the search field to open in a new tab or a new window, and the current window?

    How can I get a query in the search field to open in a new tab or a new window, and the current window?

    If you are looking through the search bar in the Navigation toolbar, this preference can be changed to research it open in a tab.

    Type of topic: config in the address bar and press ENTER. Then answer "I'll be careful." Type this pref in the search at the top.

    Browser.Search.openintab = double click to switch to true

  • How to set up the 'new window' tab to open the new window as the same page

    How to configure the tab 'new window' to open the new window on the same page?

    Clone of extension of the window - will also Clone a tab:

    http://www.Pikey.me.UK/Mozilla/?addon=CW

    Clones the current tab's address and history into a new window when the New Window command is used (and optionally into a new tab when the New Tab command is used).

    Compatible with Firefox 9.0. *

  • How can I open a new window without the current tabs being replicated?

    I have a window open with several tabs. I open a new window and the current tabs are replicated - I'm waiting for the new window empty - what am I doing wrong? Should what settings I change. I'm running Firefox on a MacBook Pro with Snow Leopard OS.

    This has happened

    Each time Firefox opened

    Firefox support Home page (s) by default in a new window.
    If you see something else, then check your extensions (Tools > Modules > Extensions) to see if one of them is the cause.
    See Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems

    How to open this new window?

  • System Restore: after rebooting, the prompt window, says the system could not be restored.

    System Restore:

    All the points are there and trys to restore systems and restarts the restore. After the reboot, the prompt window, says the system could not be restored. Any suggestions?

    Hello

    There are a variety of reasons for system restore problems

    Norton and Norton product Tamper Protection is the main

    Read about it:

    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    You can try restoring the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and malware can interfere with the restoration of the system

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  • Where can I install Windows Live - the email client, not the e-mail service?

    I had a problem or two with my emails, as shown in this forum. A good piece of advice, it's that I should install Windows Live, the mail client (not Windows Live Mail, the mail service.

    I looked up and down on Ms sites - none other than the basics, including Livemail.

    I found it on File Hippo and Cnet, but both want to install additional software to speed up the download. I had problem with one of these programs a year back and I'm happy to wait as long as it takes to download it.

    -Can anyone tell me the MS page so that I can download the Windows Live Mail client please?

    It is part of the essential elements of Windows, but you don't have to download anything.
     
     

    FYI: Windows Live Mail help is in this forum
    http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

  • I want to use Windows 7, the computer will not accept my 25 digit product code please help

    I want to use Windows 7, the computer will not accept my 25 digit product code - please help.
     

    How to activate Windows 7 or Vista manually (activate by phone)
    http://support.Microsoft.com/kb/950929/en-us

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    http://support.Microsoft.com/?kbid=326851
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    ----------------------------  Alternatives -------------------------------------

    To enable the use of the phone

    1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
    then by clicking on activate Windows now. ?

    2. click on show me other ways to activate.

    3 type your Windows 7 product key, and then click Next.

    4. click on use the automated telephone and then click Next.
    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    5. click on the location nearest you from the drop-down list, and then click Next.

    6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

    7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

    8 Note the confirmation ID the phone system gives you.

    9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

    10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

    How to contact a Microsoft Product Activation Center by phone
    http://support.Microsoft.com/kb/950929

    Microsoft Activation centers worldwide telephone numbers:
    http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

    Register Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/help/register
    Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
    filled with tips, creative tips and other information to you help get the most out of Windows 7.
    You also get a subscription to the monthly newsletter of Windows Explorer,
    where you will find other tips and tricks, as well as special offers.

    Learn about Activation:
    http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

    J W Stuart: http://www.pagestart.com

  • on windows xp, my system restore to a previous restore point. have you tried many restore points & creating new ones but the system does not restore. all the solutions out there?

    on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.

    Let see... What do we know about your system environment:

    It's windows xp.

    If we knew more, you would probably now.

    What is the problem that you are experiencing this thing you System Restore will be remedied?  System Restore is not a time machine.

    The system restore already worked successfully in the past?

    Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
    For example, if you use Norton/Symantec products, you will see a message like this:
    Restoration incomplete. Your computer cannot be restored...
    It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
    According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
    Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
    System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
    That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
    Give these ideas some consideration if they apply to you.
    Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
    No matter what you use for protection against malware, I do so and then only begin to solve any problems:
    Download, install, update and do a full scan with these free malware detection programs can solve any problems:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    It can be uninstalled later if you wish.
    The scans by operating clean, reboot, test and we can fix any other issues.

Maybe you are looking for