Newbie: OCD and list of build issues

Similar Questions

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• LIST OF KNOWN ISSUES FOR INDESIGN CC?

  I have CS3 and CS6 and also creative cloud.  Things that work on older programs do not work on the CC and I hesitate to upgrade my other computers.  Is there a list of known issues for CC?   (my preferences of color and thickness turn against zero when I do the lines and boxes).

  Hello

  This might help: http://indesignsecrets.com/avoiding-problems-installing-indesign-cc-2015.php

  Kind regards

  Sheena

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• My laptop displays connect to WIFI but doesn't connect and lists of unidentified network

  I use Vista on my laptop and recently changed my Netgear WIFI bridge.  I added the bridge, but when I go to connect it says connected but not connecting, and lists of Undentified Network.  I googled this problem and cannot find a solution.

  Hello

  1. you get any error message?

  Please follow the steps from the link below.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also check out the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

• SMS said "could not send" and list of clear rest 5.1.1 conversion 23.4.A.1.232

  When I try to send text messages, press the button send, it says "could not send" and list conversion remains clear!

  Updated since 4.4.4 to 5.1.1 23.0.1.a.5.77 23.4.A.1.232 - r8c.
  SmsBackupAndRestore uninstalled and disabled Delivery Report but no help.

  Sorry, I missed that.

  As it happens also in safe mode, something can happen with software phones when the phone has been updated.

  I recommend that make you a backup of all data in the phone, you need to register and you perform a repair of software using PC Companion. You have this option under the support area-> software update-> telephone repair.

  After the repair, please check if you can send a text message before restoring the backup.

• Hide: I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now!

  I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now! Anyone know where are the hidden files?

  Go to start / Control Panel / folder Options / view and check the box to show the hidden files and folders and uncheck to hide extensions of known file types.  Only the first is required for this problem, but the other may be useful later and you might as well do it while you're already here.

  Now, you will be able to see the folder.  It will be in the same place, it has always been (it has not been assigned) - it was just hidden and now that you can see hidden files and folders you can see again.  You may notice that it deteriorated a little bit lighter that other records - it is a sign that it is a hidden file or folder.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How bundle touch and non touch build for same OS version (5.0) for appworld

  Hi all

  I'm new in Appworld applications filed, please help me...

  How to package touch and non touch build for same OS version (5.0) for appworld?

  Thank you.

  Alaka

  
  

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  Are you referring to the widgets etc that you have added to pages or the actual interface of Muse?

  If it's things on the page then you most likely have an empty element above them. Do a select on your page and make sure that there are no elements that overlap your clickable items. Also make sure your clickable items are highest in your layers panel.

• Need to hide options "filter, search and list of exports.

  Hi, we can hide the filter, search and list export options in the user interface. Please see the summary below.

  

  You cannot change the user interface for existing objects of vSphere.

  You do not have your own list of objects in support of these options:

  -Sort and export icons will not be displayed if you specify no sortProperty or exportProperty in your list of ColumnDataSourceInfo.

  -The filter box will always be there but will be inactive if your data provider does not support a node PropertyConstraint with Comparator.TEXTUALLY_MATCHES (see example of frame-app)

• Can we have hash partition and list on 2 columns in the same table. How.

  Can we have hash partition and list on 2 columns in the same table. How.
  
  Work on 10g release 2

  # List-Hash is a valid composite partitioning strategy 11 from g.

• OCD and footers do not correctly generate in print output

  I use RH8. Until yesterday, was able to generate output .doc fine. We usually run a macro to clean the OCD and footers. Yesterday I had to update an older help created in RH4W file. I made my changes, closed RH4W and returned to work in RH8. My .chms generate very well. This is my file .doc on paper which translates as no creation of OCD or footer.

  Here's what looks like one of the footers and the table of contents. If anyone can offer any suggestions (I am at a loss - even removed the ssl and started from scratch), I would be grateful.

  

  

  The problem is in your Word settings, not RoboHelp. It seems that you have configured to display Word field codes.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Issue: Photoshop 13 caution repeat the update and list completed

  Adobe Photoshop 13 keeps repeating that I have an update and after download says "complete", but then immediately pops up again.

  Moving to Photoshop Elements

• Blurry text "BOLD" in the list of messages not read and Board calendar and list files

  After the update of TB to 38.2.0 "BOLD" of fonts on the Panel with the list of folders, unread messages appear in bold in the list of received messages and all text with a font in bold in the calendar Panel has become blurred and almost unreadable. All the solutions proposed in the branch with the similar issue 4 months ago were not useful. Someone knows how to fix this?

  Two questions you can answer:

  (a) what version do you use?

  (b) there is a definition of the 'hardware acceleration' options | Advanced | General - what happens if you reverse this check box (if it is the turn it, if it is off turn it)?