Newbie question: I can save the conversation in MP3

Similar Questions

• You can save the music from itunes with the sound recorder?

  You can save the music from itunes with the sound recorder?

  The principle is simple in nature, although the tape recorder is not the best option available for you, even in free software for audio recording you can.

  If you want to use sound recorder, you will need to get a 1/8 inch male-male stero (cable basically a helmet with two male ends) and put one of your speakers into your microphone in the port (line in).

  Then open sound recorder and give it a shot. The recorded files will be in .wav format, so you need to get a freeware to convert to program them to .mp3 if necessary. Or use this:

  http://www.media-convert.com/

  You can also use Windows Media Encoder 9, which in my opinion is much better in features and maintaining the quality. It is freely accessible to the public.

  http://www.Microsoft.com/downloads/details.aspx?FamilyID=5691ba02-e496-465a-bba9-b2f1182cdf24&displaylang=en

  You use the same configuration that with tape recorder, get a stereo cable and speaker output connection > microphone.

• Feed the latent demand can increase the conversion of qualified prospects?

  Hello

  Feed the latent demand can increase the conversion of qualified prospects.

  Thank you

  Hello

  Yes of course...

  Thank you

• All of a sudden I can't type data on registered forms. The purple bar above shows "Please fill out the following form. "You can save the data entered in this for."

  All of a sudden, I can't type data on registered forms. The purple bar above shows "Please fill out the following form. You can save the data entered in the form.

  Program used to complete the form (I guess they are in PDF format)? OPERATING SYSTEM? Versions of both? Forms were filled before you save them?

• is that you can save the files to your document to your ipads storage cloud in adobe reader software?

  is that you can save the files to document to the storage of ipad cloud in adobe acrobat reader is?

  Hello

  You may want to take a look at the options that I have provided here: How can I copy a file in the cloud to document local Adobe on my iOS device?

  Thank you

  Abhishek

• How do I cancel recording a serial number after that my computer crashed, so that I can save the program to a new computer?

  How do I cancel recording a serial number after that my computer crashed, so that I can save the program to a new computer?

  you are allowed to two activations then just start your installation on your computer 2.

  If you see an error of account activation, (and it's actually your 3rd activation), contact support adobe technique and request an activation account reset, http://helpx.adobe.com/x-productkb/global/service1.html

• Newbie question: how to display the logo of the company for all applications

  Hi all:
  
  I am new to APEX and in the thorough step 'Application two days Express Developer's Guide.
  
  I have Oracle XE with APEX 3.1.2 installed.
  
  I have a file called test.gif stored on my C:\logo\test.gif logo
  
  The question is what is the step to display this logo on all pages for each application (I could build applications in the same workspace, and I like the same logo to all pages for each display application).
  
  I have extensive air manual and this forum and cannot always understand.
  
  Here is what I tried:
  
  -Click on an app that I created in Application Builder
  -Click on "shared components".
  -Files-click == > Images and upload my C:\logo directory test.gif
  -Return to page 'Components of the part' == > Logo and select / access to the following values:
  > logo type: image
  > logo: /i/test.gif
  > logo attribute: width = "100" height = "20" alt = "Company Logo".
  
  Save the changes. When I run my application, the company logo displayed as 'x' icon.
  
  A I missed something?
  
  
  Thank you!
  
  Kevin

  Kevin,

  You wanted a step by step so that is.

  You must first download your logo to your workspace file. Then you can assign it as a logo, so this step appears on all pages.

  Before you start, I suggest that ensure you that your graphic file name does not include the spaces inside. Replace spaces by dashes, underscore or squish traits it.

  1. application Builder-> shared-> files components-> Images.

  2. click on the create button.

  3. application for leave "No Application associated with" value, provide the specification of file, then click on the download button. When it's done, copy the name of the file (for example MyFile.gif).

  4. go into the Application Builder-> shared-> Application-> definition components

  5 scroll down the page to the section Logo and set the Type of Logo Image.

  6 Logo, enter ' #WORKSPACE_IMAGES # ' follow-up of your files.

  for example #WORKSPACE_IMAGES #MyFile.gif

  7. Optionally, you can set the attributes of the Logo, for example, by specifying the height and width to display your image.

  8. click on apply changes.

  9. run app.

  If you have the right to file specification, you should see your logo in the upper left corner. If you want elsewhere, you have to change the page template, which is way beyond the scope of this forum and the tutorial. :-)

  Good luck

  Stew

  p.s. If it works for you, please give points for correct answer at the top of this topic.

• where favorites are saved so that I can save the file?

  in IE8, I could save my favorites in case I needed to recharge the system. I wish I could back up my bookmarks Firefox in the same way.

  Go to help > troubleshooting information, and then click Open containing folder. Which will open Windows Explorer in your Firefox profile.

  You can then see the places.sqlite file that you can save with Firefox closed.

  There are also automated under the bookmarkbackups folder backups.

  Finally, you can export your favorites through the Firefox UI: https://support.mozilla.com/en-US/kb/Backing+up+and+restoring+bookmarks#Manual_backup

• WinXP is frozen (hourglass) and I got 20 instantiations of MS Paint running. I can save the pictures of MS Paint?

  Hi, I had 20 screencaps that I put in 20 instantiations of MS Paint running. Then I downloaded an independent file. Once the download is complete, the download box said he was looking for viruses (anti-virus AVG?). Then the system froze. The cursor is an hourglass. I can't click on anything to work. I tried CTRL-ALT-DEL to get the Task Manager, but the Task Manager does not come to the top. I want to know if I can put the 20 screencaps in 20 MS Paint instantiations.

  Can I make an emergency disk or thumb drive that will allow me to save files of content of each of the instantiations of MS Paint?

  If this isn't the case, MS Paint using a scratch your temporary files that it puts the content in? Could I restart the computer (power button down for 10 seconds) and find files scratch 20 who used each MS Paint and save them in a regular file?

  Any help would be greatly appreciated.

  TIA, Paul

  Hello

  You must save the MS paint files manually if not you will lose all files that you have not saved since MS paint does not automatically save files. Once the files are lost, you can retrieve them.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• I can save the layout of a table?

  I am using Hyperion Intelligence Explorer 8.3 on Windows XP/SP3.
  There is a section of a report that I use I want to convert an Excel worksheet.
  I use the function insert a table. Then layout all the columns in this section.
  Then make an article of export. Which works very well.
  What slows me down, is that whenever I do that, I have to pick off all the columns in the report.
  That takes some time.
  What I was wondering if there is some way I can speed up this process.
  For example, if I could save the layout once and reuse for the future of the reports which would be wonderful.
  The columns are always the same. But maybe there is a better way to convert this
  section of Excel?
  
  Thanks for any help or suggestion!

  I'm really happy that you have a solution, you are satisfied. Sometimes it pays to be persistent :-)

• Where Cookies-Exceptions are stored so that I can save the file?

  I have access to my computer using 'Accept cookies from sites' - 'Exceptions'.

  Whenever I have reinstall FireFox, I have to manually add the sites one by one to this list of exceptions.

  If I knew what file these exceptions were stored in, I could save the file and do not have to recreate them each time.

  Thank you.

  All permissions except password exceptions are stored in permissions.sqlite in the Firefox profile folder

  The permissions.sqlite file stores exceptions allow and block for cookies, images, pop - up windows and installation of the extensions (software).

  • http://KB.mozillazine.org/Profile_backup and back up and restore the information contained in the profiles of Firefox
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Can save the configuration when running VI, but not file not when running EXE

  Hello

  I have attached a file zip containing a LabVIEW project as well as a built EXE.

  The program will load up the numerical value of the file config in both cases, but it will only write the configuration file when it is executed as a VI, not as an executable file. If I don't use the computer of JKI State, I do not think I see this problem, so I think it's the order in which the program quits? I tried to disable the Panel before closing, but that did not always help.

  Reading configuration file is made in the case of "Data - initialize" and the config file for writing in the case of 'Cleaning up' -.

  It seems that the difference between the run-time and development environment behavior is the Close event of front panel. It's in Dev mode, you do not go to the front > close State, but you don't have at run time. Try to run your cleanup command before the command close to see if that fixes it. If you close the front panel, the values could be recovered, VI OpenG has not all the values to get more because they have left the memory.

  If the Panel should be closed more quickly, but you need to hide the front panel without the closing, you can use the FP. Open invoke node with a contribution of the State of "hidden". This will hide the front panel while keeping open and then the Panel will always close end when your application terminates.

• Newbie question - need to improve the blurred logo

  I have no training in image editing, to help or information would be greatly appreciated.

  My company is trying to get some signs printed with our logo, but the only logo that we have on file is very small, so any re-sizing edges results very blurry. The image is in .png format and dimensions in pixels are by 244 489. From my understanding, this translates a picture about 1.5 "by 3", which is not nearly large enough for our needs. I have gone through the forums looking for methods to increase the resolution of the logo for printing, or to smooth out the edges (this is a pretty basic design), but I do not know what tool would be best. I'm currently downloading the trial of Photoshop to play with him, anyone have advice on where to start?

  Thanks for any help!

  Sonya

  Sonya,

  Vector illustrations are superior to raster work because it is good at any size, instead of being dependent on resolution/size (it create once and use it at any size for any purpose).

  You should take a look at Illustrator or similar application (more) especially designed for the vector illustrations.

  In all cases, there is no way to avoid re-creating the logo and this sample can be used only as a fuzzy model.

  Unless it is possible to dig up the original artwork (vector). It is a genuine attempt to find it.

  For suggestions to recreate the logo, you can display the image in the relevant forums and ask for help.

  Illustrator and Photoshop:

  http://forums.Adobe.com/community/Illustrator/illustrator_general

  http://forums.Adobe.com/community/Photoshop

• Unable to save the music sites Mp3 downloads

  Music sites MP3 downloads

  When I download mp3 the box open, save, cancel. When I hit save the box disappears. He will not go to my download folder or download.

  Hello

  ·         What browser do you use to download the mp3 files?

  ·         You have changed the location of the download files?

  If you are using Internet Explorer, the problem may occur because of faulty modules, I suggest you to run Internet Explorer (IE) in mode without modules and check if it solves the problem. Follow step 4 provided in the article below to run IE mode without modules.

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  If above method does not resolve the problem, I suggest you to reset the IE and check the issue.

• Newbie Question: Anyone can tell me whether or not these terms all refer to the same thing?

  I hear all these terms mentioned in the environment I work in.  All refer them to the same thing?

  Prodika / Oracle PLM4P / P4P / Agile PLM

  Yes still. The company was called Prodika. It was then acquired by Agile and Agile was acquired by Oracle. So we are in the Agile family of products where the name of Agile PLM, but are part of Oracle where the name Oracle PLM4P.

  P4P is just a nice TLA - acronym of three letters - that people love to use.

  In fact non of these are the official name of the product, which is:

  Oracle Agile PLM for process
  Steve