NIMAX, how to create a digital line for address GPIO

Similar Questions

• Can I create a digital line written task in another digital line written task (NOR-6723)?

  Hello! I need to build an application that follows these steps in the order shown:

  1. create a task that writes a numeric value ('1 ' or ' 0') on line1 digital to a NOR-6723;

  2. create a task that generates a clock on the same Board $line0 pulse. So, when the value of the line of $line0 has been set, a transition from '0' to '1', and then '1' back to '0' must be made on the $line0.

  So, I have the following pseudocode:

  1. create Task1

  2. create digital output channel ' Dev1/port0/line1.

  3. write bits of data ('0 ' or ' 1') on digital line1

  4. stop & erase Task1

  5. create Task2

  6. create the digital output channel ' Dev1/port0/$line0.

  7 write bit '0' on digital $line0 data

  8 write '1' on digital $line0 bit data

  9. write the data bit '0' on digital $line0

  10 stop & erase Task2

  After I stop & erase Task1 (step 4), the digital line1 remains in the State that gave step 3. But, once I created a digital channel for $line0 (step 6), line 1 is in the State of initialization (high State - because of the low pull-up), so when Task2 generates the clock on $line0 pulses, the data written bit on line1 is compromised (it will always be '1').

  My question: should I move 4 step after step 10? I mean stopping and disabling Task1 bring Task2 AFTER WHAT had been arrested and cleared?

  Is that what this ensures that value of Line1 remains unchanged until the end of the entire application (once Task2 completed)?

  Please help me!

  OK, don't know the exact calls in labwindows, is perhaps the easiest thing to create a taste of writing on the complete port.

  In this case you write every line for 8 lines of the digital port at the same time.

  Use is some form of a variable (U8) and associated function which can hide and update the bits in a number of U8

  I guess that there is a form any to make an OR operation bitwise or function AND to hide the bits of interest

  1 Create variable (U8) = b0000000

  2. create Task1

  3. create a digital output PORT ' Dev1/port0.

  Update 4 line 1 by 1 in the variable: 00000010 (this should be a routine you create - see crude example below)

  5. write variable to Dev1/port0

  Update 6 line 0 with 1 in variable: 00000011

  7 write variable to Dev1/port0

  Update 8 line 0 0 in variable: 00000010

  9 write variable Dev1/port0

  10 stop & erase Task1

  Function UpdateVariable (line; variable value)

  If line = 0 then

  If value = 0 then

  variable = variable AND b11111110

  on the other

  variable = variable OR b00000001

  otherwise if line = 1

  If value = 0 then

  variable = variable AND b11111101

  on the other

  variable = variable OR b00000010

  Hope that helps

  Katya

• How to create a horizontal line in the region of html

  Hello

  How can I create the html elements, including a horizontal line in an html area filled with items. I want to use this horizontal line to part elements optically. Moreover, my solution for now is to group the elements belonging together in a separate html area. So I have now 3 parts of html, each filled with 5 columns of elements. Is it possible to align the elements in the 3 regions (together)? Cause at the present time, only the items in each region are aligned.

  I use oracle 11 g 2 with apex 4.1

  wucis wrote:

  Apex version is 4.1

  Theme: Sapphire 17

  Page: Two level Tabs - right Sidebar (optional / based on a table)

  The region is HTML

  Main question is, how to create a horizontal line as visible separator between items.

  My personal preference would be to group the items according to the needs in the subregions and use CSS to display the Visual borders and uniform spacing of control over formatting tables.

  If however you want using HTML single region, is to create elements of the only view to the agenda of the positions of the sequence in the region where you want the jumps to appear, with the following parameters:

  Name: PX_HR_1 / / substitute suffix number and an increment of page as required

  Display in the form: Display only

  Save Session State: NO.

  Start on a new line: Yes

  Start the new field: Yes

  ColSpan: number of columns in your layout

  Label: leave blank

  Horizontal/Vertical alignment: Above

  Model: --choose a model--

  Type of source: Static assignment

  Source of value or expression:

• How to create my electronic signature for the first time

  How to create my electronic signature for the first time

  Hi debbieh62171891,

  You can fill feature & signature to create a Signature in Adobe Reader. If you want to create a Digital Signature using Adobe Reader you must then a PDF form with signature inside and drive field expanded licence fees. In this case, when you click the signature field it will take you with the process of creating a Digital Signature.

  Thank you

  Abhishek

• How to create a black line around a photo in a slideshow?

  How to create a black line around a photo in a slideshow? For this photo I made in Photoshop, but is there a way to do it in Muse so I didn't need to adapt to all images?

  

  Hello

  You can select the Image of hero and apply the stroke to the toolbar, as shown in the screenshot below.

  

  Please let me know if you are talking about something else.

  Concerning

  Vivek

• How to create a new LINE

  Hello
  
  How to create a new line in the view object to programmatically support (without using the create operation).
  give some ideas
  
  Kind regards
  Rami

  That help you

  ViewObject vo = findViewObject("YourViewObject");
  ViewObjectImpl viewObject = (ViewObjectImpl)vo;
  Row newRow = viewObject.createRow();
  // set your attribute for the new created row
  
  //...................
  viewObject.insertRow(newRow);
  

• How to create your default desktop for all / some users?

  Using Vista business I want to create a desktop computer by default for all users. How can I do this?

  I have a machine that has a dozen accounts. Can I retroactively apply this desktop computer to some existing accounts?

  Thanks for thehlp

  Joe

  Discussions on the topic "Change the profile by default in Vista"
  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/62ed66ad-71cd-43C3-83c0-5303d77176b8/
  by Heather

  "How to make a standard profile w / user by default.
  http://forums.techarena.in/Vista-Help/1065679.htm
  by Darrell Gorter [MSFT]

  How to create the default profile for Vista
  http://help.Lockergnome.com/Vista/create-Vista-default-profile--ftopict15825.html
  Darell Gorter mentioned here only taken methods supported to change the default user profile:
  "How to customize the local default user profile when you prepare a
  image of Windows Vista, Windows Server 2008, Windows XP, or Windows Server 2003"
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 959753
  but when you go on the link says the Tip system is not for Vista, on Windows Vista title is missing.

  I hope I could help

• How to create the file .bar for production mode?

  Hello

  How to create a file .bar for production mode?

  When Flash Builder, I configure my project for the mode of Production, he asks me a RIM certificate that must be registered (and then need a CSI file?). Where can I find this file?

  Thank you

  Signature of application information has not yet been published.  You can submit your application unsigned.  In addition, in FB4, in the Properties window of the project, under the Flex compiler, you can add

  -debug = false

  to compile without debugging information.

  Otherwise, .bar file creation is done in a regular compilation with BB CLI package.

• How to create the firewall rule for Windows 7 for javaw.exe?

  How to create the firewall rule for Windows 7 for javaw.exe? The application path differs from the new versions and user profiles. Is there generic symbols allowed for example asterisk?

  Hello

  I recommend you to send the request to another Department for assistance:

  Security in Windows 7

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/threads

  I hope this helps.

• How to create a file .eas for sprite sheets?

  Hello

  Does anyone know how to create a file .eas for sprite sheets.

  It looks like a data xml file that would normally correspond with a sprite sheet. I usually use automated sprite sheet software to create the xml data form. I don't see the option for .eas export file in the software of the packer of texture that I use.

  It would be convenient that Photoshop has the ability to export an eas... perhaps with a plugin.

  Thanks for your help.

  EAS file format is also a JSON format, but is specific on board animate. Currently, this spritesheet format can be generated from Flash Pro CC 2014.

  Spritesheets (image file with sprite of equal size stacked in the order) of other tools like packer of texture can also be imported in animate as the dialog box animate import Spritesheet support it. Production however you specify the rows/columns and parameters in the import of fill dialog box so that the sprites are created with precision.

  Plese do try it and let us know if it works for you.

  -Reynaud

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• How to create the new line in actionscript 3

  I have this simple script that is supposed to take a comma to separate values from xml and transform into something similar to an unordered list if only I could get a '\n' to work. Here is my script.

  var dont_forget:Array = myXML... dont_forget [n]. Split(",");

  var d: Number = dont_forget.length;

  While (d-) {}

  detailsMovieClip_mc.dont_forget.text = ">" + dont_forget [i] + "\n\r";

  trace (dont_forget [d]);

  }

  When the trace is running it shows me the values so I know they are there. However, I see that the last value. How to create a new line as a 3?

  Use the appendText method.  By assigning the text using "=" you're crushing on each pass through the loop.

  detailsMovieClip_mc.dont_forget.appendText (' > '+ dont_forget [d] + "\n\r" ');

• How to create a validation only for the lines that are created in a table

  Hi all
  
  I have a simple question. Is it possible to create a validation in a table that fires only for created?
  
  There is a possibility at the APEX 4.1 choose two types of "* execution scope *" is first of all ' * created and updated lines * "and the second is" * all subject lines. "
  
  Thanks in advance!
  
  Kind regards
  
  Jiri

  Hello Jiri,

  > Is it possible to create a validation in a table that fires only for created?

  You can still use the field lines created and updated the and use a PL/SQL Expression condition of:

  :APEX$ROW_STATUS = 'C'
  

  You will also need to change the Condition run for each line.

  It will be useful,
  Arie.

  -------------------------------------------------------
  Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.

• How to combine several digital inputs for playback?

  Hi comrade Labview users.

  I just started using LabView and I am very new to it. I know him understand how it works and you have something to work, but I need to be more effective.

  I use DIO96H - USB DAQ Measurement Computing, which includes 96 digital inputs. I use the DAQ to acquire the activations of relay and record the number of times the relays flips.

  Basically, I created a digital input read and then copy & pasted 95 times... it works but I know that's not the best way to use LabView.

  

  How can I change the digital input (Di1/1stPortA/dev0) in multiples so that it iterates through all 96 channels without copying and pasting the same pattern over and over again?

  Leon

  You have the correct polymorphic instance for playback? Once again, for the material OR it would be a NChan Read. There should be a similar choice if I remember correctly.

• How to create a digital control (of any type) which can be increased or decreased by a 'unit' at the same time?

  As in the title.  I want to create a digital control (no current limitation on its type) with a range of 1 to 10 (and a step of 1).  The only difficulty that I have, is that the user should only be able to increase or decrease 1 at any time.  Code initiated by this change of value must have completed at least once before that the value can be changed again.  This is because code of VI is mainly contained in a while loop and control are read once at each iteration and its last value should not differ more than 1.

  Is this possible with LabVIEW 6.1 and if so, how?

  One of the solutions that I came up with so far is to disable the control immediately after its reading, and to turn it on again immediately seized is read the next time (I have to assume that the user is unable to click twice before the control is disabled).  It is an acceptable method, or is there a better way?

  I also had an idea of partially disable a normal digital control, such that it could not be typed in - only arrows remained operational.  However, I'm not sure how.

  James

  Hi James,

  You can use the two buttons (by releasing latch) and a digital display that shows the current value. Button increased the value and the other decreases. Store the value in a shiftregister to work with her.

  I don't know if your solution would work because use may directly enter the new value.

  It will be useful.

  Mike