No Audio device detected received after upgrade to Vista message

Similar Questions

• No audio device detected

  I bought my second hand laptop, and there is no sound.

  When I go to my iTunes or media player a window pops up saying there is no audio device detected. I'm not very smart computer so if you can help me at all with this please post you anser in terms of can

  Thank you

  Hi rommyd,

  And what laptop you have exactly?

  Have you installed the latest driver from the official site of Toshiba?

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound after upgrade to Vista on U-series of satellite - solution

  Hi, I had the problem that I had no sound after upgrade to Vista Business.

  After several attempts to get a solution from Toshiba I found myself.

  Here are the steps to resolve this problem:

  1. update the Bios to version 3.5
  2 do a clean install of Vista
  3. install the added value of package
  4 install the audio driver
  5 install the patch "mute off".

  Should work now.

  Hey wow, it's really nice. Already bookmarked it. :)

  We users and me (freak ;)) appreciate good solutions.

  THX dude

• Monitor HP w2338h area shrank after upgrade to vista 64 to 7

  Monitor HP w2338h area decreased by 3/4 in both sides, & 1/2 upstairs and downstairs after upgrade from vista to 7 settings I tried solving max on HP Pavilion a6857c please advise, I rebooted as the drivers for my video card an ATI Radoen HD 5450 and all updates for windows 7 home Premeium 64 bits & HP updates

  I rechecked the ATI Catalyst control Center and found that I could adjust the scaling and fixed the ProblemPlease share with anyone with a problem out

• No sound after upgrade to vista full Qosmio G30-195

  Hello

  I did everything possible, downloaded Update got all drivers in place, yet the SIGMATEL HD DRIVER load well, but I have no sound, I see all this work, but there is no sound.
  How could it, some say that his incompetence of vista... say yes I should get a computer laptop nother

  Please any help or trouble...

  Hello

  Because you wrote here already the third time I tested the new installation of Vista on Qosmio G30-126, but the same PQG32E like yours.

  I installed Vista ultimate and the sound works without installing the audio driver. Anyway to install sigmatel audio driver. Please after installation of Vista install package of added value in a first time. After doing this installation:
  -display driver,
  -driver sound,
  -Synaptics TouchPad Driver
  -Software Modem and so on.

  I hope that everything will be OK.

  Bye and good luck!

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

  Hello

  I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

  Any ideas?

  Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
  Then please provide more details on your laptop!

  I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

  After a long investigation, I found a solution here in the forum.
  First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
  Be sure to use the RIGHT driver sound after the new installation of Vista.
  Not all drivers are working!

• Audio does not work after upgrade Windows 10 (Lenovo G780)

  After my upgrade to Windows 10 on my Lenovo G780, it seems that my audio no longer works. I tried plugging my headphones as well to see if I had audio coming through here, but it does not appear in the peripheral reading window when it is plugged.

  The laptop comes with Conexant SmartAudio HD and lists also high definition Audio device in Device Manager.

  Could someone help me and let me know if there is a problem that I monitor.

  I found a page that contains some Conexant software for windows 10 but I don't know if they are updated drivers or if they support even my machine (the page does not support for G780 list).

  Any help would be appreciated. Thank you.

  After a few tries, I finally got my audio to work and hope it does for you too. What I did close my computer completely as opposed to stopping in the hybrid stop mode. To stop your computer completely, right click on the Windows Start icon and scroll down until closing or disconnect and select stop down in the list. Your computer shuts down completely. Turn on your computer again (start will take a little longer than usual) and check if everything is in order.

  As I mentioned earlier, my audio back after doing this. It will be useful.

• Motherboard integrated audio device missing randomly after turning on the computer.

  Hello

  Old location:

  I recently changed my laptop Elitebook 2540p motherboard. When I installed windows 7 Enterprise 64-bit on my computer the computer lists not all audio devices in the Device Manager page. I checked the bios for all faulty settings and they are all good. Theres no yellow mark in the list of devices is and all the drivers appear to be installed.

  New location:

  Installed windows 7 and computer again found / installed normally audio devices. I tested computer for hours to read the audio data from it and everything worked well. I restarted computer several times / re installed the battery on the computer. A reboot the computers audio button mute fast under the screen seems to be orange and the speaker sound in windows icon has been marked as X I have check the list of devices in Device Manager and there is no audio device listed (no sound device at all). Once I restarted computer and before the computer started downloading windows I pressed the mute button and it turned blue. Then I went to windows and audio devices / audio devices has been registered and work / sound working again.

  Old location:

  I have motherboard integrated IDT audio device.

  When I try to install audio drivers from hp for 2540p site I get "your system does not have the minimum requirements for this patch." And the Device Manager does not list all IDT audio devices.

  I then installed xp, computer peripheral audio IDT normally found and sounds work properly.

  New location:

  After I made the new windows 7 install and all my audio drivers installed / devices showed in the list of devices / audio worked / I downloaded sound drivers driver HP site and install them to the computer.

  Audio problems has not appeared again after my screen mute button HP turned to orange / speaker Windows sound was marked as X / computer didn t found no audio device.

  Currently waiting if the problem happens again and try to think what would cause this (hardware or software problem)? And how to solve this problem permanently.
  

  UPDATE: I have fully charged battery / computer was off while what to do and the problem came back. Mute button fast turned to orange. No audio devices and speakers marked as x. "No audio device installed".
  

  I then installed USB headset and the computer recognizes the and the sounds are use of usb device. Theres still no IDT audio device, shown in Device Manager. Only usb headset work.
  

  Any help for this problem?
  

  -BIOS is updated to the latest version of the HP driver download center.

  -All windows drivers are installed.

  -Bios configured correctly.

  -Reassembled the motherboard and tested all the cables are correctly placed.

  EliteBook 2540p

  Windows 7 Enterprise 64-bit

  Motherboard Info: VB841AV product number

  Product model BU RCTO i7-640LM Mfdf 2540p

  598762-001 MB SYS W/PROC CORE 2 DUO 2.13 GHZ

  P.S. This thread was moved from the company - Compaq, Elite, Pro for laptop - PC Compaq HP ProBook, EliteBook, slate/Tablet PC, Armada, LTE. -Hp moderator of the Forum

  After change of motherboard second the audio computer´s worked well and the audio devices never disappeared from the computer. The first new motherboad that I had and I changed had broken the IDT audio chip.

• No audio device detected Qosmio X 500

  Hello
  I'm new on this forgiving so if I make a mistake. I have some problems with my Qosmio X 500. Recently, there is a red cross next to the speaker in my taskbar. Whem hovering the mouse over it, it says no speakers or headphones connected.

  When right click on detection of problems, it is said that no audio device is connected. In my windows Device Manager it says that everything is connected OK I also downloaded the latest Audio drivers (conexant). Uninstalled the 'old', restart the computer and installed the new. No solution.

  I found on the internet, it is one common problem with other laptops Toshiba, but no solutions have been proposed.

  Help, please.
  Another thing I noticed is that video streamin (Youtube, for example) is suddenly very slow and laggy. Play reviews are no problem.

  Hello

  I put t think that your speakers are silent because in this case the crossed red circle would be visible in the taskbar you said you see a red x so I guess there is a software problem.

  I found a tip useful and interesting to the Microsoft page:
  [On the volume of the taskbar icon shows the Red Cross. Trouble shoot bugs but keeps showing on and off. http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-sound/on-taskbar-volume-icon-shows-Red-Cross-trouble/5f3906da-4d36-44c8-8b39-9884415ce22c?msgId=d7ff90e1-b836-4b71-88de-a4d349bc2136]

  Please check that and post comments

• Vista Home Premium; "no audio device is installed" after update Realtek.

  Hello

  I recently updated the driver from myRealtek, and after reboot as recommended, I got a red X on my sound icon and the message "no audio device is installed" under the sound engineer. Realtek and Unimodem drivers audio show that they work and I uninstalled both and reinstalled the latest versions and then uninstalled and reinstalled the original ones that came on the computer, but nothing has worked. I stopped, started and restarted Windows Audio and tried restoring the system (without success) and recovery of driver (would be successful) but I have still no sound.

  I run Vista Home Premium, 32-bit, Service Pack 1 on a HP Pavilion dv6648se.

  Ideas, suggestions or comments would be appreciated, I'm starting to think that I might have to perform a full recovery of the system. Thanks in advance!

  ~ Xyli

  Hello

  The main thing is the driver version in Device Manager - the same as that of its
  you installed - you run the driver - restart until it is - you must do it manually and not use the
  Updated driver (more than initially) and not to use the restoration in the Device Manager. Also check doubke
  you actually have the appropriate driver.

  Check/settings (BIOS/CMOS) as you start screen - often F2 shows you start for the keys. Do
  its edge is activated,

  If you can not do work check with HP Support and forums for known issues. Or take to a real
  computer store (not the leeks and the glances at a BestBuy or other BigBox stores).

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  You can also disable the sound board and use a USB sound card that is not expensive.
  Rob - bicycle - Mark Twain said it is good.

• Error "no audio device not found" after installing Windows 7

  Original title: no sound
  
  After you have installed windows 7 ultimate in my dell latitude d610, I have no sound. What should I do? He always tells me no audio device found

  No sound

  (1) have you installed the latest audio drivers? If not download them from the manufacturers website or try to run Windows Update - which could include the generic drivers for your audio device.

  (2) you have the right sound device? Click Start, type: sound. Under control panel, and then click sound. Then set the audio device by default.

  More options:

  (3) is the disabled audio device?
  A. right click on the speaker on your taskbar icon
  B. Select "playback devices".
  C. in the white space and blank, right click and select both show disconnected devices / people with disabilities
  D. do you see icons for your speakers and headphones now?
  E. Si you see now you may need to right-click on the correct audio device, and then select "set as default device".

  (4) you can also try the troubleshooter below to discover the connection issues that may exist, the instructions are below:
  A. click on 'Start' > select 'control panel '.
  B. Type of troubleshooting in the top-right search field > select "troubleshooting."
  C. click "Hardware and sound" > select "play Audio".

  (5) also pass through the steps mentioned in the article below - tips to fix common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  This message may also help:

  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/c0f92662-f792-4e4e-B24B-2fae1e52eb7c

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• HP ENVY m6-1125dx Notebook PC: "no audio device is installed" after refresh. (No sound)

  Hi, I've recently refreshed my laptop. It was a horrible mistake. All my documents remained where they were, but all my applications have been erased. I had to redownload mozilla firefox, google chrome, microsoft office, HP cool sense, Adobe and many many more. I'm drawn to believe that this update also affects my sounds. I lost him. I tried to solve this problem and discovered "no audio device is installed". I also lost my control panel of beats (my laptop came with audio of the beast). I went to redownload this on the site of HP but he said that there is no update or downloads for my device because everything was already up to date. I tried to download the drivers, but this was not good. Why a driver would help me a device that apparently is not yet installed.

  Need help! Help, please.

  -A

  Thanks guys, but I solved the problem. When I went to the HP support page to download my audio driver, he told me that everything was up-to-date. It's because I entered my operating system like Windows 10. When I said that my operating system is Windows 8.1, it gave me a list of drivers so I can install it. Even if it wasn't under my operating system (Windows, 10), I was able to download drivers for my laptop that is operational. I downloaded the correct driver for my audio devices that solved the problem.

  Thanks anyway,

  -A