No audio track in the Timeline

Similar Questions

• Cannot delete the audio track in the timeline

  Hi all

  Here's my problem: it is not the first time it happens, but to excerpts from different cameras, I'm completely unable to abandon the audio track.
  In the source Panel the playbacks of normally with audio clips, but when it comes to insert the clip it does not work as if I'm falling all audio and video clip he simply inserts the video and if I try to drop just the audio it don't let me down anywhere.
  Has happened on multiple devices and just on the first CC (I decided to switch to CS5 and I'm already regretting)
  I tried to import the file in different ways (by drag/import/media browser), restarts first and pc and transcoding of other codecs, nothing works.

  Anyone has any suggestions or has encountered the same problem?

  
  See you soon

  A

  Hi Andrea,

  I'm completely unable to abandon the audio track.

  Try making sure that the source of A1 is connected to the A1 channel in the timeline panel, and then drag. More information: https://forums.adobe.com/thread/878527

  Thank you

  Kevin

• Problem inserting audio track in the timeline

  Sorry, I'm a newbie and I'm sure this is a stupid question - but I can't answer myself.

  In collaboration with the latest update of Windows CS6 and 1080/60 p video from my Panasonic AVCHD camcorder, I find that the only way I can move a clip to the Source the timeline monitor is drag-and - drop.  Any other method (by clicking on the icon "insert", keyboard shortcuts) moves only the video, leaving behind the audio.

  What I'm doing wrong, or what I understand?

  Check your targeting and patching for audio tracks.

• MPEG Gets an audio track in the timeline truncated

  I havean mpeg produced in Adobe Media encoder (of creation).

  Plays and out very well until it is placed in a timeline yet and the audio is cut to about 80% of the video.

  for example the track audio and video match lengths visually when I drag in the file mpeg... until I release the mouse button.  Then the audio track truncates.

  Duration MPEG = 1.20mins

  Thoughts people?

  Your multiplexer should read none.

  Better to use two files.

• What's UP with the audio tracks on the timeline?

  I'm faithful user of Final Cut Pro, but I had to order a Windows compatible software for video editing for work, so I'm Adobe Premiere CS4 (I couldn't download CS5 on my computer because it's apparently a system of 32 bytes, not a 64... go figure). And I add the titles to the audio section of my first project and I noticed that he was going to let me NOT move my pieces anywhere I want on the timeline. He mixes them all the way up to the similar Audio track 5 automatically instead of track 1 (unlike the video that it is connected to is on track 1). I find it's confusing. I've read about it and this is apparently because the tracks automatically arrange them according to the type of audio, they are (mono, stereo, 5.1). So I thought OK, it is illogical, but I'll change them. Alas, I have not yet found a way to change the type of audio tracks to ask here. It's the first buffet. How can I change this?

  The second thing I have is that I have a mono track that only play on a player, of course. In Final Cut Pro, you have a few options to change it and it is easy. This program, I can't find a way to solve this problem either in the program itself or on the web. How can I change a mono, track to a stereo speaker, two channels of the speaker?

  Any help would be better appreciated.

  Q1: http://www.video2brain.com/en/videos-4009.htm

  Q2: I can usually hear mono files on two speakers. Maybe it's a file of two channels with only one filled channel. If so, use the effect of audio complete left or right.

  Welcome to the forum.

• Invisible audio tracks in the timeline

  I worked on a video clip, so I have several video clips in my calendar, but I découplez their audio original and deleted thereafter audio tracks, to which they were assigned. The audio track only I kept is the original mp3 that I use. This has been inserted on the audio track named "Soundtrack. For some reason, this path is no longer visible on my calendar. My video tracks 1 to 7 are visible, but the tracks without audio, whether. I hear very well and adjust it in the audio mixer Panel, but I can't. No idea how to get it back?

  NB: When I create a project or a new sequence, the audio tracks are visible as usual. But not in the sequence, I'm working on. Also, if I add a new video clip with audio attached, I can preview the video and hear the sound, but even once - the audio track is not visible on the timeline. Help, please! It is very annoying...

  See how there's a slightly darker grey bar right under the video 1 track, all the way through the mounting Panel? Hover over that until you get a pointer arrow double-headed, pointing up and down with a 'sandwich' between them. Click and drag to the top.

• Cannot save an audio track in the timeline

  I have opened in PP CS4 audio mixer and can only successfully save a voice more if I move to outside the end of the timeline. Trying to record to an unused track where there are video tracks above results in no - no audio track is created.

  What I am doing wrong?

  THX.

  No, it's really very simple.

  Target/select the desired range. Position the CTI as you wish. Tap the microphone icon in the Audio Mixer Panel, ensure that the correct source is selected, and press Play. Personally, I will monitor through headphones or cut all other Audio tracks.

  Now, I always create a new Audio track (add tracks) and rename to Narration, so I know that I don't have anything on the track.

  You are not trying to burn to a mixture under are you?

  Also, make sure that your WAB (work area bar) covers the entire timeline. Hit the------[backslash key] to zoom out, look at the WAB and find the little square in the middle. DBL click on which develop to cover 100% of the timeline.

  Good luck

  Hunt

• help with source audio tracks in the timeline.

  Why do I get the 8 audio tracks when I insert a clip of my source window on my calendar, when I preset my calendar for only 4 audio tracks

  If your video clips have 8 audio tracks the chronology will add the additional track to make all clean. If your right click an item in the project pane and select Modify/channel audio, you can change the audio configuration.

  

• How can I add more than 2 audio tracks on the same blade?

  Well, I'm just trying to include more than 2 audio tracks on the timeline. The audio tracks to be included in the project are around 10, but whenever I simply drag and drop a new track on this specific slide, which already has 2 (1 said track 1 (music video) and the other just track 3) I get a message asking me if I want to change the audio for this slide. Help!

  Hello

  Any individual slide can have only one "track". This is normally where will the audio narration. But if you want more than one audio clip to play, you can get there by inserting an object such as a box to highlight, configure it as basically invisible by setting alpha good value and cerebrovascular accident. Then by adding audio to the highlight box.

  Add a second box to highlight if you want a third clip to play. Repeat if necessary.

  See you soon... Rick

• Replace audio tracks in a timeline

  Hi all.

  It's actually a little embarrassing, but here goes:

  I did a rough cut of a source material with 4 audio channels, channels 1-2 with audio of the environment and the 3-4 with interview audio.

  Me being stupid, I did not allow the second audio track on the timeline on which clips where going, therefore, I have a timeline with only the audio of the environment, but no voice.

  Is there an automated way to replace the tracks? Edit done in cs6.

  Best regards, Norway.

  I found the solution for my self.

  Mark all clips with bad audio channels. Press "Clip" on the bar menu above, edit > Audio channels and make replacement in the dialog box that opens.

• How to reset the function that allows tracks audio and video to align with the other tracks on the timeline

  Somehow, I have disabled the feature that allows to drag and draw audio and video tracks on the timeline to other titles or positions of import.  Is the only project that was hit, and everything that I can think is that when executing some other keyboard shortcuts, I accidentally performed a shortcut that turned this feature off.

  You want to say, "Snap"? Press "on the keyboard, or press the snap button in the timeline panel.

• Importing video files WITHOUT audio track despite the source with audio

  Sigh. Back with another ridiculous question with Adobe CC do my job nearly impossible.

  Running Adobe first Pro CC 2015 9.2.0 (41) build on a brand new macbook pro 2015 provided by my work.

  When I start a new project, I will import my clips and if I add them to the timeline immediately they will import with their audio very well and everything will work. After about 10 minutes of work on the project, however, no matter what video file with an audio track that I drag in my calendar won't matter is no longer with an audio track, DESPITE the fact that the file was related, audio compatible and if I open the clip in the source cutting machine there will be sound. If I try to cut and import the clip of it the clip still will not have audio when importing to the timeline. It's infuriating! I recorded a gif of the question:

  

  Any ideas at all? My only option is to save the project, open a new one, clips import it immediately with audio, copy it to my Clipboard, reopen the real project and stick!

  Its all in the correction of the source.

  

• is there a way to NEST or MERGE videos and keep the audio waveform in the timeline?

  Hi guys,.

  I was struggling with solutions for my workflow.

  I do a lot a microphone on a single video track changes. Then when I want to apply and modify the presets, I must apply the effects on all the small changes (sometimes 100 edits in a 3 minute clip).

  So I learned about fusion - but the merger does not allow you to modify the effects in the batch. So in the above example, if I want to make a change in an effect in a merged item, I have to hold single OPTION click on all editions of 100 and then adjust the effects.

  Then I bent over the NESTING. It works pretty well because it transforms all 100 mounts in 1 clip and I can't batch "edict", which means that I can change the effects on all editions of 100 at a time (because it's now 1 clip on the timeline). "

  However, the problem I have now nesting is... get rid of the file audio waveform in the timeline panel. So now, it is difficult to edit audio.

  Is there a way to merge, merge or nest together to make 1 clip (like nesting) and also to keep the audio waveform on the chronology of the changes?

  Kind regards

  Try the sequence > rendered audio and see if you get a waveform.

• Why you won't see names of audio clip in the timeline in CC?

  It's very frustrating, so I hope there is a solution. I have to be able to read the names of the audio files in the timeline... especially music videos. Why they would remove this feature? Is it possible to get it back? And while I'm at it, why now you expand the timeline tracks to be able to read the names of the tracks? (I have all my track of the label names, but obviously don't want that any enlargement just to be able to read what I wrote every track... it would be a cot in a timeline stir since I was a minimum of 10 audio tracks at all times!)

  Thanks for any help on this! I just spent to v.8 CC yesterday and am working on all the kinks.

  Hit the key in the timeline panel and check the names of Audio.

• You can "zoom in" the audio waveform in the timeline?

  Impossible to find a solution to help or the FAQS, so I'll post my first question here :-)

  I want to zoom in vertically on the audio waveform in the timeline panel. My situation is that I have an audio mix 24-bit of a concert of classical music with a fairly large dynamic range, is very strong and very quiet bits bits in a single audio file. I don't see enough detail of waveform in the quiet parts, even when I enlarge the track vertically. I did not find a formal way to zoom in, at least in the timeline panel. The display of the audio waveform only in the monitor source offers a vertical zoom.

  Official aid offers only this:

  "To see more volume when viewing an audio waveform in the timeline, increase the height of the track."

  That seems to imply that "Zoom" in additional to get really quiet parts is not a feature.

  I found a bit of a workaround, which is to adjust the gain of the video - audio waveform as a result changes. However, I prefer not to change the volume whenever I need a different vertical zoom on the waveform.

  Thank you

  3 P

  No, you cannot zoom in analogues in the source monitor.

  Will be a feature request good however.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform