No Bluetooth in the settings
I'm unable to turn on or turn off the Bluetooth option in settings (Inspiron 1440, win 10-64 bit).
I tried the update of windows for the system.
I tried to install the network R228532 driver that produces an error - "Setup.rul 318 occurred and Setup cannot continue.
Hello
Has your Inspiron 1440 bluetooth Dell 365 inside card? I think it was the card bluetooth comes standard with this model. If so, you can go on this thread about 10 drivers for the Dell 365 bluetooth adapter Windows. Given that the Inspiron 1440 is not on the list of systems tested to be compatible with Windows 10 which is perhaps the only way to get a compatible driver installed and allow you to turn on bluetooth on and off.
Let us know if that helps.
Todd
Tags: Dell Products
Similar Questions
-
iPad Air 1 No. cellular data in the settings
I have an iPad 32GB 1 Air and when I go into the settings application there is no "Cellular data" tab / menu as it is supposed to be... I have only a connection wi - fi and bluetooth and my ipad it's wi - fi + 4 G. I put a sim card but nothing happened to...
You can validate the model number found in settings-> general-> about-> model?
Are you sure that your iPad is a cell model?
It has a card slot on the side of the iPad sim?
-
Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time
I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.My question is: How can I have WLAN and Bluetooth at the same time?
To use a Bluetooth mouse with WLAN connection.Thank you very much
HelmutHello
Using Win 8.1?
Usually you could turn on and off Bluetooth in Win 8.1
Settings PC-> PC &-> of Bluetooth devicesThere, you can move the cursor to BT for THE position.
-
Voice command using bluetooth, when the phone is locked?
I am triggering the voice command using the bluetooth headset when my phone is locked. This happens, the only way is to unlock the phone using the slider and drawn the boss. It's kind of irritating, like one can do this fundamental task in all other phones. I can't find the settings to do this.
Now with the GB update by selecting 'allow bluetooth bypass' works and does exactly what I want. Hope this help anyone else having this problem.
-
Activation of Bluetooth via the control panel in Vista
I have Sprint everything data incrusive service and a new blackberry phone. I'm trying to set up as a bluetooth device to access the internet on my Vista laptop. For some reason, I can't do "recognize" to each other. My phone does not recognize my computer as a bluetooth device and my computer does not recognize my phone as a bluetooth (from the control panel option) device. Can someone please tell what I am doing wrong? What step am I missing? Is there some sort of card, I need to make this work?
Thanks for your help!
ReeAnn
Hello
To add a few options to Ajay K fine tips.
Hardware devices not detected or does not work - a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAdd a BlueTooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesHow to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connectionThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
as expected when you click on the element - for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-usIf you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.
BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.html---------------------------------------------------------------------
Change settings for a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-deviceAdd a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerAdd a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions---------------------------------------------------------------------
More information of possible interest to some:
What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-PanConnect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-PanI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
How can I turn off wireless and bluetooth via the bios?
"How to turn off the Wi - Fi in bios maps?
I have a laptop Toshiba and Windows 7.
Some specifications are necessary for me to work on a remote network. Bluetooth and Belarc test still does not work and I get the message"wireless cards must be disabled in the bios. »
Without thread is DISABLED in the BIOS, also, I went to the network and the Internet and chose WIRELESS DISABLED ON HARD WIRED CONNECT and network cards, I DISABLED it. Also, I went to the network and sharing Center and changed the settings of the adapter to DISABLE.Wireless Configuration Utility > Broadcom Wireless Utility > "No currently no wireless available and active devices."
Bluetooth is UNINSTALLED
What else can I possibly? I would appreciate a solution.
Thank you
GVautour
Hello
Thanks for posting your query in Microsoft Community.
You want to turn off wireless and Bluetooth via the BIOS, I suggest you ask to contact the manufacturer of the computer for that.
Please do not hesitate to post, if you face problems with Windows in the future, we will be happy to help you.
-
I have a problem with the bluetooth on the computer being lost.
Hello
In a search of my volume indicator I refresh my settings of the icon as expected my instructions from microsoft.
But now my bluetooth icon is missing. Pls help for the same thing.
Mine is series of Acer laptop Aspire E1-531.
Concerning
Hi Anugamini,
1. are you referring to the Bluetooth icon in the taskbar?2. you talk about internal control of bluetooth device to the computer or is it a separate bluetooth device you installed on the computer?
3. will Bluetooth listed in the list of devices in Device Manager?4. What were the Microsoft instructions followed by you. Please clarify?
If you're talking about only the bluetooth on the computer icon:
1. click on start.
2. tap bluetooth.
3. you will get the results for bluetooth.
4. If you find the bluetooth icon, you lost.
5. right click and restore returned to the location that you want.If bluetooth is completely removed from the computer. Check if the bluetooth function is running in Windows Services:
1. press Windows key + R both together on the keyboard key.
2. in the control run, search box type "services.msc" without the quotes and click OK.
3. Locate the service Bluetooth service is present in services.msc and started.Check if the Bluetooth is listed in Device Manager:
1. press Windows + X key bot together on the keyboard.2. click on Device Manager.3. check if you see that the Bluetooth device is listed and to update the latest manufacturer's driver.
To download bluetooth driver:Drivers and manualshttp://us.Acer.com/AC/en/us/content/drivers
Update the latest version of the driver for the bluetooth on your computer:
1. press Windows key + X key together on the keyboard.
2. click on Device Manager.3. right-click on the Bluetooth adapter.4. update the drivers.
Now check if the visible bluetooth on your taskbar of the computer.
Additional reference:
How to display the Bluetooth icon in the Notification areaAdd a Bluetooth device or other wireless or network device: frequently
frequently asked questionsHope this helps, please reply with the status of the question to get help on Windows. -
Original title:
Try to connect Huawei Sonic to win7x64 pro edition using bluetooth. Huawei Sonic is recognized in devices and printers, and shows paired but not connected in the settings on the phone. How do I overcame the problem of connection I want to transfer photos from phone to PC?
Hello
1. are you able to communicate and share with other Bluetooth devices?
2. what happens when you transfer files?
3. do you get an error message?
4 you did changes to the computer, before the show?
Method 1:
Connect the phone to another computer and check.
Method 2:
If you are unable to connect to another computer, you can contact the manufacturer of the phone and check.
-
Problem with drivers bluetooth on the computer.
I've been recently pregnant Philips DS8300. My Samsung laptop can't find it. I thought that the re is no driver for the device, but when I try to download the driver, it will not be installed. Help, please
Hello
Check with the support of Mr. Phillips and Support from Samsung and ask in their forums (if any)
on known problems. They should also provide methods of connection.Phillips - Support
http://www.USA.Philips.com/c-m/consumer-supportSamsung - Support - click on 'laptops', ' All in one ' or any other link appropriate
http://www.Samsung.com/us/support/main/supportMain.doSamsung - visit your country Site
http://www.Samsung.com/us/common/visitcountrysite.htmlTry this:
Disable the Bluetooth device.
On computer Charms Bar-> the settings-> settings change PC-> devices
HOLD the Power button on the device for 8 + seconds until the BLUE light flashes.
Device is entered mode pairing - on computer, click on "Search for Devices".
Install or update drivers if necessary if Windows 8/8.1 will have plenty.
If paired-> Panel-> Sound - reading devices - set as default if you wish.
============================================
Some troubleshooting methods:
Read these:
Why isn't Windows find my Bluetooth or other wireless devices
http://Windows.Microsoft.com/en-AU/Windows-8/why-isn ' t-windows-conclusion-device
Device advice
http://www.Bluetooth.com/pages/device-advice.aspxMicrosoft - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWhat happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctlyBluetoothView is a small utility that runs in the background and monitor the activity of
Bluetooth devices around you. For each detected Bluetooth device, it displays the following
information: device name, address, Major Device Type Bluetooth Type device minor, first
Detection time, last detection time and more. BluetoothView can also inform you when a
new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
a quiet sound signal. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all current detected bluetooth devices
to the standard output. For each Bluetooth device, the following information is displayed:
Address MAC, Minor Device Type, Device Type Major and possibly society
name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.htmlBluetoothLogView is a small utility that monitors the activity of Bluetooth devices
you and displays a log of the devices in the main window. Whenever a new
Peripheral Bluetooth comes in your area and when the appliance leaves your area, a new line of log
is added the following information: device name, device address, time of the event, event
Type ("Device arrival" or "Equipment Left"), Type of aircraft and the company that created the device.
BluetoothLogView also allows you to specify a description for each device (according to her)
MAC address) that appears in the column "Description". -FREE
http://www.NirSoft.NET/utils/bluetooth_log_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Is there a way to read the settings in a .pst file?
Hi all!
I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:
@^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @
Is there a way to show somehow what they do and what they use the settings?
Thank you!
You're right, the settings file contain only of the code when opened in a text editor.
But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.
The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.
Hope that helps
Edgar Rothermich - LogicProGEM.com
(Author of "Graphically improved manuals")
http://DingDingMusic.com/manuals/
"I could receive some form of compensation, financial or otherwise, my recommendation or link."
-
Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.
Greetings jenniferfrom46,
From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.
If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.
Have a good!
-
My update is my phone keep cycling through the settings of update iCloud
My update is my phone keep cycling through the settings of update iCloud
What should I do
Try disabling the Contacts under settings > iCloud. When you are asked if you want to keep them on your phone, select "keep". Tomorrow or Saturday, rallumer turn it back on again, select "Merge" and see if the problem is resolved.
See you soon,.
GB
-
Whenever I try to download iOS 10, the settings app crashes. How should I do if I get the update?
gswizzleeeee wrote:
... the settings application crashes.
This is very unusual. Two thoughts come to mind.
- Your storage space is too full? Check the settings > general > storage & use iCloud > manage storage (in storage). Make sure you have at least 10% (hopefully more than 15%) of total storage of your iPhone for free.
- Use iTunes (you must use the current version - 12.5.1, as this is the only version supporting iOS 10) to upgrade. See 'Your device via iTunes update' here: update the iOS on your iPhone, iPad or iPod touch - Apple Support software
-
Double click on the ios10 lock screen does not display Apple pay even if it is enabled in the settings.
Hello JPMain,
Thank you for using communities of Apple Support. I understand Apple pay is not an option when the double click the Home button. I know access pay Apple for a locked screen can do so useful everyday. I'm happy to help you to get this resolved with you.
I recommend first restart your iPhone. This can solve many unexpected behaviours. Follow the steps below if necessary.
- Press and hold the sleep/wake button until the Red slider appears.
- Drag the slider to turn off your device completely off.
- Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.
Restart your iPhone, iPad or iPod touch
If the problem persists, the next option would be to reset all settings. It takes all the defaults, including passwords and Wi - Fi networks, alerts, notifications, brightness, wallpaper and sounds. This will also remove your cards Pay of Apple. Even if no content is lost with this step, it is always a good idea to back up first. If you do not have a recent backup, use the following link for assistance if necessary.
The backup of your iPhone, iPad and iPod touch
Once you have correctly saved, reset all settings in settings > general > reset > reset all settings.
Have a great day!
-
10 iOS update came out today, but it does not appear in my "update software" in the settings, what do I do? or how long will it take to show?
That may depend on the country in which you reside. As AFAIK, new OSs are generally released according to the marketing of policies in one country or another, not at the same time global. I can't detect what country you are.
Maybe you are looking for
-
Got my lenovo a year ago. So far, it has been a great lappy until recently. (1) for navigation it freezes up. I use the iron or Chrome. I tried to remember when he started to do, and I think it was after updating Avast. (2) for the execution of some
-
Driver LaserJet HP1020 won't load does not in win - xp sp2
first of all the wishes of the day! I'd like to introduce myself is Martial of British Colombia has been working for over the last decade in the it field, troubleshouting since the beginning and not installed the HP products in different industries.
-
Rundll32 to run after the cancellation of IE9 on Windows Vista
Hi, I am using Vista and after I closed IE9, then two rundll32.exe process running, one with 700-800 k. for this slow down my computer! I already clicked on "Delete browsing history by leaving" so please do not suggest that.
-
The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected. I was hoping that would solve the problem. Failed to connect to router just after the firmware has been updated succe
-
HelloI try to use PAMO REST APII've written several java methods that work correctly (even if some details took me long to understand), but now I'm stuck in this onehttps://host:port / opam, account, accountUID, Fundthat sends me a 409. Clues? Thanks