No hard drive problem when installing xp in new inspiron

Similar Questions

• Qosmio G20: No HARD drive recognized when installing XP

  I have a problem with my Qosmio G20.
  One of my hard drives was damaged so I bought a new try to reload Windows XP Pro but it came out with an error massege that says: "the installer has NOT FIND ALL disk HARD DRIVES INSTALLED in YOUR COMPUTER.
  But when I check on the Bios it supported hard drives

  I would appreciate any help from you guys

  Hello

  Maybe your Win XP OS does not include the RAID driver!

  Qosmio G20 supports RAID functionality and you must include the RAID driver during the installation of WIN XP by pressing the F6 key.
  The RAID driver can be found on the European driver Toshiba page.

  If you need information more than just posting it here ;)

  Good bye

• laptop HP pavilion touch 14: replaced defective hard drive with pre installed OS on new HDD - device not found Boot (3F0)

  Hey guys,.

  I have a pc hp pavilion touch laptop 14, which has been having a defective hard disk that the operating system was not start and the system test indicated that the hard drive contained errors.
  
  I replaced the hard drive with a new one and before installing the hard drive I formatted with a win installation 8.1. I thought the laptop would just start normally to win8, but gave me a screen saying:

  boot device not found please install an operating system on drive hard drive (3f0)

  The hard drive is new and I did not not how its gives me this error!

  In addition, this laptop does not seem to boot from a cd to format!

  Any ideas?
  
  Thank you
  Karl

  Hey BHK6,

  I found out what was wrong! It was so simple!

  I just need to make the boot inherited from the bios, like that he started directly from the hard drive and does not need of any software pre installed HP to start.

  Thanks for your help anyway

  Karl

• MSVCR71.dll missing. I installed Windows 7 Pro to Vista Home Edition. EU back up my HARD drive. When I try to put things on the HARD drive I get the message that msvcr71.dll is missing. How to install Windows 7?

  I installed Windows 7 Pro to Vista Home Prem Edition.  Back up my HARD drive with the included HP software.  Now I can't get my info on the HARD drive.  When I try to open the computer file backup says msvcr71.dll is missing.  How to install and where?

  Hi dezertdawg,

  Welcome to the Microsoft Answers site!

  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file. In some cases, the msvcr71.dll errors might indicate a
  problem of registry, a virus or malware problem, or even a hardware failure.

  You can use the tool (SFC.exe) System File Checker to ensure that the system files are intact and replace the file. Follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I formatted my hard drive, and when I try to install an operating system, repeat me "bootmgr is missing".

  I formatted a hard drive and when I try to install an o/s he repeats to me bootmgr is missing. I tried 2 o/s XP and win7 is just does not start... and the BIOS is missing pls help.

  original title: I formatted

  Create a bootable CD using one of the two utilities listed below. The utility allows you to delete the partition so that the disk space is listed as "unallocated". Do not create a new partition, just boot from the Windows CD or DVD and let the installation process to create the Windows partition.

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, Format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  General fill info zero (including screenshots): http://gizmodo.com/5494427/leave-no-trace-how-to-completely-erase-your-hard-drives-ssds-and-thumb-drives

  J W Stuart: http://www.pagestart.com

• We had to install a new hard drive.  I installed CS5 - no problem, but cannot download and install CS6.  Can you help me?

  We had to install a new hard drive.  I installed CS5 - no problem, but cannot download and install CS6.  Can you help me?

  Hello

  You can check the above troubleshooting steps: https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html

  Let us know if this helps!

• Alternative to the reset by Satellite A660 for potential HARD drive problem

  In the last week or two, I got a few blue screens, saying he was driving demand, and that windows must be shut down to avoid damage my computer.

  I have just restart and continue working.
  The last time it happened, I had repeatedly "initialization failed" and it says hdd, SDS, fdd. If I pressed the power button until I didn't see no signs of activity, then started. Things went well. I called Toshiba support and they recommended that I go home and save my files before continuing. It took hours selectively to clean, sort the previous backups, and a small footprint of the backup system.

  When I called Toshiba once again, they recommended a "takeover", which is restoring the factory settings. It puts me in the stone age. I have to go through a never-ending process of the upgrade to Windows 7 Pro 64-bit, install and reconfigure all the applications and environments/configurations, etc. It will essentially take on holiday, if not more. I'll also have to get another computer (maybe a netbook) to stay in touch while I restart my laptop. It's barely more than a year.

  Is there a diagnosis I can do to determine the probability that there is a hard drive problem? Support for Toshiba said that is the surest way, because it provides a diagnostic F10 for the hard disk code, and it also pushes the bad sectors at the end of the disc (logically, I suppose, since you can't physically move a fault).

  > About Hitachi DFT, is it important that my HARD drive is Toshiba mk6465gsx? This is what is displayed "Hard drives" in the Device Manager.

  It s no matter what HARD drive manufacturer, it is the Drive Fitness Test is able to scan all hard drives to find errors.

  > Also, http://www.hitachigst.com/support/downloads/#DFTshows links to create boot disks, but I was wondering if I could create a bootable instead.

  Not sure if this is possible if there is that one option to create a startup disk, and then a flash stick does not work. But of course you can try this out.

  > This laptop does not come with a floppy drive, and I still create coasters trying to burn discs.
  You don't need the floppy drive, the tool must create a disk bootable (CD)

  > I guess that the same question can be asked on Memtest86. Another issue is the relevance of Memtest86 for my system. My c drive has a "Program Files" folder, but also a "Program Files (x 86)" folder for 32-bit applications. Memtest86 is for the x 86 architecture. I don't know if my 64-bit Windows 7 involves a non - x 86 architecture.

  I guess that Memtest86 should also work on Win 7 64 bit systems. But also the MemTest 4.20 is 64-bit capable

• Z500 hard drive failed, when the new bios disk inserted don't is not loading

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  caduceusuk wrote:

  Out of the blue my z500 crashed and restart the hard drive was not recognized. I opened and made sure it is properly connected. Still nothing.

  I bought an ssd and inserted into the slot of the hard drive and when turned on it flashes the lenovo bios boot screen then instantly goes black. It flashes black then black and backlit constantly

  I removed the SSD and it loads the BIOS without a drive.

  I returned the ssd and got a replacement. The same problem reoccured.

  The ssd is approved to the z500 site crucial and fine as an external hard drive can be installed.

  The original hard drive makes a powered noticeable when rattle noise so I guess it was a normal failure.

  Any ideas? Any other information needed? I am a complete newbie to these forums and appreciate help from anyone.

  Thank you very much

  Try to install the ssd (of course power should be turned off before doing so). After the physical installation and place the back cover press the NOVO button. A menu should appear and select bios Setup to access the bios. If you can go into the bios put the bios configuration to the default values. Then set the PXE boot to disable. Save and exit.

  Note: You must start in a usb/dvd of windows installer since the ssd has nothing about it yet. Then may need to change some settings in bios inorder to do this.

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• New HARD drive - how to install Windows?

  Hey guys,.

  I have a problem with my Dell Dimension 9150. A friend of mine gave me as a gift, because I built his new computer. We put his HARD drive in his new computer.

  The problem is: there is no CD of his computer.

  I have the original Windows XP and Windows MCE and CD licenses. The Dimension has a MCE key so I would like to install MCE.

  After installing a new HARD drive, I tried to install Windows. BIOS shows me the HARD drive. When I start the installation of Windows and choose "Windows Installer", I get to the screen where I can choose, what partition I would use. But installing Windows shows me no HARD drive!

  Don't know if I need SATA drivers? If I should need it, where can I find them? And how to get them in the Windows installation? I know that I can load pressing F6, but I don't have a floppy device.

  Would be great, if someone could help me.

  
  

• Satellite 2430-101: external USB 2.0 HARD drive problem

  Hello everyone,
  I have Toshiba satellite 2430-101. Recently I bought external 40 GB hard drive. When I connected to my toshiba usb hub, it is said that it exceeds the limit of the power, and I need to detach the external hard drive. When I read these last questions, someone suggested to uncheck the power supply to the usb hub options, but he says always the same. They are someone to help me.
  Concerning
  Sri

  Hello

  Well, in my opinion, this problem occurs if the USB port can't provide enough power.
  In this case, that the USB hub must be connect to external power.

  Good bye

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Qosmio F60 turning is not on - HARD drive problem

  My F60 running stock windows 7 and when I turn it on I get a black screen with the following text:

  + Check the file system on C: +.
  + the type of file system is NTFS.
  + Volume name is s3a5802d002 +.
  + One of your disks needs to be checked for conisitency. +
  + You can cancel the disk check, but it is strongly recommended that you continue.
  + To skip verification of the disc, press any key within 10 seconds.

  If I leave it just like that.
  I try to ignore it, and it does not work so I turn it off and go again on the third time, to turn on while I press ESC. What should I do about it?

  Re: do everything or send it as it is only 6 months old, it is Bernard did this for 5 months

  Hello

  It sounds a bit like a HARD drive problem.
  I recommend checking out the HARD drive using a free tool called Drive Fitness Test
  This free tool allows you to get more details on the State of the HARD drive and maybe some error would be detected which would mean that HARD drive failures and disk HARD must be replaced.

• Hard drive partition and install the new operating system

  HY,

  If I partition my hard drive and I install a new OS (E.g. Ubuntu 14.04) my warranty ends?

  Thank you

  SA

  Hello

  No, it will not void the warranty but HP only supports the problems with the original operating system and prove the operation of the equipment of the original OS.

  Do the recovery disks and keep them safe before so that you could go back to factory settings if there is no problem of partitioning.

  Recovery partition usually works after partitioning, depends on your luck, but you could make the 'Active' Partition in disk management and try for recovery if it works or not.

  Thank you

• A55 (8982 - 77G)-Windows 7 SATA Hard Drive problem

  Hi, hoping someone can help here. I just bought the above system, it came without a hard drive, as it was purchased at a business. I installed a Seagate 200 GB SATA hard drive and I am trying to install Windows 7 Ultimate... the HD is recognized by the BIOS and the POST, but the installer of windows 7 do not see, I searched relevant drivers for the motherboard... but can't find it nowhere I tried to set the Auto and Serial ATA SATA BIOS setting only with no success... Any help would be appreciated.

  Concerning

  Hi and thanks for the answer, had sorted out, seems it was a b the hard drive problem. Once I have two-way for another installation of windows 7 200 GB SATA drive picked up immediately.

  Concerning