Similar Questions

• CVD reference is missing the installation of Windows 7 Image option in MIrage Client after the upgrade to 5.0 Mirage

  Prior to the release and the Mirage 5.0 upgrade, I had a CVD of reference created. I did 5 revisions to the Base layer on the MCV Ref. After each change, I clic click straight on Mirage Client icon, select Tools and then run "Installation of Image of Windows 7. Then I go back to the Console and capture a layer of existing base of CVD Ref. has worked like a charm.

  Since the upgrade to Mirage 5.0 and after the installation of the new client on the MCV Ref, the installation of Windows 7 Image tool is missing. If I try to capture the base in any case layer, it crashes. I checked the logs and he returns with "Execution dock could not be completed" and never captures the base layer.

  I have uninstalled/reinstalled the client on the MCV Ref.

  I have removed the Ref CVD of inventory and created again.

  Still cannot capture the base layer.

  The next thing im going to do is flatten the CVD Ref and available with a base previous output layer and see what happens.

  BTW, this happens on two Ref CVD I created. for example a team lead Ref CVD and another is a Call Center Ref CVD.

  any ideas?

  The only way I could get my MCV reference existing (before Mirage 5.0 upgrade), to capture a Base Layer (after changing new) without having to rebuild my reference Image from zero has been to Sysprep the machine and capture with WDS. I removed the Mirage customer before sysprepping. Then deleted the CVD the stock updated Ref waiting and then I rejected the device pending and removed from CVDs rejected.

  Then was to bring the return of WDS Sysprep image and install the Mirage Client and create a new MCV Ref. I made a few changes and was able to capture the base instantly layer. I will now do the same for the rest of my pre Mirage 5.0 Ref CVDs. I had 3 Ref CVD anyway. If they were not complex images, I would of just them rebuilt from scratch.

  I'm happy to finish with WDS, so much easier to make changes to the images on Mirage.

  Hope this helps someone else with the same number of "Execution of Shim failed to Complete" when revisions to images on Ref CVD after the upgrade to the Mirage Server 5.0

• Why is not synchronize Lightroom CC more after the upgrade?

  Hello

  I recently upgraded to Lightroom and since no photos to sync to the cloud. It says on the desktop app 'x Sync photos' but nothing ends on the cloud or mobile devices (Android). I can see the names of collection, but not photos. I followed the various Councils of deleting file of data synchronization and data to mobile devices, but without success. Before the upgrade everything worked well. Can anyone help?

  Could you please send me a journal diagnostig Desktop LR - better as a private message with a downloadable dropbox link.

  You can trigger the newspaper through Desktop LR-Mobile with Lightroom > preferences, and when you hold down the ALT key, you will notice a diagnostic log button to generate

  This problem occurs when you are connected via ethernet or wifi? BTW. Does the job of synchronization for your with an earlier version of Lightroom?

  -

  Guido

• After the upgrade to Windows 10 ALL my pictures are GONE! Lightroom started upward as if it were a completely new program. Tried the Adobe difficulty (all 3 steps) nothing.

  After the upgrade to Windows 10 ALL my pictures are GONE! Lightroom started upward as if it were a completely new program. Tried the Adobe difficulty (all 3 steps) nothing. What now?

  Hi lisah64134956

  Greetings.

  • Please specify what adobe patch are you talking about?
  • A you kept a backup pf your LR catalog and images somewhere before moving on to Windows 10.
  • You have access to your original images, or they went too?
  • Try to search the catalog using windows search, .lrcat is the extension of the catalogue, see if you find something.

  Concerning

  Rohit

• My laptop camera image on the upside after the upgrade to Windows 7 Professional 64-bit.

  I have a laptop Asus G50Vt - X 1, which is a 64-bit computer. It had Windows Vista Home Premium 64-bit installed on it and the unit worked properly with him. I ran the update of Windows 7 Advisory on this matter and he said I could upgrade to Windows 7 64 bit. After the upgrade to Windows 7 Professional 64 bit the images from the camera are all upside. I contacted Asus about the problem and they sent me the drivers updated, but the images are still upside down. Pourrait Windows 7 cause this problem as I know that it worked fine under Vista?

  I also noticed that my dvd/cd player and external hard drives don't stop the execution after that I have quit an application. When this happens, I can't eject the cd or remove the drive from the computer.

  Windows Update has nothing to do with the upgrade of Windows. Post future questions in one of these forums, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Lightroom not responding do not develop after the upgrade to windows 10

  After the upgrade to windows 10, Lightroom will not work in develop after importing new photos. Can anyone help please.

  Alan

  Hi Alan,

  Please refer to this thread CC Lightroom freezes when develop mode and disable the use of the GPU in Lightroom.

  Let us know if that helps.

  Kind regards

  Assani

• Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

  Hi all

  After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

  What should do?

  standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

  Kind regards

  Robert

  Thank you hipolitorodrigues,

  your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

  CU, Robert

  8  re: does not start Lightroom CC

    

     Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

  Go to the Panel, then programs and features.

  Please select Microsoft Visual C++ 2012, 2013, and fix it.

  Restart the computer and then let me know if the application works.

• After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work.

  After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work. Also several times when I go to the library to develop fashionable mode, programs stops. I am really frustrated. Help, please.

  Also several times when I go to the library to develop fashionable mode, programs stops.

  It is often a symptom of an incompatibility between LR and your video card.  If the other suggestions don't help you, go to System Preferences > performance and uncheck use Graphics Processor.

• Hello, I can not activate photoshop lightroom cc and after the purchase of adobe in installments I do?

  Hello, I can not activate photoshop lightroom cc and after the purchase of adobe in installments I do?

  Hey stefanog60680004,

  I see that you have the subscription for: -.

  Piano Fotografia Creative Cloud (rinnovo all year)

  Mac/Win, all the available languages

  Please Sign Out and sign in again using your Adobe see identification code also the steps mentioned in this document https://helpx.adobe.com/creative-cloud/kb/activation-connectivity-errors-creative-cloud.ht ml.

  Kind regards

  Nicos

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9

  After the upgrade to windows 7, Warcraft3, Battlefield Viet Nam cannot run in 4:3 screen but 16:9... my East of 1366 X 768, so the games are run with black screen on the left and right sides... What can I do? He has run well in Vista =]

  1366 x 768 is the strangest resolution that I've ever heard of. Your video card drivers helped "keep the proportions" and decided to not to stretch imagine because I assume that you can't choose this exact resolution in the game. If your monitor has an overdrive video or image format option, you can enable or disable that or if you have a NVidia card, you can change the picture format option in the properties of the video card.

  If you have an ATI card, then you're stuck with a proportional image: P
  

• After the upgrade from Vista to Windows 7 games installed in my laptop (Chainz, Cubis and Bejeweled, etc.) have bars on each side when displayed in full screen.

  I have a laptop Acer Aspire with a screen 16:9 wide (15.6 "), it has the latest graphic drivers ATI and all operating system updates.  After the upgrade to W7 (free upgrade with the purchase of the laptop) everything works wonderfully except all the games installed now not displayed in full screen, I get black bars on both sides, they used for Vista, but not with W7.

  I already tried different settings in the games options, administrator, resolutions screen different, being run in maximized 'Vista' and 'Run' mode of the file properties dialog box shortcut and .exe.  This happened without any security program installed that is not a factor.

  I am at a loss.

  This is to maintain the ratio l / h. It is how the images stretch. ATI no longer has the opportunity to play with the proportions for the sort of stuck like that unless you can find in your version of ATI Catalyst. It is in fact full screen as opposed to windowed mode, but it does not cover the entire screen.

  You can try different resolutions within the application to see if it will actually make your apps full screen to use the entire screen. That's all, remains to be done. I don't know why ATI has decided to exclude this option because some people hate the black bars or hate the stretched images.

• After the upgrade of the APEX 4.2.0.6, I don't see any change

  Hello

  I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.

  When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?

  SQL > SELECT username

  2 FROM dba_users

  3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')

  4 AND USERNAME NOT IN)

  5. SELECT "FLOWS_FILES".

  6 DOUBLE

  7 UNION

  8. SELECT 'APEX_PUBLIC_USER' FROM DUAL

  9 UNION

  10 SELECT SCHEMA s

  11 FROM dba_registry

  12 WHERE id_comp = 'APEX');

  USERNAME

  ------------------------------

  APEX_030200

  I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839

  Thank you for your help.

  Christian

  Hi Christian,

  chipniz wrote:

  Hello Kiran

  I redid all installation steps and found that I now have this error:

  Service temporarily unavailable

  The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.

  When are you facing this error?

  • Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
  • Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)

  What kind of error is it?

  • HTTP error with an error like 404 code
  • Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)

  What is the type of the OHS?

  • Oracle Application Server 10g
  • Oracle HTTP Server distributed with Oracle Database 11g

  Finally it is part of your question:

  When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?

  What did you mean by that?

  • You receive the login for the old version screen
  • You receive a blank page

  I would like to you check the following things:

  • Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
  • Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
  • Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI

  I hope this helps!

  Kind regards

  Kiran

• After the upgrade of Windows 10 cannot burn a DVD

  After upgrade to 8.1 Windows 10 I get the following message when I try to burn a DVD

  "Something is preventing a burn DVD success.

  Use the ISO, saved to the following location to burn your disc more later:

  Svc.ISO of C:\Users\Kenneth\Documents\2015-08-09 of worship.

  Is there a setting that I missed in the upgrade?  In addition, I can't locate the ISO image file mentioned or at least I'm not in this directory?

  osprey20

  What you describe is probably a problem first elements 13/13.1 you may encounter on Windows 10 64-bit or 64-bit Windows 8.1.

  It is it happened 10 Windows. I did the upgrade even you did and all of my programs to Premiere Elements survived successfully. One of the first things I checked after the upgrade was the burn on DVD-video on DVD and AVCHD on DVD.

  First Elements ATR troubleshooting: PE: Premiere Elements on Windows 10 daily discoveries

  From your description of your results, go to edit Menu/preferences/general and look at the effect with and without the following preference disabled

  "Use hardware acceleration (works on Intel HD Graphics 2000 or higher)"

  Also, go to the folder of encoded files and delete its contents (encoding of temporary disk files)? Make sure that this folder is located in an area with lots of free space on the hard disk. See change preferences/Menu/Scratch disks and disk encoding category that goes back to the hard drive folder of encoded files.

  Let us start here and then decide what then.

  Thank you.

  RTA

• Could not find photos after the upgrade to Windows 7

  Bridge worked very well under Vista, but after the upgrade to Windows 7, I can't find one of my photos with bridge files.  Photoshop CS4 find them OK and made Lightroom, but for some reason Bridge does not list the sub folders.  If I click on libraries, he says "no file".  It does not list the pictures or my pictures.  I'm totally stumped.

  AlAugustine wrote:

  I tried all combinations of ctrl-click, click and ctrl, etc, I can think of but nothing reveals the reset box.  When I double click on the desktop icon, it loads almost instantly leaving no time to press ctrl before loading.

  One thing I did not mention, is that you must check that the bridge is already done in the background.  Open the Task Manager and click the processes tab and see if bridge.exe is listed.  If program so quit smoking.

  If you have the possibility of automatically loading at startup deck, I recommend that deactivate you in the Advanced preferences file.  It causes more problems than it solves.