No video and audio input for video has Jabber

Similar Questions

• Video and audio drivers for Satellite A100 - 756-PSAA9E

  I use XP SP3.

  The video and sound card on the site drivers do not work correctly - yellow mark in the Device Manager.

  Can someone tell me the exact drivers to use with this laptop model please?

  Hello

  All the drivers FRO Satellite A100 PSAA9E are ok and working properly!

  I see that you have installed SP3. This may be a reason why the drivers cannot be installed.

  Remove SP3, clean the OS using a free tool called CCleaner and try reinstalling the drivers!

  Check it out!

• Sound and Audio drivers for my 412TU CQ40 laptop

  Hello

  Can anyone suggest me where I can download the audio drivers and sound for my laptop.

  Hello

  Take a look in laptops--> material or other sections of questions. There is a topic here any downgrades. I don't understand. Why so many people downgrade to XP when Windows 7 is superior to Vista and XP?

  Best regards
  ERICO

• "A security and stability update for FF has bee n dnlded & ready 2 B is installed" updated: FF 37.0.2, but 37.0.1 is more recent. What to do?

  Received a Firefox "Software Update" which says: "a security and stability update FF has been downloaded and is ready to be installed" Update: FF 37.0.2
  Message has the ability to restart now or later. I'm on ver 37.0.1 and FF says it's the MOST RECENT! Is - this safe (from Mozilla) or an attempt to scam/Phishing? What to do?

  Firefox 37.0.2 is indeed a valid version

  https://www.Mozilla.org/Firefox/all/
  https://www.Mozilla.org/Firefox/37.0.2/releasenotes/

• Audio input level set manually on t5i

  First post here. I just started working with my new t5i, which I use to work on my current video tutorial series. In the manual, I see how it is possible to set the maually of audio input for an external microphone level, but I can't understand how to navigate in the menu that allows me to do this. I pored over the user manual a number of times and could not find this information. Can anyone help?

  Same camera in different shooting modes. The menus I described would be for shooting video in 'P, Tv, Av or M '. Anything else will give you a small selection of menu, as you have already seen.

• TRV27 DCR how can I turn off the built in mic? I use other audio entries for broadcast on the Web

  I use two TRV27s DCR to capture video live for broadcast on the Web, but I use another audio input for broadcasting on the Internet... ambient discussions are picked up by the microphones of the TRV27... How can I turn off?

  Sony Handycam do not have a menu option to allow the microphone to be turned on or off. There are two possible solutions for this:

• Audio input T510

  Hello

  I just bought a T510 and wanted to set up my Ventrilo Client, I recognized that I have just an audio output on the right side of the laptop. Is there an audio input for my microphone and where can I find it?

  I hope you can help me

  Best regards

  Christian

  Hello

  I just wanted to say that my problem was solved by this post:

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T510-combo-mic-audio-port-usage/TD-p/217613

  Best regards

  Watnuss

• After you have installed windows 7 on my hp pavilion dv4000, vga and audio routed to work. Help me

  After you have installed windows 7 on my hp pavilion dv4000 case, vga and audio to work. help me with a recommended sound and audio drivers for system operational windows 7. Please

  Hello:

  Please click on devices in the Device Manager. Then click on the Details tab. In the properties of the drop-down list, select the second element (Hardware ID). After the first string that will appear for each device.

  Those who will identify the features of model you have and I can try and find the drivers for them.  East - Windows 7 32 or 64 bit, you have installed?

  Paul

• I want to install firefox addon called "youtube video and audio downloader 0.3.5 by Chris. How can I check to see if it has malware

  How can I check if the program 'youtube downloader video and audio by Chris 0.3.5 has malicious software.
  When I go to download it has chain
  https://addons.Mozilla.org/Firefox/downloads/latest/413644/addon-413644-latest.xpi?src=userprofile

  I'm so nervous about downloading anything for fear of getting my hijacked browser or worse, because it's already happened twice. Any advice on this program or if there is a similar program to download youtube, who is known to be squeaky clean?

  Too, I have youtube downloader video and audio 0.3.5 by Chris on FF but have not used a lot or not at all. Today, Avast gave me a warning (probably a Malware DB recent update) that this product has very bad side. My two main concerns are a possible Trojan and adware popups - horse for now that I only have those on a single site, The Pirate Bay, but they are devilishly difficult to get rid of.

  Avast and some other malware utilities not come with Trojan horses, but I saw a EULA (on Board of another, may not be the same product) which explicitly stated the software would share information on the internet, probably tunnel through the firewall. Malware utilitie which would detect as a Trojan horse, or that they would assume that I installed it intentionally? How do they know?

  Are modules which arise on the FF Add-ons Manager > get guaranteed by Mozilla addons?

• Keyboard shortcuts for the video Composite and Audio Waveform

  I work in Premiere Pro CS6 on Mac OS 10.10.5. I am constantly switch between views video Composite and Audio Waveform in the Source monitor Panel. To do this, I have to use the mouse to click on the key icon, and then select one of the points just at the top of the context menu. My workflow would be so much faster if there was a keyboard shortcut.

  The official page of default keyboard shortcuts indicates no shortcut for these menu items. Mac OS system preferences > keyboard > shortcuts [shortcuts App] allows me to create shortcuts for application specific menu items, but not for context menus.

  Is there, however, a way that I can tell Premiere Pro CS6 to use a keyboard shortcut for the video Composite and Audio Waveform views?

  You can create your own... If you scroll the list link you to that, there is the Source section of monitor... which has options short keyboard available for your two wishes:

  

  Then, use Cmd / Alt + K to do your editing of the keyboard shorts... Scroll way down to find this section, then create a short. At the bottom, it will tell you if it comes into conflict with one another. Here I come to make Composite video, abbreviated as CC2015.2:

  

  By clicking on the line to the right of the effect you want to order makes these empty lines appear the "x" you will see in this view... click again and you can start typing your proposed short. If your entry on this line is already in use, will appear this very practical warning:

  

  So... do you some useful shorts!

  Neil

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Webcams for video and audio recording

  Hi team,

  I'm new to Microsoft webcams and I am looking to buy a good webcam.  I have the following questions & requirements...

  (1) is the webcam (Microsoft Life Cam HD - 3000) capable of recording audio and video images over distances of 7-8 feet from the source for a period of at least 2 hours?

  (2) are the video and audio, free software or licensed from the webcam as the videos will be uploaded to youtube?  Also the audio must be of good quality.

  (3) I have a small budget for webcams is there any other non-Microsoft Life Cam HD webcams - 3000 Webcam that can do this?

  (4) which is the best MS webcam for video and audio recording that Microsoft offer?

  (5) I have a lenovo w520 (laptop) and a windows 7 (OS).  Microsoft webcams do work on this configuration?

  (6) are there service centers available in India (Bangalore) for the support of these products? Also is there warranty on the product.

  (7) do you need a tripod or stand to place these webcams on?

  Hello

  Thanks for posting the query on Microsoft Community. Sorry for the delay.

  If I understand correctly you want to buy a good quality with low budget webcam. I suggest you go through the link below to select and buy a webcam that works for you.

  With the help of a webcam:

  http://Windows.Microsoft.com/en-us/Windows7/using-webcam

  The Microsoft HD - 3000 cam Life is compatible with Windows 7. Check the link for more information below.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardware&Name=Microsoft+LifeCam+Cinema+HD+Webcam&ModelOrVersion=&Vendor=Microsoft&Locale=1033%2C2057%2C3081%2C4105%2C16393&LastSearchTerm=Microsoft%2BLife%2BCam%2BHD%2B-3000%

  2 b & BreadcrumbPath = Microsoft + life + Cam + HD + 3000 + & TempOsid = Windows + 7

  To install Microsoft Life Cam HD - 3000, you can check the link below.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema/H5D-00013#support

  If you have any further questions, contact the Hardware Support team.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• Training and Audio and video resources for enforcement and ITS Update 9.2

  
  Team,

  I'm looking for online training and Audio and video resources for HER and 9.2 upgrade Application. Can some one link of this part. I am aware of the DOC id--I need the link Audio and video training.

  To get inside, I found the same training equipment for PUM ( https://support.oracle.com/epmos/faces/SearchDocDisplay?_adf.ctrl-state=15q4hlx7tf_9 & _afrLoop = 372078942576959 ). But, when I'm looking for HSE and 9.2 upgrade Application, I have to correct link.

  Waiting for positive response.

  Rgds,

  ITS training available on link below

  • PeopleTools 8.53: Presenting the framework research of PeopleSoft-Session 1
  • PeopleTools 8.53: Presenting the framework research of Peoplesoft-deuxieme session
  • PeopleTools 8.53: Presenting the framework research of Peoplesoft-troisieme session

  Thank you
  Alok

• Making the best use of space for the quality by balancing the video bitrate and audio settings?

  I have a few questions about the first export still / encoding in encore. I am trying to create a dvd single layer, where I maximize overall quality using as much space as possible.  The video is 97 minutes, SD 720 x 480, 29.97 FPS and consists of interviews for the most part, as well as b-roll hd cameras and stills, rare title graphic card.

  1. I can use dynamic link to send the sequence that appears to maximize the space available, however I have heard that using DL is generally frowned upon and I myself cannot tell what settings it uses (for example vbr, 2 pass, etc.). Is my interpretation that DL is not the ideal way to go wrong? If DL is just as good as a separate output, is there a way to know what parameters it uses?

  2. I used a bitrate calculator and tried a Min: 3.5 target: 5.5 Max: 8 audio output PCM and I found myself having a little more than 400 MB of unused space. When someone recommended a Min: 5.5 target: 7 output Max 8.5 the file size is too large with a simple DVD layer. I read that it is recommended to use an exit instead of PCM, if the video is over an hour audio Dolby. My question is is it a best practice to balance needs of flow rates and audio and video? I realize, of course, by using more data PCM is 'better', but it is usually best to go on the road to dolby and have more space to increase your video bitrate? What is the audio difference type that requires a high-end system to discern? Y audio data loss is worth for the benefit of video bitrate higher?

  I know it's a lot, just trying to maximize space to get the best possible performance. Thanks for any help/advice you can provide.

  -Nick

  As most of my videos are closer to 2 hours usually, I always used Dolby Digital, PCM takes so much space and I prefer to use this space to increase video quality.

  Note that by default, if you import a .wav (PCM) file into Encore, it transcode automatically that Dolby, unless you have changed specifically the default settings of transcoding in Encore.

  A decent basis for coding rule is 560/minute = bitrate, so 560/97 = 5.77 and I usually just round off a little for menu overhead and margin of safety. This requires using Dolby to 192 k, so I would use 5.6 average bitrate.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

  How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

  Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.