Noise suite of crush the hard drive. Now disk use stays 50% to 100%.

Similar Questions

• Replaced the hard drive - now screen Intel Rapid Storage Tech comes first?

  A couple of weeks ago, I replaced the hard drive in my laptop Pavilion dm4-3090se with a 240 GB Samsung SSD (the laptop came with a 500 GB Hybrid HDD which is now my backup).

  Everything works fine, except when I first put it in, I get the screen shown in the image below and it takes a good 5 or 6 seconds before it closes and opens Windows. How can I make this screen go away?

  

  You are running Windows 7 or Windows 8? I see that you still have the installed cache acceleration mSATA 32 gig drive and it has the Intel Rapid Storage, just off acceleration partition. Can you find the control panel Intel Rapid Storage and reformatting the drive to 32 gig Accelerator? It will look something like this:

  

  I suggest also just remove acceleration 32 gig of hard drive. You have really no more. You can not acclerate a SSD and shouldn't do anyway since having a main SSD is still faster than having the accelerator. See page 44 of the Manual:

  Manual

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• OEM PC upgraded with SSD, is back on the HARD drive, now 'infringement '.

  Hello

  A few years ago, I bought a cheap "emachines" for parents.  To speed it up, I recently replaced the HDD with a SSD former and re-installed windows from scratch since an ISO downloaded from Digital River.  I forgot if it is 32-bit or 64-bit.  I called the helpline automated from key OEM cannot be activated online and everything went well.

  A few weeks later the PC is regularly crashing, which I suppose is a problem with the SSD drive.  Then I advise them to put the old hard drive back, they have carried out.  Windows complains now that it is not authentic.

  Apart from re - install from scratch, I can do to convince windows that OEM key is always authentic?  It is still used with the same motherboard and according to this article on PC pro, the key is tied to the motherboard and it is perfectly fine to change the hard drive.

  Thank you very much!

  Jonathan.

  The MGA output:

  Diagnostic report (1.9.0027.0):

  ------------------------------

  Validation of Windows data-->

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7

  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =

  Windows product ID: 00359-OEM-8992687-00006

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {DCFF729B-C635-4FA1 - 813E-}

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.130828 - 1532

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details:

  Content Spsys.log: 0 x 80070002

  License data-->

  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition

  Description: operating system Windows - Windows (r) 7, channel OEM_SLP

  Activation ID: d2c04e90-c3dd-4260-b0f3 -.

  Application ID: 55(c) 92734-d682 - 4 d 71-983e -.

  Extended PID: 00359-00178 - 926 - 800006-02 -.

  Installation ID: 002276701125035581948993383723

  Processor certificate URL: http://go.microsoft.com/

  Machine certificate URL: http://go.microsoft.com/

  Use license URL: http://go.microsoft.com/

  Product key certificate URL: http://go.microsoft.com/

  Partial product key: 7QJB7

  License status: Notification

  Reason for the notification: 0xC004F057.

  Remaining Windows rearm count: 3

  Trust time: 21/04/2014 20:09:09

  Windows Activation Technologies-->

  HrOffline: 0x00000000

  HrOnline: 0xC004C533

  Beyond: 0 x 0000000000000000

  Event timestamp: 4:21:2014 18:44

  ActiveX: Registered, Version: 7.1.7600.16395

  The admin service: recorded, Version: 7.1.7600.16395

  Output beyond bitmask:

  --> HWID data

  Current HWID hash: LgAAAAEAAwABAAEAAAABAAAAAQABAA

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes, but no SLIC table

  Windows marker version: N/A

  OEMID and OEMTableID consistent: n/a

  BIOS information:

  ACPI Table name OEMID value OEMTableID value

  APIC

  FACP

  HPET

  MCFG

  WDRT

  LASRYVITRAGE

  AWMI

  SSDT

  Nevermind, I followed the steps detailed here and it seems to be the real / active again!

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  Also used for the first time windows remote assistance, which was very neat!

• Satellite Pro A40: Is it possible to format the HARD drive without disk

  I am passing on a Satellite Pro A40 to a brother. It is in very good condition, but has slowed down over the years. I want to get rid of my data (I have on a new machine) and speed up the system by formatting the hard drive.

  The machine didn't come with a disc for Windows XP, or a recovery CD (just a CD "tools and utilities"). I'm sure the drive HARD will be partitioned, and I can format the drive without such a disc.

  If this is true, how should I do?
  Thank you.

  Hello

  I can't believe that you do not have recovery media.
  The laptop must be supplied with recovery CD, Tools & Utilities CD, and WinDVD.

  But back to your question;
  If you insert a new HARD disk, you will need to use the Toshiba Recovery CD or the original CD of Microsoft Windows to install the operating system.
  The new drive is not partitioned HARD and doesn't have any OS pre-installed!

  If you n t have the original CD of Microsoft OS you can contact the service provider allowed in your country and you can order it.

  I hope I could help

  Good bye

• How to free space on the hard drive recovery disk?

  My J: drive (recovery) is near capacity after a reinstall of Windows 7. How to clear space on this drive?

  Hi John R H,
   
  The purpose of the training of recovery is to store all the files needed to do disaster recovery, when the system becomes unstable. The recovery disk is actually a partition on the hard drive of your computer - not a real physical disk. There is much less space than other drives. If you use the recovery disk to store files (such as backup files), the reader is full quickly and can cause serious problems when you need to use the system recovery.
  Note: Do not store files on the recovery drive. The only files on the recovery disk should be linked to a system recovery.

  Here's a post that addresses a similar issue. To resolve this issue, check the suggestion given in the post.

  Message "you run lack of disk space on RECOVERY (d :))".

• ProBook 6570b: drive bracket HARD and Windows 7 due to the failure of the HARD drive - now no Internet connection

  Hello

  I had to install a HARD drive of second-hand because of failure - 4 weeks out of warranty.

  I then installed an old copy of Windows 7 2009 I had no backup discs.

  My question is how to find the good network drivers on the HP site I've tried a few and they are no be accepted.

  The product ID is H5E77ET #ABU

  BIOS 681CE worm f.45

  S/no available if necessary.

  I hope someone can help as its my daughters machine and she needs for UNI.

  BTW - a number of other drivers appears to be missing like Ethernet and USB

  You are the very welcome.

  If you live in the United States or in Canada, please call 1-800-334-5144, to order a set of recovery disks.

  Have the serial number handy to give to the customer service rep.

• changed the hard drive. now, my OS is illegal?

  I've reconfigured the drives in my PC. This put a bow in systems jacket! It now says my copy is illegal, so I can't use the updates. When I get the COST I have LEGALY bought by Microsoft it claims the COA was previously used and is no longer valid. How can I prove that I already paid for my OS back to normal?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Re-installation of Creative Suite because of the hard drive crashed

  My hard drive crashed and when I tried to reinstall my programs adobe (Cs5.1 64 bit) he says that the serial number has been exceeded. Can you help me with this? I'm on a PC.

  Thank you, Jonathan

  Serial number and activation support (non - CC) https://forums.adobe.com/thread/2041990

• Reactivation after changing the HARD drive (can't use the phone)

  I hope someone can help. My HARD drive failed completely, and I adapted a new. I re iunstalled the Vista operating system which

  I bought 3 or 4 years ago and it activated OK online. I now get an error message asking me to buy a new key.

  as long as one I presented is attributed to another computer. I'm unable to use the phone as I am deaf so how

  can I handle this? Best wishes to you all, RegT

  Hello

  "Is already in use" error message in the activation, or similar, sometimes after a reinstallation on another hard drive, etc...

  Can you get help from a friend or relation to the activation of phone for you on your computer?

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How can I format / erase a partition vmfs on the HARD drive for later use by windows?

  Hi all

  I have a HARD drive to a virtual host formatted as a vmfs partition. I need to delete / erase this HARD drive vmfs partition because it will now be used in a Windows environment. Can someone explain please how can I remove vmfs partition so that it can be formatted in NTFS? Can be done in a Windows operating system like the current place of residence may have one easily accessible Linux or vmware?

  Thank you.

  vmTrekker

  Windows should be able to reformat a VMFS partition in the GUI. If this isn't the case, you can run the diskpart utility and erase the partition table on the disk.

  André

• Satellite P200-13Z - upgrade the hard drive - can I use SATA II hard drives?

  I have a Satellite P200-13Z with simple standard Fujitsu 120 GB SATA hard drive. I want to change this to a RPM SATA II 250 GB Western Digital 7200 RPM drive. This interface SATA laptop does support SATA II? Thank you very much!

  Not your portable computer does not support SATA II.

  However, you can buy the SATA II hard drive and put it in your laptop. Only way to get it going is to restrict the new speed of SATA HDD, I accelerate. To do this is to introduce a jumper on the drive to restrict it to SATA I speeds up. Once it's done put in your laptop and viola, it works.

  Good luck, but I would like to get a toshiba technician to install it if its under warranty. It's for your own good, so you don't turn your laptop into a boat anchor.

• Sometimes the mouse freezes while the HARD drive is in use

  Sometimes, the mouse freezes.
  When it freezes hard drive light flashes, usually hangs in the games, the games freezes often and then he works

  Hello

  I put t really understand what we should meet here.
  Please be so kind and post some info on your machine, pre-installed OS and detailed description a bit more on your problem.

• Windows 7 reinstall the suite of crush the HARD disk

  Dear friends,

  My drive (HP DM4-1160us) (product: XH124UA) was planted and I do not have with me recovery disk. Can you please help to reinstall windows 7 home on my laptop?

  My system details: serial number: [edited by moderator serial number], product: XH124UA

  Thank you

  Suren

  Hello:

  You can order a recovery media for your laptop by clicking on the link below, and then click to expand the line of order recovery media.  Then click on the blue button more details.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4308941#N8343

• Replaced the hard drive recovery disks don't work

  Had the HDD out on my laptop DV6710. Replace it with the exact type. Order recovery dvd from HP. When I try to restore using the first disk, I get the message "no media found. It is the second disc to the dvd player is ok. I changed the boot order and tried what other stuff I've read on this Board. Someone has an answer to help me? So, I would be very happy.     Thank you...

  Have you checked your model pilots page to see if there is a firmware for optical drive? Call HP and tell them that the laptop does not start the first disc... they will usually send a replacement set.

• Satellite L20-214 - isolate bad sectors on the HARD drive?

  Dear Sir

  My laptop fell off my table leading to serious hard drive problems. The hard drive now has some bad sectors that can be repaired with the chkdsk command. I managed to get my data on an external hard drive. Despite the bad sectors, I can reinstall it however from the recovery cd. Starting after that time consuming (1.5 hours) and after starting Windows I get the error messages from programs that cannot be started. It's the same thing after each reinstall. My guess is that the recovery disk writes data on the same spot every time both on bad sectors.

  I was wondering if theres a way to fix or even isolate bad sectors on the disk, so I can continue to use my laptop.

  Your help is very appreciated.

  Hello

  You can try HDD Regenerator 1.61 (HDD Regenerator is a unique program for regeneration of physically damaged hard disk drives. It does not hide bad sectors, it really restores them).
  However, the best way is to buy a new hard drive :)