Not be saved in the data base of page elements
Good afternoonI hope that it is a return of holiday brain cramp but I don't see the problem... I'm working on a help desk application and when a closed ticket is displayed, a button to reopen ticket. When the button is clicked: P5_STATUS_CODE should be replaced by reopened; P5_CLOSED_BY_KEY & P5_CLOSED_DATE must be null. the record must be recorded and the page redirected on itself.
I've created a submit after process (sequence 10) that updates the fields with a condition that it triggers when the button reopen ticket (APPLY_CHANGES).
Start
: P5_STATUS_CODE: = 'reopened ';
: P5_CLOSED_BY_KEY: = null;
: P5_CLOSED_DATE: = null;
wwv_flow. Debug ("P5_STATUS_CODE value = ' |: p5_status_code");
end;
Because the button to reopen ticket has a REQUEST of APPLY_CHANGES type, it triggers the process of update DML (sequence 30). Then the branches page on itself.
Looking at the record in the database, I see that the date of modification (engine database trigger) is correct but the status code and closed fields were not updated.
When I run the form with debugging, the process works and by the debug statement, the value of P5_STATUS_CODE is replaced by Reopened. Then the process of the DML is run. And finally the branch runs.
0.02: point of treatment: ON_SUBMIT_BEFORE_COMPUTATION
0.02: branch point: BEFORE_COMPUTATION
0.02: point of calculation: AFTER_SUBMIT
0.02: tabs: make the connection for the tab queries
0.02: branch point: BEFORE_VALIDATION
0.02: perform validations:
0.02:... Point Not Null Validation: P5_SITE_KEY
0.02:... Point Not Null Validation: P5_PEOPLE_KEY
0.02:... Point Not Null Validation: P5_TRACKER_KEY
0.02:... Point Not Null Validation: P5_ASSIGNED_TO_KEY
0.02: branch point: BEFORE_PROCESSING
0.02: point of treatment: AFTER_SUBMIT
0.02:... Process of "reopenTicket": begin PLSQL (AFTER_SUBMIT): P5_STATUS_CODE: = 'Reopened '; : P5_CLOSED_BY_KEY: = null; : P5_CLOSED_DATE: = null; wwv_flow. Debug ("P5_STATUS_CODE value = ' |: p5_status_code"); end;
0.03: P5_STATUS_CODE value = Reopened
0.03:... Treat "process line of the POST": DML_PROCESS_ROW (AFTER_SUBMIT) #OWNER #:TICKET:P5_KEY:KEY | IUD
0.04:... Do not run the "reset page" process, treat the point = AFTER_SUBMIT, condition type =, when you press the button = DELETE
0.04: branch point: AFTER_PROCESSING
0.04:... Leadership assessment: AFTER_PROCESSING Type: button 'REDIRECT_URL': Branch (key no.): ASK
0.04:... Leadership assessment: AFTER_PROCESSING Type: button 'REDIRECT_URL': 1820524144021869 branch: (Unconditional)
I tried to change the source used on the fields still only reach and that didn't work either. Does anyone have a hypothesis as to why the fields I'm reset are not saved?
Thank you
Ray
If the box is not displayed then the items are not part of the subject page and will not be part of the automatic DML. Try creating another process sequenced after the automatic DML. This process must be a simple update statement updating these columns in your table.
Tags: Database
Similar Questions
-
Original title:
Error message
I use windows 7 laptop I format. After installation of Microsoft, accounting software and I wanted to backup restored it gives me error massage "can not connect because the version of the application is older than the data base of the company.» Up grade the application. " Eventhough I used the software even before I format the computer laptop and does ' t give me the options to upgrade. Need help.
This means MS accounting requires the latest updates that have been installed originally creating this accounting database
Accounting MS was abandoned a few years previously, so updates are not driven by windows/office update
-
When trying to download an update, I got all first: "there was any problems searching, download or installation of this update. "Firefox could not be updated because: no data has been received (please try again)" he also gave a link to download manually. When I tried the site in Firefox, I got: 3.6.3 (2).dmg.part /Users/(deleted for privacy)/Desktop/Firefox could not be saved, because the source file could not be read.
Try again later or contact the server administrator. I tried this 3 times.
This has happened
Don't know how many times
Is around 11:00 central time Mon, 17 May 2010
This means that the file cannot read because he was interrupted while downloading. Try to download again
-
Unable to save the Page as that received the error "... ga.js could not be saved, because the impossible source file read try again later, or contact the server administrator.
You have installed the Ghostery add-on or something similar?
It can block Google analytic and .js file could not be read. -
error message "coordinates would not be saved" when the contact info is correct.
original title: error message
"contact information could not be saved" when the contact info is correct. Happens all the time on this computer
You will need to create a new post on the Windows Live support for assistance site: http://windowslivehelp.com/forums.aspx?forumid=28aff142-9106-4d74-be08-9b5d9fc0efea
-
I tried to play Solitaire on my Dell computer and I get the message to turn on my hardware acceleration. When I do that, I get the message, "the new settings could not be saved to the registry. Help! I have Windows Vista 32-bit Home. I even installed a new video card driver.
Hi PennyKnight
1. What is the number of the model of Dell computer?
2. you download and install the latest driver on the manufacturer's Web site?Method 1:
I suggest you to use the services of troubleshooting and to check if these help solve problems-
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter
Method 2:
You can check if there are errors for the display device in Device Manager. Please refer to the below steps.
a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b b.. in Device Manager, look for the device and then right click on the name of the device and go to properties.
c. now on the general tab, check the status of the device. Let us know the status of the device. Also you can inform an error code with the State.I hope this helps.
-
Original title: photos
If I try to crop a photo or repair, it has a message of: changes made to this photo has not been saved. The file may be read-only or you may not save to the location of the image.
They worked very well the other day, what's past?
Hi boneyardwolf,
1. where are the photos?
2. you have any third-party photo editing software?
3. what type of files you want to change?
You can check the following link and try the steps suggested by Marilyn - Support Engineer Moderator Wednesday, March 4, 2009 04:47 and see if it helps to solve the problem
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit ourMicrosoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
To get this message when opening Word 2007.
Your AutoCorrect file, (Japanese weird character? with) MSO1033.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.
ALSO when I try to close or save a Word 2007 I get this message:
Word cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected, or damaged. (C:\Program Files\... Normal.dotm)
I then click on Cancel to not save the changes and then get the following message appears:
Changes have been made that affect the model overall, Normal. You want to save these changes?
I click No. in addition to this I'm currently not able to print from word 2007 older that I created a few months before this problem started
I studied that went through all the troubleshooting steps suggested Microsoft to resolve this issue, but have had no luck... any other help or suggestions would be appreciated. I'm not
Thank you!!
Frustrated in minutesInstall the fixit from article KB2258121 (fixit #50461).
Although this problem is not mentioned in the KB problem, the fixit indeed solves this problem.
-
Dear administrators,
I created the user but now I have a requirement for the granting of privileges to view all objects in the DB in the data base and discovers the DOF for each.
Any help please
Ritz
Thanks to advise all the
-
Hi all
We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.
In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.
Thank you
Roshi
Two things:
-I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings
2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028
2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...
2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...
2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.
2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file
2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file
-Then export again and review. DAT file in the Outbox folder. Is it empty?
-You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression
-Import, validate and export data
-
FDMEE of planning data loaded successfully but not able to see the data
Hi all
We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.
In import format, we have not mentioned hsp_rates, it's that whole issue?
If we have different currencies, where we must define?
Suppose we have INR, USD and GBP if I want to load the data of INR, where we define?
Thank you
Praveen
Problem solved
I've made changes in the import format now I am able to see the data in the Planning Application.
Thank you
-
Not enough space on the data store
I created a VM w2k8 server. I have attached a second virtual drive to it in the vsphere client determined I gave him too much space. I went back in the vshere client and click on delete. Now, when I go to add a second drive with the right amount of space I want t use I get error not enough space on the data store. I noticed that the old file vdmk still exist but do not know how to proceed. It is a 5 ESX environment and the data store is on the SAN. Space on the windows server is listed as unallocated.
Hello and welcome to the community of VMware. Well I would like to browse the data store and make sure that there are no vmdk files sitting here that, if the other wise not to be there. Have a go at this and feedback your conclusions.
Best wishes.
-
Update 4.1 to 4.4 Lightroom I get this message - LS11_win_4_4.exe.part could not be saved, because the source file could not be read.
Hello
Please uninstall Lightroom 4.1 and then download the latest version to install. It should work.
Kind regards
Abhijit
-
ADF is intended for the data base designed with vertical diagram?
Hello
I want to know if ADF 11 g is intended for the data base designed with vertical scheme where even the names of columns will be stored in a generic table?
Thanks in advance.
Published by: user8925296 on April 12, 2010 10:06The short answer is no...
What do you call a 'vertical plan', it's what others have called for a schema of entity-attribute-value or universal data model. I advise you to do some research open minded on these types of patterns if you develop an application before continuing. Great sound in practice, they have very inherent ease of use and scalability problems. [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2314483800346542969] This could be a good starting point...
John
-
I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you
Hello
could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.
Let me know if it works
Maybe you are looking for
-
Documents, data and 'others '.
On a totally restored 32GB iPad 9.7 Pro I note there are GB 26,11 likely the ~ 6 GB is taken up with the free operating system, however it y 41.8 MB of data & Docs and 403,5 Mo 'Other' also be caught up. What are these Docs, Data & 'other '? Thank y
-
Qosmio G20 154: not all digital channels under MCE
Anyone know why under MCE not all digital channels are tuned, all using the Cyberlink Cinema Manager all channels are tuned regularly?Thank you Enzo-ita Skype
-
Motorcycle G 3rd Gen does not load on
Hello After the update of correction Stagefright, the Moto G 3rd Gen does not load on, I have to disable in order to load it. Edit: the problem occurs when the device has reached the red mark.
-
When I opened recently to manage Applications on my phone, I have a list of installed applications or running applications. This is display by default, no filter. They that all seem to be able to uninstall. Most of them are apps I downloaded or famil
-
Write to the spreadsheet control limits 20 columns
Hello I use LabView 8.5 and an SCXI USB module for data collection. I'm working on a program that reads in four channels of temperature and 20 channels of voltage by using two separate loops, then I concantenate two signals in order to write the data