Not enough memory is available to complete this operation

Similar Questions

• Download "not enough memory is available to process this command." When installing umdf.exe

  Hello, I tried to configure this file umdf.exe

  but this error pops up: "not enough memory is available to process this command." "The installation did not complete.
  There is a lot of memory and disk space
  So could someone tell me what to do?

  Hello

  Follow these steps to get the fixed number.

  First copy umdf.exe of "wmp11-windowsxp - x 86 - enu.exe" on your desktop, two methods:

  (a) decompress wmp11-windowsxp - x 86 - enu.exe (ex: with TotalCommander-> Alt + F9) and copy umdf.exe on your desktop

  (b) run the wmp11-windowsxp - x 86 - enu.exe (if you run it will extract the folder folder)
         
  Click Start-> Run-> %Temp% [ENTER]
  Press F3, and then search for "umdf.exe".
  Copy this file to your desktop
  Cancel the installation of WMP11
   
  Rename the following files, it just copy & paste into your command prompt:

  Rename C:\WINDOWS\system32\drivers\wudfrd.sys test_wudfrd.sys
  Rename C:\WINDOWS\system32\drivers\wudfpf.sys test_wudfpf.sys
  Rename C:\WINDOWS\system32\wudfhost.exe test_wudfhost.exe
  Rename C:\WINDOWS\system32\wudfsvc.dll test_wudfsvc.dll
  Rename C:\WINDOWS\system32\wudfx.dll test_wudfx.dll
  Rename C:\WINDOWS\system32\wudfplatform.dll test_wudfplatform.dll
  Rename C:\WINDOWS\system32\wudfcoinstaller.dll test_wudfcoinstaller.dll [ENTER]

  Now run the umdf.exe and reinstall it. After that is finished, connect your phone and your MTP problem is solved.

  Bravo!
  Santosh Narayan

• Including error 'not enough memory is available to process this command "?

  I downloaded the Xinput for Microsoft Common Controller (64-bit) driver, so I could plug my Xbox 360 wired guitar on my computer. When I ran the program I got a message error that says "not enough memory is available to process this command", followed by another that says "installation did not complete. So I checked the C: drive, thinking it was kind of full, but he had 129 GB free. No idea why this didn't happen and how am I supposed to install it now?

  Hello

  What is the brand and model of the computer?

  I suggest you to clear temporary folders and check if it helps, here are the steps:

  a. Click Start, type % temp % in the start search box and press on enter.

  b. press the ctrl key and A, which will select all content, and then delete.

  Once you disable this, follow these steps:

  a. Click Start, click computer.

  b. open the C drive, go to the Temp folder and delete all the content and check if it helps.

  I also suggest you to download and save the Xinput for Microsoft Common Controller (64-bit) driver from the link below on the computer:
  http://www.microsoft.com/downloads/details.aspx?FamilyID=d6289d8d-2478-4bf1-984c-56ffb828ba4e&displaylang=en&Hash=HQBo8olwQYkDM%2bRImauH7TXbbEwUfLeDhQ2lrUQS2fJcvO2FOgsBL0MKLTzmUwGwRodDBWY5s%2fKpKaOV%2bNuhcQ%3d%3d

• try to install KB942288, get - message "not enough memory is available to process this command."

  KB942288 installation, get message "not enough memory is available to process this command."

  What storage speak?

  See...

  Windows Vista Help: Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

  Then...

  Open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  Vista Service Pack 1 (SP1) or SP2 installed?

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP logon message... system couldn't open session... not enough memory is available to process this command.

  Windows XP has just received the last update.  If a user is logged on cannot pass between users because when do you a pop up and States opening message... "" the system could not log due to the following error: not enough memory is available to process this command "."

  -Have concerts and gigs of free hard disk space
  -Currently 2 GB RAM
  -He just started this
  -The system does not allow more than 1 user at a time to log in now
  -If you try to connect more than 1 user, it displays the error message and cannot connect again, even not the original user, you must restart the system.

  So what's happening?  Is it a mind foopah the latest patch XP?  Why can't connect more than 1 user on?  I used to be able to connect the whole family and switch between users!

  Remove your antivirus (Norton, Bitdefender 2010, etc.) and try to connect again.  It should work.  Then download Microsoft Security essential Microsoft and you shoul be ok.

  Vitin

• nlsdl.amd64.exe error 'not enough memory is available to process this command. "

  Hello

  Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."

  I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.

  What can I do to solve this problem and continue on this tutorial?

  Here's what I'm working with on professional W7 X 64.

  Add the Support of Board multilingual user in an Application

  Microsoft National Language Support returned APIs 1.0

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Installer corrupted Windows - not enough memory is available to process this command error prevents me to update.

  My installer of Windows probably corrupted, as it gives the "this installation package cannot be opened.  "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package" message during the installation of some programs.  I'm now using Windows 7, but the problem has been around for my Vista installation.  I am unable to do a clean install of the operating system that didn't record because I bought 7 through the Win741.com agreement.
  In addition, when I try to update Windows install, I get the message error "not enough memory is available to process this command."

  I tried several things, like the safe mode, the command msiexec \regserver (maybe wrongly?  "He wouldn't take it without space), and nothing works.  I guess I should add that I tried it works as an admin too, given that always gets mentioned - and probably should be.  Help?

  You are welcome to help.

  To exclude a problem with your user account can you try an another user account with administrator privileges (create one if nessary) and then try to install the applications of this account.

• MMC 3.0 install error on Windows 7 "not enough memory is available to process this command."

  I try to install MMC 3.0 (Windows XP-KB907265 - x 86 - ENU) on a clean windows system 7 (4 Gig of RAM and 150 GB disk space available)

  I get the error "Not enough memory is available to process this command" which is obviously not the real problem.  How can I install it?

  I already uninstalled my Virus Scanner, but that did not help.  So now, I'm looking for another solution.

  is the other version of the MMC 3.0 for Windows 7 because I can not find a.

  Windows 7 already includes MMC 3.0, there is no need to install it. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Error: Not enough memory is available to process this command

  On one of our servers running Windows 2003 SP1, CFMX 6.1 (6,1,0,83762) we get the following about every other day.
  "Not enough memory is available to process this command." The message only appears on one of the .cfm pages and other .cfm pages are stillaccessable. We have more than 2 GB of available disk space and 1 GB of RAM so I don't think that either of those who are the problem. In order to solve the problem, I just stop/restart CF and then everything works OK. The only thing I know that has changed with the server in recent weeks, it is that the following MS Patches have been installed: MS06-013, MS06-014 and MS06-015.
  
  Is anyone of another experincing the problem and if so, what is the solution. I realize that I could always uninstall patches, but wanted to know if there is another solution before that.
  
  Thank you

  It seems that my problem was related to client variables fills the register. Once I cleaned out the registry usigng the following technical note variables the application worked fine.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17881

  I also installed a client patch for variables.

  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=b3a939ce, "Hot".
  fix for client variables (Article 19590). »

• could save bitmap for computer - not enough memory or resources to complete the operation.

  Save the bitmap for computer... always achievable by this message:

  There is not enough memory or resources to complete the operation. Close some programs and try again.
  .. was even trying to record on a blank disc of flash 8Gb and still does not work... Please help

  Hi Janey,

  ·         Do you get the error when you use MS Paint application?

  Check to see if the following is useful.

  Method 1: Perform a disk cleanup and then try to save the image.

  Description of the tool in Windows XP disk cleanup

  Method 2: Log a user account different to check the issue. If you do not have any user account then the create and check for the issue. Report of the results.

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.

• MS Paint build upwards: not enough memory or resources to complete the operation

  I call this iguana impressive in the painting and I wanted to color. I decided to go for a black and white look and configured settings and chose the black and white, to give me the white instead of color.
  I zoomed to 300% zoom, white selected as color 1 and the third from the right in the second row color 2. Then, I selected the Eraser tool and started colouring the white background on the iguana by using the right button of the mouse.
  I tried several times and each time after about 30-60 seconds MS paint show me this message:

  There is not enough memory or resources to complete the operation.
  Close some programs and try again.

  When this happened, I checked the task manager that I couldn't understand something like that was the case. Apparently, I was using only about 60% of my 2 GB of memory, mspaint.exe using somewhere between 9,000 - 14,000 K according to the Task Manager.

  I tried to open a new mspaint and redo the same thing as above designated: zoom 300%, black and white, Eraser, white as color 1, which other than 2 colors right click, paint using the eraser: after some time, same result.

  What is going on?

  I use an Eeebox EB1012 with 2 GB of RAM, double heart Intel Atom 330, Win7 (naturally)

  EDIT: If this is not clear enough: ms paint would not react after the above mentioned message was posted and I had to end the process using Task Manager.

  Hi DrenchedIguana,
   
  
  Let us try the following workaround and check if this helps us solve this problem.
   
  Method 1.
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Let us, make sure that all instances of MS Paint are closed before performing the following operations:
  1. click on start, run, type regedit, and click OK to start Registry Editor.
  2. navigate to this key
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Paint
  and remove the key from the paint.
  3. exit the registry editor and restart the computer.
  4. start the paint to see if your problem has been resolved.
   
  Method 2.
  If the problem persists then I recommend that you create a new user account and check if the problem exists. If the problem is resolved in the new user account, I advise you to fix the corrupted user profile.
  Difficulty of a corrupted user profile 
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• MapViewOfFile: Not enough memory is available to process this command.

  Hello
  
  Has tried to insert documents and questioning at the same time. This mistake has not happened before.
  

  MapViewOfFile: Not enough storage is available to process this command.
  
  PANIC: Not enough space
  com.sleepycat.db.RunRecoveryException: DB_RUNRECOVERY: Fatal error, run database
   recovery: MapViewOfFile: Not enough storage is available to process this comman
  d.
  
  PANIC: Not enough space: DB_RUNRECOVERY: Fatal error, run database recovery

  Here's how my environment is configured:
  

  public void setXmlEnvrionment()
       {
  
            try
            {
                 //File envHome = new File(properties.getProperty("DATABASE_LOCATION"));
                 File envHome = new File("");
  
                 EnvironmentConfig envConf = new EnvironmentConfig();
                 envConf.setAllowCreate(true); // If the environment does not exits,
                 // create it.
                 envConf.setInitializeCache(true); // Turn on the shared memory
                 // region.
                 envConf.setCacheSize(100* 1024 * 1024); // 100MB cache
                 envConf.setMutexIncrement(22);
                 envConf.setMaxMutexes(200000);
                 envConf.setMaxLocks(200000);
                 envConf.setMaxLockers(200000);
                 envConf.setMaxLockObjects(200000);
                 envConf.setInitializeLocking(true); // Turn on the locking
                 // subsystem.
                 envConf.setInitializeLogging(true); // Turn on the logging
                 // subsystem.
                 envConf.setTransactional(true); // Turn on the transactional
                 // subsystem.
                 
                 // envConf.setTxnNoSync(true); // Cause BDB XML to not synchronously
                 // force any log data to disk upon transaction commit
                 envConf.setLogInMemory(true); // specify in-memory logging
                 envConf.setLogBufferSize(60 * 1024 * 1024); // set logging size.
  
                 envConf.setLockDetectMode(LockDetectMode.DEFAULT); // Reject a
                 // random lock
                 // request
  
                 myEnv = new Environment(envHome, envConf);
                 System.out.println("Environment created...");
            } catch (Exception ex)
            {
                 ex.printStackTrace();
            }
  
       }

  No idea how to solve this problem?
  Thank you very much! :)

  Hello

  PLS, try to run without snapshot. Remove the following line:

  txnConfig.setSnapshot(true);
  

  If you want that the snapshot. Enable setMultiversion in ContainerConfig.

  Thank you

• "Not enough memory is available to process this command."

  I borrowed a friends "Age of Empires III" (I don't want to "try" before I "buy"), but I can't seem to load. I am running Windows 7, and when it runs the windows installer, I get the above message. I controlled via the Microsoft Web site and found that this is usually attributed to the key "IRPStackSize". I tried to add the value of suugested but still no joy. Can anyone help please?

  Hi Lumpyspiv,

  For a problem similar to yours, check the wire below the age of empires community forums, where he deals with everything to uninstall and reinstall the game age empires using the Windows install cleanup.

  http://Forum.AgeCommunity.com/forums/thread/685284.aspx

  And also post your question in the age of Empires Community Forums or games for Windows community of links below, respectively.

  http://Forum.AgeCommunity.com/forums/ Age of Empires Forums

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx games for Windows

  I hope this information helps you!

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "not enough memory is available to process this command" - xbox 360 controller + sony walkman

  I am trying to install drivers for my controller Xbox 360 for PC and my sony walkman. The Xbox controller is not wireless, Wired. I'm running on windows Vista 32 bit and I can detect both drivers in the Device Manager section, but both of them say that there is no driver installed since then. When I plug the USB to connect to the computer, it comes up with the error in the title. All service packs are up-to-date. Any help?

  in the light of other errors, I decided to clean up my PC and rebuild, and now the drivers are working properly, as well as the rest of it. I want to thank you for the help that you have demonstrated and your commitment to help me, which is more that I can say for most companies and suppliers, I tried.