Not strictly a Sansa problem, but thought that I ask...
Hello everyone - so I get over my problems of initial start-up (for my PC to recognize my 8 GB Clip in MTP mode) and now it works a treat (volume seems very low even at the maximum setting but have read the threads to get a good seal on your headphones and is also considering an amp... so I'll persist with the great wee device).
In any case, am in WMP 11 and fortunately to create playlists for the gym on my Clip. one for MON, Mar, sea etc (you get the idea) so I have 5 playlists. I decided that I might want to go to the Gym on Saturday, so I create a new playlist like before and what happens to my first playlist (MON)? ... that he disappeared. I panic - other major titles in exactly the right order and timed to coincide with my routine, so I quickly remove the 6th reading list and the first that comes up!
So I guess that's probably a question of a Microsoft forum, but everyone is a limitation like this in WMP 11? Is there an option or a place setting that allows the PlayLists more than 5! Will I be greedy? Is a legendary esign limitation in a Microsoft Product, I've often heard tell of...?
Thank you very much for any answer and once again, sorry - I know that this isn't a matter of Sansa/SanDisk as it happens before you go anywhere near try to sync to the device.
Greetings to all,
Jim.
Thanks Doc! I guess I should, but I don't feel too bad... that's really not intuitive; Looks like they would build just the list of the LHS. In any case - panic over and PlayLists for Sat & Sun (as if!) now in place!
Thanks again - good aprecaited.
Jim.
Tags: SanDisk Sansa
Similar Questions
-
Hi, I thought that I ask here because I can't seem to find it online.
I use Lightroom 5, and before my sliders temperature would be as follows:
-100-100 blue yellow
-100-100 Green magentaFor some reason, now the blue to the yellow scale is from 2000 to 50000. Magenta to green is always the same.
Can someone help me solve this problem? I literally have no idea what to do!
Now you shooting RAW files.
For JPG and TIFF, the two scales are-100 to 100.
For RAW files, the Temp is 2000 to 50000 and the hue is-150 to + 150.
-
New York requires the fulfillment of its RP-5217-PDF form for all real estate closings. The form automatically generates a bar code. My office uses Apple/Mac computers and the barcode appears in all versions of Adobe Reader and Acrobat Pro before DC. DC watch version the form without a bar code. The form is available here: https://www.tax.ny.gov/pdf/current_forms/orpts/rp5217.pdf is there a preference setting in DC that I'm missing, or is broken for the most recent version of the Adobe on a Mac? Help, please.
I thought it was resolved in the continuous version of Acrobat and Reader, but maybe not... You can report the problem here: feature request/Bug Report Form
A workaround would be to upgrade to XI player for now. I agree this is a major issue and hope Adobe will solve it soon.
-
Why do software that does not work? tried to download photoshop 13 hours later at 55%, he stopped and will not re-start. then gave the error code 109 says no connection, but there is no problem, and the 1 TB hd and empty so what's the deal?
Please visit: http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
Alternatively, you can try to download direct download links provided at: http://prodesigntools.com/adobe-cs6-direct-download-links.html
But make sure you follow the important instructions on the page before you start the download.
-
I have not forgotten my master password - but the app kept asking for it
I'm not change the question that your site does not "understand" - I wrote it down and so far the application (?) did not offer to remember what it is.
There was a time before I installed the Version 12 - when I was ASKED if I wanted to remember - everything you are asked is my master password
I recently became a user of FF12 and I also have Personas and Personas Manager - but that sometimes fails to work and it does not change the image - then I have to CONNECT all over again
Any advice would be welcomed and received with gratitude
Patricia Francis-Wilson aka patriciaenoladon't worry too much for the little things, I'm happy that you solve.
Thanks again
-
Scrapbook is more visible to me and click Open. When I watch my modules, scrapbook is visible and I have an option to remove. Therefore here... but I can't. Where should I look?
Hello
Please try pressing Alt. This would temporarily allow the menu bar. You can also try to activate the Add-on bar via View (Alt + V) > toolbars or right-clicking the + after the last tab. And click Customize... to drag and drop Scrapbook icon to the toolbar.
-
Screen does not light after the start, but after standby on Satellite M100
Hello
I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.
The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.
Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).
From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.
What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.
When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.
I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.
Any help would be really appreciated!
Best,
Hi guys
I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
In addition, you must make sure that all available MS fixes and patches have been installed.Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.
Good luck
-
I need someone to walk me through how to get Photoshop to recognize cc I downloaded the plug 9.1 raw in. I thought that this would happen automatically, but it has not changed in photoshop. I ran the installer for the plug in but it didn't ask me what to do next. The responses I get are all over the map on this so I'm writing again. the wording of the question differently.
There was some problems with loading 2015 ACR 8. You may need to reinstall Photoshop. Which seem to help a lot of people.
-
Not sure if there is an error or a breach of security on my system, but my Mcafee Cox Security Suite client will say sometimes randomly the Parental control has been disabled, and the network firewall and Internet has been disabled and must be fixed. When you click on fix, the problems will go away, but sometimes the Protection status check will reappear do later me wonder if someone attempts to access or attempt to take control of my computer in some outside way. Using Windows Defender and Mcafee Viruscan I found nothing so far, however in one file past a Nakido.exe was found and attempted to remove, it is no longer, but I seem to always be able to find traces of the file on my computer, which makes me wonder if the Trojan horse still has limited access to my computer and try to manipulate items and just has not been detected yet.
Try to contact McAfee Support for assistance. But before that try one of these:
(1) Windows Update
(2) try to install the latest Service Pack
(3) ensure that your compatible version installed in Windows otherwise (ask McAfee upgrade option to the compatible version) -
I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I already had a free annual subscription to cc through my new canon camera, but I installed for my mac already. No phone number to call, adobe contact to say amazon, what do I do?
start at the top and work your way down to apply applicable patches until your problem is solved.
If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
If your error is:
"Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.
first of all, rename folder OOBE OOBE.old.
to find the OOBE:
Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE
Win 32 bit OS: Program Files \Common Files\Adobe\OOBE
Mac os: HD > library > application support of > adobe > caps
Mac os: USER > library > application support of > adobe > OOB
If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
If you use an installation dvd:
Copy the contents of the drive in a desktop folder and install from this directory.
If you are using a mac:
1. try to create a new user account in Mac with administrator privileges.
2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the
3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.
4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.
5 restart the installation.
If everything is applicable above fails, check your Setup logs:
http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html
-
I was going to pay for my monthly plan, but for some reason any, that I couldn't find my plan, then automatically right, I thought it had been deleted since I did not pay for my plan in due time. So I made a new plan, but now that I paid for my monthly plan twice, and well, it sucks a bit... So what to do? And can I get my money back?
For assistance, please contact our support staff:
-
I buy Photoshop elements 11 about a year or two he y a. thought that I had saved, but I did not. How can I download and reinstall. I have my serial number. Thank you
Hi Nick,
Please use the following link to download and install Photoshop elements 11:
Download Photoshop Elements | 10, 12, 14, 11, 13
See also, find the serial number of your product Adobe quickly
Kind regards
Bani
-
I downloaded ps CC and CC bridge but camera raw has no load up automatically. I tried to download Camera Raw 6,7 Adobe, but it is said that this camera raw does not apply to me. Any thoughts?
HI JohnnyFinley
Photoshop and Bridge CC includes the latest camera raw Plugin 9.1.1.Camera gross 6.7 does not work with CC products.
You should be able to see the camera raw version 9.1.1 if you have downloaded the version of Photoshop CC 2015
Alternatively you can manually download Camera raw here install plug in Camera Raw
Concerning
Assani
-
IM creative cloud membership payment (one year), the first month I had no problem, but a few days ago I received a message from the Manager of adobe applications saying that the address I have penetration is not correct, but on my Bill all its fine, is at the same address I have income in the first pay period of this one.
Can you help me?.
Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html
-
You asked Firefox to connect to www.gmail.com, but we cannot confirm that your connection is secure.
Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
What should I do?If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.
This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.
www.gmail.com uses an invalid security certificate.The certificate is not approved, because no sender string has been provided.
(Error code: sec_error_unknown_issuer)
Well, these aren't real site certificates, they are signed by a different transmitter, apparently your VPN. In order to trust with your VPN as a certificate issuer, you need to import another certificate, the signing certificate.
In Internet Explorer, you would an expert this certificate to the REB/DER format, and then in Firefox you should be in the References, not the servers tab tab, the display of the certificate. After that, the false certificates signed JuniperSSL will be considered valid.
At least that's what's supposed to happen.
Maybe you are looking for
-
Ive had my macbook pro 13-inch retina for 2 years now and ive never had any problems. But recently the trackpads low corners left and lower right have been sticking. They still work, but I put a little more pressure on clicks or to use the middle of
-
Updated shut off - multiple and do not take installs same update
Windows Vista Ultimate EditionHave installed "update of security for SQL Server 2005 Service Pack 3 (KB970892) nine 9 times, all marked as successful, and I have Setup and downtime in my stop icon - icon which when I try to do just my computer hangs
-
My ASPIRE V5 - 552P card WiFi Upgrade
Hey guys. I have an Acer Aspire V5 552P - X 404 with Windows 10 x 64 instaled. I am trying to replace the card supplied with the laptop (Atheros AR5B22 PCI-E) wireless with a card that has AC wireless cabability I found on Amazon (Azure Broadcom BCM9
-
limits to XP home drive mapping
Hello We use XP home as our main computer and we have 5 workstations that need to map a drive to the computer main XP Home. 4 the computer can connect, but when that 5th try to connect it says that the computer is already at its max connections and t
-
USB driver for windows 7 for SW3
How can I connect my SW3 to my windows 7 PC. Windows cannot find drivers and neither can I! I wanted to check if there are updates of the software SW3 and he told me to connect to my PC (the reason is that I wanted to see if sleep followed is still