not supplied by windows 8 Messaging Instant messages in Skype

Similar Questions

• Could not restore due Windows error message

  Hi, when I turn on the computer I get the message 'launch Startup Repair' and 'start windows normally '. I tried the option and the option of repair, I always get to a starting point when the screen gives a message: "the installed program cannot start. Click OK to turn off the computer.

  In the option "Start windows normally" it stops with a blue screen with white wrote in telling me that he stopped boot to protect the computer.

  I also pressed F8 for system recovery, and which also stops with the same message as the repair option message that I mentioned above.

  What are my options to get this phone working properly again?
  I look forward to an answer soon and thanks.

  Martin

  Hello

  BSOD code, you get exactly if you try to start Windows normally?

  In any case, if the disk HARD recovery doesn't work, you should try it with the Toshiba recovery disc. You only have to boot from that disk and follow the instructions on the screen. Windows will install and you get back to factory settings.

  Don t forget that the whole HARD disk recovery disk wipes then backup your data first!

• My business have a "365 - account" and I can't apply our account office (Lotus Notes) for the Windows 8 messaging application.

  .. .it comes back with '... ". email or password is wrong... »
  Make our administrator to do something with the "365 setup?
  The mail on Iphone og andriod app runs very smooth - with our Lotus note
  Hope you can help me :-)

  You should post your question in the forum Office 365:

  http://community.office365.com/en-us/forums/158/t/56583.aspx

• Why the window again message will not come to the top? (Write, answer, forward)

  As I upgraded v38, I can receive and delete mail, read mail after right click on the name of box mailboxes to open in a new window (used for the mailbox just left click), but not compose a message, reply or forward. No error messages, but nothing happens when I click on write, answer or next button. I'm on Win7HomePro. That is what it is? Thank you!

  OK, I downloaded a new copy and it seems that if I am OK now - at least, the window again message happens again.

• I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  How can I fix it so I can delete unwanted programs? I try to open most of the icons in my control panel, I can get the message: application not found c\windows\system32\rundll32.exe.

  Please press Crtl + Alt + Delete key on the keyboard. Now, you will get a new manager called tasks window.

  Now, please hold down the CTRL key on the keyboard and click file, new task on the Task Manager.  Now, you will get a new black window. Copy the following and paste it into the black command window and press ENTER. Restart the computer.

  Assoc .exe = exefile

  Assoc .lnk = lnkfile

• XP to Vista upgrade, the message that Vista is not compatible with Windows XP

  Original title: Upgrade Vista XP

  I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?

  Hi Dennis,

  The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista

  Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• Message appears in the corner of my office: "you may be victim of software counterfeiting. This copy of windows does not pass genuine windows validation. »

  How can I remove "ask for authentic" microsoft in my computer software?

  It shows a message to the right down corner of my desk that says "you may be victim of software counterfeiting. " This copy of windows does not pass genuine windows validation. »

  "Once you install a Windows operating system license 'authentic', the" ""you may be victim of software counterfeiting " notification will disappear.

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• "The Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image" Windows Live Mail - Error Message

  When you use Windows Live Mail, whenever I try to open an e-mail that I receive the following error message: the Application or DLL C:\Windows\System32\dwmapi.dll is not a valid Windows Image.  What can I do about it?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• System32\secuload is not a valid Windows image error message.

  Whenever I start my PC, I get the following error message. "The request on the DLL C:\\WINDOWS\system32\secuload.dll is not a valid Windows image.  Please check this against your installation diskette. "I usually get 20 or if these and I have to click OK to allow the program to move forward.  No idea how to solve this problem?

  Hello

  ·        When I get this error message every time that you open any program or randomly?

  secuload.dll is a charger of security belonging to Tenebril Security Loader of Tenebril Inc. non-system processes like secuload.dll are created from the software you have installed on your system.

  Method 1:

  If the program loads at startup and then, I suggest you to disable this program from loading during startup. Follow the steps mentioned below.

  ·        Click Start and click Run.

  ·        Type msconfig.exe in the run box, and then press ENTER.

  ·        Click the Startup tab and look for the program.

  ·        Uncheck the box located next to this program and click apply and then click Ok.

  ·        Now, restart the system and check if the problem persists.

  Method 2:

  It is perhaps the application is corrupted. I suggest to uninstall the program and then install it on the system and check if the problem is resolved.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Unable to find saved emails and error message "content of this message is not found ' in Windows mail

  Original title: How can I find backup Windows Mail e-mail files that are now gone?

  How to find Windows Mail registered mail files that are now gone? My business is done mainly by e-mail and I save each citation in the e-mail to the client file. When I return to open the mail it says "content of this message is not found." Windows mail. How can I recover these files?

  Hello

  You can perform the following methods and check if it solves the problem.

  Method 1: Rebuild the Windows Mail message store

  This method will help you rebuild the message store. By rebuilding the message store, only the messages that have no errors cannot be loaded and delete messages that contain errors.

  To remove the Windows Mail message store file and then rebuild, follow these steps.

  Look for the message store

  For Windows Mail, by default, the data is stored in the location C:\Users\\AppData\Local\Microsoft\Windows Mail
  Check if the data is present in this folder. If it is present, you can import the data into Windows mail.

  i. open Windows Mail by clicking Start , all programs, and then click Windows Mail.
  II. click on the file menu, point to importand then click Messages.
  III. click on Windows mailand then click Next.
  IV. make sure import mail from a windows mail store directory is selected, and then click OK.
  v. click Browse, find the folder of windows Messaging (C:\Users\\AppData\Local\Microsoft\Windows Mail) you copied to this computer and then click on the file once to select it. (Do not open the folder when you select).
  VI. click Select a folderand then click Next.
  VII. click all folders to import all the folders, or click Selected foldersand select which message folders you want to import and then click Next.
  VIII. click Finish.

  Method 2: Virus scanner

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link to download Microsoft Safety scanner on the system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information.

• Windows Live Mail could not be started. The application could not open the Windows Live Mail message store error code: 0x800C0155

  Origianl title: windows live does not open

  My Windows Live Mail has recently stopped working, by double-clicking on the desktop icon top of page does not open the program, appears it the "Windows Live Mail" logo and then a message saying:-"Windows Live Mail could not be started. The application could not open the Windows Live Mail message store. Your Windows Live Mail mailbox is currently being used by another program, such as a virus scanner. close the program or wait so he could complete its operation, then open Windows Live Mail again. (0x800C0155).

  I tried to reinstall WLM, restore my computer, remove anti virus protection. Nothing works

  Help, please!

  Hi B Clinton,

  For a more specialized on issue of Windows Live Mail help, send your query on the Windows Live Forum.

  Windows Live Forum -http://windowslivehelp.com/