not visible on the switch Catalyst 2960 vNIC...

Similar Questions

• Need help to check the switch VMNIC and VNIC DVS mapping...

  Need help to check the switch VMNIC and VNIC DVS mapping...

  I checked the command net-dvs, but it was not useful.

  Thank you

  Ravinder Singh...

  You do not have access on the interfaces between itself or this info is not visible in vCenter? Probably, you should talk to one who is in charge of your nexus dvSwitch.

  I don't know how it works on the nexus 1000v switch, but the output of the net-dvs provides information on balancing policy for all ports (note that he understands the uplink ports that may still occur as "port id of virtual source"):

  # net-dvs. "grep EI ' (Balancing | port)"

  port 320:

  source port = load balancing virtual id

  port 321:

  source port = load balancing virtual id

  port 177:

  source port = load balancing virtual id

  You should also be able to enter this info from esxcli, but I don't know if there is a hook to esxcli for the link. Perhaps, you can branch off with cisco of dvs esxcli vswitch network or something. On the dVS of vmware, you could do:

  # esxcli dvs lacp vmware vswitch network status

  LACP is disabled on DVSwitch.

  
  

  # esxcli dvs lacp get config vmware vswitch network

  DVS name LAG ID cards active network Mode

  ------------  ------  -------------  -------  ----

  Vmnic1 Some_DVSwitch 0, vmnic3 false

• Operations are not visible in the viewport in the develop module only in the browser window.

  1.I have a very strange problem with Lightroom 6.5 and earlier versions had some of the problems (so little reliable, because I don't know what time it will happen again) Lightroom if I work after a while, the following occurs: in the large screen of the applied rendering operations are not visible, only the small window of browser. In the middle of the screen is NOTHING done, so I continued to work on the image in the window of exploitation and not the image disappears, just a gray window remains above. Dan I switch to another view and then be visible again (but operations also do not appear this, only in small browser window displays the changes applied) I have to restart your PC for vouchers, which sometimes does not occur when you restart. Function the GPU turned power off.

  2. at this moment, there is a new problem starting.

  Lightroom begins only with color boxes in the grid, no image is visible

  
  

  My system configuration: Windows 7, 64-bit Intel Core i7 - 3770 k CPU 3.50 GHz 16.0 GB RAM ATI RADEON 4800 series

  This could be caused by a defective monitor profile.

  As a diagnosis too, l and, possibly, a temporary solution, try to set the monitor to sRGB profile.

  If this solves the problem, you need to calibrate the monitor with a standard material.

  This will create a new profile that accurately describes your monitor.

  Press the Windows key + R, type colorcpl, and then press ENTER.

  Add the sRGB profile, and then set as default profile.

  

• How can I just disable logging in El Capitan? It is not visible in the disk utility by pressing alt and file!

  How can I just disable logging in El Capitan? It is not visible in the disk utility when you press alt and file!

  

  Mac OS X: about the logging of system - Apple Support files

  Hope this helps, good luck to you.

• My Hotspot is not visible in the settings

  I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  Hello

  To configure Personal Hotspot, follow the instructions here:

  • Share your Internet connection with Personal Hotspot - Apple Support

  To help to solve problems with your hotspot, follow the steps detailed here:

  • Get help with Personal Hotspot iOS - Apple Support

• Report not visible in the address bar icon have installed the latest version, works with Safari.

  Icon not visible in the browser bar Firefox 40.0 report. Report of uninstalled, installed report 3.6.1507.14; restart the Mac under OS X 10.10.4 Yosemite. Still no report icon. Report NB icon present in Safari 8.0.7 and extras Menu.

  I'm not entirely sure about the feature you request on the subject, but here's what I could find:

  • http://www.Trusteer.com/rapport-icon-not-showing
  • http://www.Trusteer.com/support/how-can-i-tell-rapport-working and support: http://www.trusteer.com/support/submit-ticket

• Comments on CNET articles are not visible in the x 64 every night

  If you open any page of the CNET article for example URL below, there is a bar with a 'Comments' button and a few other links Twitter/Facebook/etc.

  http://News.CNET.com/8301-11128_3-57342036-54/Volvo-plug-in-diesel-hybrid-races-into-Europe/

  This bar is not visible from the x 64 Nightly build, even with all extensions disabled. It is visible that if I start Firefox in Mode safe.

  I find it strange because apparently it is disable the extensions I've already done manually and turn off any custom parameter and the theme that I don't have.

  Looks like a bug on the side of Firefox, as the same page works fine in IE and Chrome, and, as I remember, in the 32 official output x. Any idea?

  I see the same thing with the current 32-bit Nightly build on Linux.
  
  Looks like a problem with the JIT compiler.

  It works if I set javascript.options.methodjit.content to false.

  A good place to discuss problems with Firefox nightly builds and Firefox beta builds is the forum mozillaZine Firefox builds.
  
  There is also a thread every day to discuss problems with the last Nightly build on the build from mozillaZine forum.
  
  You must register on mozillaZine forum site to post in this forum.

  See http://forums.mozillazine.org/viewforum.php?f=23

• Share photos added to the photo library via the menu are not visible on the Photos

  Hello

  I started using DxO OpticsPro 10 to process Raw files. When I used the share menu in this application to "Add photo" pictures are exported but not visible in the Photos app. I see that they are in the photo library (Show Package Contents > Masters), but they are not visible in the Photos in the Photos app. However if I use "Export to Application" instead of "Add photo" in DxO OpticsPro the Photos app opens and the image is visible.

  You can't always do and changes directly to the photo library - you must use the program of Photos to import photos - adding photos to the library has no positive effect (and may even cause problems)

  LN

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• computer Vista Home network is not visible from the XP computers

  I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
  It works in Windows 7. Each group can see all the others and can access shared files and printers
  with one exception. Vista computer is not visible from the XP computers. It is visible from
  the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
  That I need to change, but I'm not.

  Thank you.

  David

  Hello

  see Help for these links if

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• BlackBerry Smartphones my caller ID is not visible on the phone of receivers

  When I call someone, my number is not visible on the phone receivers. I have enabled Caller ID, but it does not always show.

  I have a Bold 9000.

  Any suggestions how to solve this problem?

  Hiya!

  Does show anything at all? or just "Unknown"?

  You said that you check what ID caller is activated?

  Phone key > Menu key > options > General options > Show My Number is set to 'Yes' and limit my identity is set to 'network '?

• connect with vm via VMRC console is not visible in the self-service portal

  Even after providing the actions required, I do not get this option "connect with vm via VMRC console is not visible in the self-service portal. Anyone who can help me in this?

  https://www.VMware.com/support/Vcac/doc/vrealize-automation-62-release-notes.html

  
  

  6.2 additional:
  

  VMware Remote Console (VMRC) is disabled for vSphere machines *.

  Action connect using VMRC for vSphere machines has been deleted due to a security breach. Access remote console for machines provided by vCloud Director is not affected. For more details on this topic, see VMSA-2014-0013.

  
  

  Thank you

  Kumaran
  

• I finally got CS2 installed on my system. But now the menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this?

  I finally got CS2 installed on my system. But now the drop-menu background color is black and the elements are not visible until the cursor is over them. It is very difficult to read. How can I change this? I tried to go into change preferences but it does not work

  I changed it to the value default them and that worked. Thank you very much