NOTIFICATION Interface file flat a critical error: No. LKM is selected for this set of source...

Similar Questions

• critical error: no LKM is selected for this source

  Hello

  My requirement is to load data from oracle to hyperion essbase,

  -> I created dataserver, physical and logical schema for both technologies

  -> Model created for both technologies & boning, the tables and the dimensions are extracted in both models

  -> Created agent & agent of logic in the topology

  -> The new creation Interface.

  Imported KM as

  RKM Hyperion Essbase,

  LKM SQL file

  LKM hyperion Essbase Data SQL

  LKM hyperion Essbase Metadata for sql

  LKM oracle to oracle (DBLINK)

  LKM Oracle to oracle (datapump)

  LKM sql for oracle

  IKM sql for HyperionEssbase (DATA)

  IKM Sql for Hyperion Essbase (METADATA)

  Drag and dropped the Oracle Source (table) and target Hyperion Essbase (Dimensions) and mapped the respective records from source to the target

  When running... It occurred, issue critical error: No. LKM is selected for this source

  I tried selecting the source of the flow tab and try to change in properties, but in the Lkm selector appeared only flaw...

  An LKM is responsible for loading the source data from a remote server to the staging area. It is used by the interfaces when some of the data source stores are not on the same database as the staging server. In your scenario, the target cannot be designated as the staging area as Essbase is not a relational technology, so you would need only a LKM if your waiting area was not also on your Source (the Oracle database that contains your source table). If this is the case and you have a separate staging of hotel for example SUNOPSIS MEMORY engine you must a LKM as LKM SQL for SQL. If you set the staging area to be on your Source then you will not need to specify an LKM.

  This is why, according to the location of your staging area you need the following KM, LKM SQL for SQL and SQL IKM Hyperion Essbase (DATA) or just the SQL IKM Hyperion Essbase (DATA)

• HP Envy: menu starting critical error – is there a solution for this yet?

  My PC has just started with this "critical error - menu start does not" nonsense.

  Is it a good solution for this yet, because everything that I've tried up to now does not work.  I have not tried to reinstall Windows 10 yet, as I don't want to use this option until this than absolutely necessary.

  Can't believe that the issues I had with this PC and I got it 3 months.  Want my old cheap HP was still usable...

  @And2

  https://www.YouTube.com/watch?v=WnAf_NccrXw

  REO

• Error message "Preview not available for this file.

  I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

  I use LR 4.4 on a Windows 7 PC.

  Thanks for any help that can be provided.

  Robert

  Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

  Camera Raw plugin | Supported devices

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• Why Vista WMP can't play .asf files and why MS has not created a fix for this?

  Why Vista WMP can't play .asf files and why MS has not created a fix for this?

  Hi pdaamckechnie,

  The ASF Format (Advanced Systems) is the preferred Windows Media file format. With Windows Media Player, if the appropriate codecs are installed on your computer, you can play audio content, video content, or both, that is compressed with a wide variety of codecs and that is stored in an .asf file.

  You can check the link below for more information on the types of media files that supports Windows Media Player
  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  See the link below for more information on codecs.
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• Installation of Photoshop CS4 error 6 of the license for this product has stopped working

  Installation of Photoshop CS4 error 6 of the license for this product has stopped working

  Hi Mela,

  Please try the below mentioned links

  MAC OS: http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

  WINNER:http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

  Thank you!

  Atul Saini

• Cannot back up the system - get "critical error (0x8000FFFF) - how do I fix this?

  I have a Gateway laptop with Windows Vista Home Premium - recently I received this error message when you try to make a point to restore/backup: unable to backup system - get "critical error (0x8000FFFF)".

  Any ideas how to fix this?
  Thanks for any help,
  Bob

  Use this tutorial:
  0x8000FFF error code
  http://support.Microsoft.com/kb/946414
  There the "Fix it for me" application and a "I'll fix it myself" instructions.

• The poor Internet behavior Device Manager error "' there is no selected for the item or a set of device driver information."

  Original title: poor Internet behavior.

  I bought a laptop Lenovo X100e used with Windows 7 Professional. It was a great computer, but when I go on the internet, it behaves as if the connection is slow or wobbly, even if the connection is fast. This is especially true of the streaming video, who stutters so much, it is virtually impossible to watch Netflix or YouTube or any other video streaming service. It is also a great computer so I really want to solve this problem, rather than buying another computer.

  I used this laptop on my network domestic WiFi so much and a direct connection with the same behavior. I diagnosed my network speed and its good, usually around 20Mps, again I tried this laptop in public places like Whole Foods, and it has the same: wobbly connection. I have an old Dell Latitude that works and it works great on the same network internet and I used my phone on my wifi at home and it works fine, so it's clearly the Lenovo.

  The network cards are 11 b/g/n Wireless LAN Mini-PCI Express Adapter II and Realtek GBE Family Controller christophepaille. I checked the drivers for the two (using Device Manager), and they are both currently. I used the function "diagnose problems" and found nothing. I googled for problems with them and have not found much.

  There is also a Qualcom Gobi 2000 listed (it's a WAN wireless driver for Windows 7) under other devices and he says "there is no driver selected for the item or a set of device information. I tried updating the driver, but got an error message saying "Cannot find Windows driver." software for your device I have no idea if this is relevant.

  In addition, the laptop plays the video without any problem if it is a file on the local drive, such as mp4, so I don't think that the video problem is in itself. It is the general communication with a network. Again, I don't think it's a problem of wifi because I get the same behavior, even if I plug a cable network directly to my router.

  Also, I tried several browsers updated, including Chrome, Firefox and IE. In addition, I ran several antivirus scans, and nothing is found.

  Any help would be greatly appreciated.

  (1) run chkdsk as follows:

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volume to check the next time that the system/PC reboots,
  Enter: y

  Now, restart the PC.

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php
  Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.

  =====================================================================

  2) run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  =================================================================

  If SFC Scannow could not repair any or all the corrupt system files
  follow these steps:

  (a) open a command prompt (start / all programs / accessories)
  Right click on the command line option, then select: run as administrator

  (b) at the command prompt, enter: DISM.exe/online/Cleanup-Image /ScanHealth

  Press the ENTER"" key.

  (c) then enter: DISM.exe/online/Cleanup-Image /RestoreHealth

  Press the ENTER"" key.

  (d) now rerun the command SFC/SCANNOW...

  At the command prompt, enter: SFC/scannow

  J W Stuart: http://www.pagestart.com

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 1079: "the account specified for this service is different from the account specified for other services in the Sun in the same process.

  Hello Sir

  customers start the dhcp service, I get an account of 1079 ACE ' the error specified for this service is different from the account specified for other services in the Sun in the same process.

  
  

  Go to start / all programs / accessories / Run.  Type netsh winsock reset catalog , and enter.  You may need to restart.  See if that fixes the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message on C4580: line: 2107; Char: 1 error: there is no connection for this connection ID.

  Code: 0

  URL: res://leframe.dll/preview.js

  It appears more and more often, often on sent by e-mail or web docs. If I answer "Do you want to continue running scripts on this page?" with o or N, nothing happens. I tried to do screen grabs & print photos that result, but still get the same error msg.

  The problem is caused when Windows creates the profile of the printer in the control panel that is not properly it create with drivers.

  We will not completely uninstall all HP software, instead we will remove the corrupted Windows printer profile and reinstall.  Total time for this on an average computer is about 5-10 minutes to repair completely (including rebooting).

  1) navigate Menu start > devices and printers or Start Menu > Control Panel > printers

  (2) select every profile of the printer to the printer with a problem, and then select remove device/printer.

  (3) restart

  4) go to the Start Menu > all programs > HP > insert model # here > adding printer (or Assistant)

  (5) follow the installer prompts to reinstall the printer profile and it recreates the Windows printer.

  (6) test printing google.com (uses very little ink when the test page comes out).

  I would like to know if you have any questions or problems.

  Thank you

  Dan

• Cannot read CDs/DVDs, get the error "file does not have a program associated with it for this task" under XP

  Cannot read a cd or dvd to print

  Hi WayneMarkland,

  ·         What happens when you try to play an audio CD?

  ·         How do you print DVDs?

  ·         When exactly do you get the error message?

  I suggest trying the Microsoft Fixit and/or manual steps from the following links and check if it helps:

  Diagnose and repair Windows files and folders problems automatically

  You receive an error message when you try to start a program that has the an.exe file name extension

  How to change or choose the program that starts when you double-click a file in Windows XP

  I hope this helps.