Notifications do not close automatically

Similar Questions

• How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  i mac OSX10-9-5 2015.   How can I order i-Tunes DOES NOT close automatically after 30 minutes... Despite having put in place to save energy to stay active for 2 hours?

  To the best of my knowledge iTunes has all of the features that could stop him. What make you believe it's iTunes rather than some other power saving feature? What happens exactly 30 minutes? It's happens during playback video or audio?

  TT2

• New message notifications does not disappear automatically

  Hello, everyone.

  I've had Skype for about two years now. Since I got it, it was convenient that the new message notification seems to go away when I look at the Skype window.

  Well, this is more the case.

  The new message notice persists, but it isn't permanent, fortunately. It goes away after I have send a new message to the group, or until I manually "mark as read".

  It's not a big deal, but it is rather annoying that it does not have its own more. I already tried to restart Skype and that does not seem to solve the problem.

  Suggestions?

  http://community.Skype.com/T5/Windows-desktop-client/Skype-chat-messages-are-in-the-wrong-place/m-p/...

• my computer does not close automatically power off after disconnection

  When I'm ready to shut down the computer, I have to hover and wait at least 5 minutes (sometimes less) for the auto shut off computer.  Most of the time it didn't, so I have to be able to.  My os is windows XP.

  Hello

  -Did you change after which the problem started?

  I suggest that you follow the steps in this article and check if it helps.

  Your computer stops responding when you try to shut down in Windows XP

• Good day, notification of save my icloud does not close. I pressed the bottun close several times, but he's still on my screen. How this can be fixed.

  Good day, notification of save my icloud does not close. I pressed the bottun close several times, but he's still on my screen. How this can be fixed.

  Restart the device - without loss of data

  1. Restart your iPhone, iPad or iPod touch - Apple Support

• Notification Center will not close on my ipad 2

  My notification/widgets page will not close on my IPAD 2.  When I drag the page, it won't move.  I can see my page weakly in the background with "slide to unlock" and the clock start, but could not get anything to move.  I wanted to try to start again, but I can't stop because I can't drag any suggestions?

  Hi ghartman1,

  Please visit Apple support communities.

  If you can't drag to unlock your iPad or turn it off, you can force it to restart:

  Restart your iPhone, iPad or iPod touch

  How to force reboot

  You must force restart your iPhone, iPad or iPod touch as a last resort, and that if it does not. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  You can also learn what to do if your device isn't yet to respond or turn on.

  All the best.

• I m problem that my computer automatically turns off (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Previously I was using WIndow Vista Home Premium but recently I installed Windows Vista Ultimate.I m having problem my computer turns off automatically (is not closed correctly at the time of the switches) and when I start it gives message that windows do not close properly seeded.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
  PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Lightroom does not launch or closes automatically after the splash screen

  Lightroom does not launch or closes automatically after the splash screen

  I suggest you to please you by going back to the earlier version of Lightroom once and see if it helps.

  How backwards: Instructions to restore an earlier version of update

• Icons in the taskbar Windows 7 (notifications) does not not at the start. [SOLVED]

  Question: It started a few days ago, I'm not sure what has changed (no updates to anything und do not clean my comp so far here). When starting, but not load my system tray icons/notice. There is a select statement 3 charge that are supposed to, but there should be more (like volume, wifi, (I have disabled power), etc.) There is 1 which is not supposed to because it is hidden completely.

  3 loading (assumed):

  ~ Intelligent ram (advanced care system)

  ~OpenOffice.org Quickstarter

  ~ Avast icon

  1 who is responsible (not not supposed to):

  ~ Synaptics Pointing Device (touchpad for laptop, I have the touchpad disabled permanently, so I completely hidden icon (no notifications).

  Icons that are supposed to load:

  Shown (visible in the status bar)

  ~ Intelligent ram (advanced care system)

  ~ Connection/Wifi signal strength

  ~ Volume

  Hidden, but display notifications (accessed via popup "Show hidden icons" arrow)

  ~OpenOffice.org Quickstarter

  ~ Avast icon

  ~ Action Center (flag)

  (I think there's one more, but I don't remember.) It could have been 'Power', which I think, but it is completely hidden, as in the system icon is disabled)

  What is already:

  ~Notifications/what watch is already very well tuned for my taste. I just got set to "Show icon and notifications", stuff the value "notifications only." (Ergo, it resides in my region 'Show hidden icons' through arrow, but is not visible otherwise.) Und stuff put not show at all.)

  ~ Windows is up to date.

  ~ Drivers are all up to date.

  ~ System is cleaned (Spyware, Malware, Antivirus, General Computer Care) a few times a week, has been cleaned out of turn, in order to help solve.

  ~ Regardless of the icon is not displayed, programs, still work properly.

  What has been tried:

  ~ To reboot first, simple. Nothing.

  ~ Searched online, find the regedit, removed IconStreams und PastIconStream in the registry, kill explorer.exe, run explorer.exe. Voila, my icons were back. Except for some I had to modify the settings on back to what I wanted. That was supposed to be the end of it. ... It wasn't. Model began the next day, icons were not loading right. The same 3 icons has charge. Tried the regedit with a reboot... Nothing helps.

  ~ I tried Regedit und journal/off voltage. Zip, they go back to does not properly.

  So, I wonder why the regedit isn't sticking. Personally, I don't find yet, everything which would be somehow in conflict with this, especially since the wifi turns on automatically does not show in the taskbar, or volume. Everything seems to work fine, so I don't understand why some of them are not loading. The only way I know to make the back is with regedit. But in doing so each time I start my computer is pretty boring.

  Search for a solution: What can I do to remedy this? Everything I looked at gives me "update drivers, windows update, virus/malware research, make regedit (mentioned above), log off / on, restart" that have been tried.

  Thanks in advance.

  UPDATE *.

  Alrighty, I tried to start in safe mode, a boot minimum then tried und tool File Checker system, nothing that was of any help either.

  So, as a last ditch effort... I did a startup und repair selected a Restore Point.

  Solution: My icons in system tray restored to a previous state until I started having problems, are evidence of as it should.

  UPDATE *.

  Obviously, I have solved my problem, but I have to mark an answer for them to consider that it solved und I can not put my own answer to select. So I chose the one who has not fixed it, but would probably be someone elses.

  Hello

  Thanks for posting your query in Microsoft Community.

  This could be due to several reasons, including missing or corrupted file system. I really appreciate the efforts made to try to resolve the problem.  We will try these steps and check to see if they help.

  Method 1: Method 1: Start the computer Safe Mode and check if the problem persists. If the problem does not persist in safemode, turn on your computer in a clean boot state and check.

  Step 1: Start the computer in Safe Mode

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you are using.

  Please refer to: start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run the System File Checker tool

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• 12 iTunes does not start automatically when I connect iPhone 6s

  I have a desktop Windows 10 new and I connect my 6s iPhone more synchronization with Outlook, every day.  When I connect my iPhone, iTunes not open automatically as it has always done in later versions.  If I manually open iTunes, then the iPhone syncs fine, but I would like to do this annoying extra step every day.

  I have read several posts on this topic and here is what I tried:

  -J' I uninstalled/reinstalled iTunes

  -J' checked I have the vs 12.4.3.1 of Windows and iTunes updates

  -I went to Device Manager > Apple Mobile Device Driver > pointed to: \Program Apple Mobile Device Support\Drivers updated and referred 'the driver is up-to-date.

  -In iTunes > edit > Preferences > devices > prevent iPhone sync automatically is not checked

  -In iTunes > my iPhone > summary, is checked automatically sync when this iPhone is connected.  I also tried unchecking it, apply, close/reopen iTunes and then check again with the same result.

  -J' have tried using a different USB port

  In addition to this, when I connect my iPhone to a different USB port, Windows gives a saying "Select to choose what happens with this device.  When I click on it, Windows provides about 5 options on how to import the device or to open an application when the device is connected, but iTunes is not in the list of apps to select from.  In addition, in older versions of Windows, there is a link to select a different program from your pc to use if it wasn't in the shortlist and this link/option is no longer there it that it seems impossible to select iTunes opens automatically when the iPhone is connected.

  FYI, I had exactly the same problem on my old pc once it has been upgraded to Windows 10.

  Does anyone know how get iTunes opens automatically when I connect my iPhone?

  I suspect that you need to tell Windows not to do anything, make sure that the iTunes Helper application is configured to run on start-up (activation/deactivation of the next triggering and to solve this problem) and in iTunes, select the device and choose the option to run iTunes when the device is connected.

  TT2

• I bought a book and he won't let me see it. The application closes automatically when I press the book

  I bought a book and he won't let me see it. The application closes automatically when I press the book

  You tried to delete the book and it redownloading via the tab purchased in the application and if that doesn't fix not tried to close the iBooks app via the phone to taskbar (Force an app to close iOS - Apple Support) and/or tried a soft-reset/reboot the phone (press and hold the home and sleep buttons for about 10 to 15 seconds, ignore the slide to power off) after which the Apple logo should appear and it should restart)?

• Photon: Car app does not close

  When I take my phone out of the car dock, the application of the car does not close.

  I couldn't find a car app in the application manager, so I tried to close it manually what could be the application of the car. Still not good. It's really annoying because the home on the phone button will automatically car app when the application is active.

  Suggestions?

  
  

• does not close the door of my tape on my handycam from sony 800

  My automatic cassette door does not close... device is turned on and plugged into the wall... can it be fixed...

  Hello
  Welcome to the community of Sony.

  See the following link for possible troubleshooting steps solve the problem.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/38866/c/65%2C66/kW/38866

  Thank you for your message.

• Window opens and closes automatically

  I also have the same problem.
  I bought a laptop more than two weeks ago, I turned on and it started downloading the updates for Vista. (I have Vista Home Premium)
  Then when I turned off my laptop, you could see that Vista was installing updates before power off.

  When I restarted the laptop, I have the same problem that jmwmh has.
  Several programs of the control panel will not open, as the update of Windows, user accounts, Parental controls, etc. They open and close automatically.
  I even used the recovery DVD and reinstalled Vista several times, but after some time, the problem returns.

  I even tried to disable Windows Update, because I discovered that it was after an update of Vista that my laptop has gone mad, but STILL it downloads an update and installs it without my permission.

  I have administrator rights, so this isn't the problem...

  Any ideas?

  Donangelus,

  Thank you for using answers.microsoft.com

  My suggestion is to try to create a new user profile and see if the problem occurs in the new profile.

  Here are the steps to create the account.

  • Create a new user profile:
    Follow these steps to create a new account, we can test:
    1. Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
    2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. Click on create a new account.
    4. Type the name you want to assign to the user account, choose the type of administrator account on the computer, and then click on create an account.
    5. Log out and log in to the new account.
    6. Verify that the problem you are experiencing is resolved

  Let us know if that fixes the problem or if assistance is needed.

  Kind regards

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• In Outlook Express, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address.

  Original title:

  Under XP, when I type in the first letter of an e-mail address that is in my contacts, the dropdown does not close when I click the right address. What a nuisance! Also, when I go to create a new e-mail message, an address of my contacts appears in no particular place, making it impossible to complete the message.

  Hello

  I suggest you turn off Auto complete and then check if you face the same problem.

  a. open Outlook Express.

  b. click on Tools.

  c. click on Options.

  d. click the send tab.

  e. uncheck the e-mail address automatically complete when composing box.

  f. click OK.

  Turn Auto complete and test again to see if the behavior is better. To activate it again, follow the same steps as above, but put a check mark in the box.