Novice question-Can insert or delete pages?

Similar Questions

• How can I insert and delete pages from a pdf with acrobat 10 X?

  How can I insert and delete pages from a pdf with acrobat 10 X?

  Otherwise, don't forget that your page thumbnails Panel is open and click the icon highlighted in this image, just under the title.

  

  You will see a drop-down list with the options you need.

  

• Problem with CS5 to crash during the insertion or deletion of page

  I have a legacy file (teaching manual) which was created in CS2 and has been edited and updated over the past two years with no problems. The file is about 360 pages, with about 30 illustrations, table of contents and index larger size. During the updating of the material today, I went back to insert a page because the text to overflow and InDesign crashed. This happens whenever I try to insert or delete a single page. I can insert a single page on the pages i to viii, but when I try to insert a page in InDesign Sec2:1 early crashes. I can open and close the file, and edit anywhere without any problem.

  If I insert 2 pages at a time, it works fine and I can run the text on the page. But when I delete the extra page that I don't need, it crashes. It doesn't seem to be specific to any specific master page in the file. I tried several times to export to an IDML file, reopen and save it in an InDesign file, but the same problem occurs.

  The same thing with the file on the same verson InDesign which is on my laptop. This problem does not occur with other InDesign files that I've created in the past. I need help. Thank you!

  I just thought some about this, so I'm glad you popped up again.

  Seems to me you have two choices, go back to the previous version which works and re-do much editing or try to fix later. If you want to go back, open the file and check the bey in the history of file holding the CTRL key while you choose about InDesign from the menu help. You will see the full backup history in the lower left corner of the dialog box. I check for the latest version, that it has been saved, then open the file in this version and export into .inx (in CS4 or earlier) or .idml .idml for CS5 or later, and then open the .idml in CS5 and save as a new .indd and proceed.

  The existing file, you can divide and conquer stuff, but like I said, I thought instead, and in your shoes I would probably ignore the first step and try to export to text marked for each story, and then build a new doc by placing the tagged text. If it seems to be OK, place the images again and go ahead.

  Whatever it is, I think you have some heavy lifting.

• How can I insert a Wordpress page in my site of Muse?  I need a client to be able to change links on specific pages.  Inbrowser does not allow client to the ad links.

  I need to be able to give my client access to a few pages with links.  These links change often and they want to make the changes.  What is the best solution if you can insert a Wordpress page in Muse?

  Hi Vickichic,

  It is not possible to insert a wordpress page in Muse. You can refer to this post for a similar description: Re: How can I integrate Wordpress into my Muse site?

  Kind regards

  Aish

• Why ID don't delete pages

  Hi all

  I created a document of 60 heavy pages of graphics.  When I'd be just about done, he will let me delete the pages.

  The research I've done so far, I think I've narrowed the problem of this "single point" error, that others have had.  This is when a single point appears somewhere in the document and you can not do several operations until you find the vacuum and remove.

  Some people have written scripts for these (I tried, nothing is).  and others have posted just code that I have no idea how to put it in a script ID.

  Please can someone help, this is a very important document and must end as soon as possible!

  Thanks guys,.

  Tom

  CC version ID

  I don't think that this has nothing to do with it. You try to delete pages, right? All you are descrbing should have nothig to do with the question whether you can add or delete pages.

  Again, have you tried .idml? See remove minor corruption by exporting

• I bought a package from Adobe, but it does not change (add, delete pages or insert headers)... need to add these applications to my Adobe package?

  I bought the Adobe package in June 2016, but it does not change (add, delete pages or add headers/footers)...how can I increase my package from Adobe to include these applications?)

  is it a question of acrobat?

  If so, exactly what have you bought?  (IE, check your account - Adobe ID )

• How can I delete pages from a pdf file

  How can I delete pages from a pdf file

  Hi question renna,.

  To remove the pages of a PDF file, you must use Acrobat (choose Remove in the Pages pane on the tools Panel). If you do not have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.

  Best,

  Sara

• Can I use shrink for an asset (perform insert very-delete operations) table

  Hello guys,.
  
  I have a very simple question. According to an article (link: http://www.dba-oracle.com/t_automatic_segment_space_management.htm) the following quote is written
  

  Beware:  Using ASSM can hinder database DML performance, and most Oracle experts will use manual freelists and freelist groups.  Click here for details on automatic segment space management internals.
  
  Using automatic segment space management is great for almost all Oracle applications, with the exception being super-high update tablespaces, which would use traditional freelists with multiple freelist groups.

  I just want to use shrink my table in order to reclaim the unused space. However, I play a lot insert and delete operations on the table (not update, insert and delete). So, I wonder, if I use shrink, my table will affect seriously? Because I insert and remove thousands of rows in this table every day.
  
  
  And my second question is how can I know that my table is in SAMS (automatic segment space management) to use retractable? Because I was told that my table shoul be in SAMS to use retractable?
  

  select * from v$version;

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  "CORE 11.2.0.1.0 Production."
  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  best regards
  Charlie

  970992 wrote:
  I just want to use shrink my table in order to reclaim the unused space.

  Ok. You are sure that there is some unused space and that Oracle will not reuse space automatically? If you are constantly inserting and removing a table, unless you remove constantly more data that you insert or you use direct-path inserts to prevent Oracle to reuse the space freed by deletions, there is no reason to believe that there is unused space in the table.

  However, I play a lot insert and delete operations on the table (not update, insert and delete). So, I wonder, if I use shrink, my table will affect seriously? Because I insert and remove thousands of rows in this table every day.

  Thousands of lines is enough little activity.

  If you want to shrink the table, you generally want to do while there is little or no activity on the table since you will need to at least briefly to acquire a lock on the table. If you do only a few thousand a day race DML operations, it shouldn't be difficult to find a window where the shrink will not be a significant impact on DML.

  But, back to my first point, I would tend to wait that you don't need to shrink the table in the first place.

  And my second question is how can I know that my table is in SAMS (automatic segment space management) to use retractable? Because I was told that my table shoul be in SAMS to use retractable?

  Assuming that you know what the table tablespace is in

  SELECT segment_space_management
    FROM dba_tablespaces
   WHERE tablespace_name = <>
  

  Justin

• can I insert a landscape page into a document of portrait?

  The majority of my document pages is portrait orientation, however I have a few pages that should be landscape orientation.  Insert/create a page of landscape in a portrait using pages document?  If so, how?

  Thank you!

  Yes, you can place an object of the landscape in a portrait document and subquently command + click on the selection to make it turn so that the long edge is in portrait mode.

  If you create this content in another application or in another landscape oriented Pages document, the content can be exported to PDF and subsequently opened in preview. Here, you would a thumbnail view, and then select the single page export to PDF. You drag and drop in your page guidance document PDF portrait recipient then do rotate/scale appropriate. You can see that using view: see the layout and tab reorder will be useful (skin: None, sizing: original size).

• Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  Can't get the page to print from Microsoft Visio. Also will not delete the queue.

  The problem arose when the USB printer to a laptop with Windows 7 on a desktop using Windows XP. The printer is a HP Deskjet D1660.

  Hunting around, I found a solution that had been proposed for someone else's problem. The detachment is shown below.

  Re: Update critical to correct a PC to printer communication problem, washer dot?

  Options

  • Mark as new
  • Bookmark
  • Subscribe
  • Subscribe to the RSS feed
  • Highlight
  • Print
  • Report inappropriate content

• Question by QNXStageWebView: "browser can not handle web page.

  Has anyone seen this behavior before / can anyone suggest a remedy.

  An HTML page I show in a QNXStageWebView component (with all the properties to values by default, for example, allow JavaScript, allow plugins, etc.) has a link to this URL:

  http://appworld.BlackBerry.com/WebStore/content/41285/

  Click on the link leads to failure. IIRC, I saw both of these messages in the exception dialog boxes:

  "The browser can not handle web page.

  and

  (something like) "Unknown protocol".

  This behavior occurs in both debug and release build (OS 2.0.1.358) and works very well in a regular web browser.

  Hello

  I just revisited this question yesterda. take a look at QNXStageWebView HTML API documentation, I noticed the unknownProtocol event and implementation of the following (check my particular URL of interest not shown):

      private function onUnknownProtocol(event:UnknownProtocolEvent):void
      {
          _webView.stop();
          event.preventDefault();
          flash.net.navigateToURL(new URLRequest(event.url));
      }
  

  That does the trick.

• How can I delete pages in a PDF document?

  How can I delete pages in a PDF document?

  Hi Nancy,.

  You must use Acrobat to be able to delete a page in the pdf file.

  Please see the following link for instructions on how to remove pages from pdf in detail: using Acrobat | Rotate, move, delete and renumber PDF pages

  Kind regards

  Rahul

• How can I delete pages in my PDF?

  How can I delete pages in my PDF?

  In Reader, you can't. In Acrobat Ctrl-Shift-D (Windows) or command-shift-D (Mac). If you say what version of Acrobat and your operating system, we can give you a way to gui to do it, but it has changed between versions 9 and 10.

• How can I use tools in Acrobat Pro ms? I have Acrobat Pro DC. When I try to use a tool, let optimize PDF, delete pages; Add pages, etc. I click the icon, but rather to open the toolbar, it takes me to a web page and ask me to buy Acrobat Pro DC. Then

  I have Acrobat Pro DC.

  When I try to use a tool, let optimize PDF, delete pages; Add pages, etc. I click the icon, but rather to open the toolbar, it takes me to a web page and ask me to buy Acrobat Pro DC.

  So, what should I do?

  It's what he would do if you were using the reader instead of Acrobat.

• I am trying to print PDFS from Safari, but can not see the page numbers

  I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

  The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

  The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.