NSX 6.1.2 and vCenter product 6.0

Similar Questions

• Unable to get the values of the attributes of the Annotation VM Notes and Custom (product)

  Hi Experts,

  Need help to enter the values of the following custom attribute annotation is my script. No problem collecting other information.

  below is the codes where im having issues. There is no output for the VM Notes and the product.

  @{N = "VM Notes";} E={$_. Summary.Config.Annotation}},

  @{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty

  $_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.

  Below is the script when the above code is integrated.

  $vCenterServerName = "test.com"

  SE connect-VIServer $vCenterServerName - xxx-xxxx password user

  $SMTPServer = "xxxx".

  $ToAddress = "xxxxx".

  $FromAddress = $vCenterServerName + "@xxx.com.

  $Subject = ' report VMPath for all VMs in vcenter - tpe.corp.kazootek.com.

  $date = get-Date-format-M - d - yyyy

  $reportlocation = "C:\test\vcenter-xxx-vmpath-$date.csv".

  $vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',' Runtime.Powerstate ',' Summary.Config.Annotation '.

  # $report = C:\test\tpe_mate1.csv - UseCulture | %{

  $report = get-View - ViewType VirtualMachine-property $vmFields | %{

  $esx = get-view-id $_. Runtime.Host - name of the property, material

  $_ | Select Name,

  @{N = "VM Notes";} E={$_. Summary.Config.Annotation}},

  @{N = ' product'; E = {$key = $_.} AvailableField | where {$_.} Name - eq 'Product'} | Select the key - ExpandProperty

  $_. CustomValue | where {$_.} Key - eq $key} | {{Select - ExpandProperty value}}.

  @{N = 'Template'; E={$_. Config.Template}},

  @{N = 'Center'; E = {}

  $obj = get-view-Id $_. ResourcePool-name of the Parent property

  While ($obj - isnot [VMware.Vim.Datacenter]) {}

  $obj is get-view $obj. Parent - the Parent property name

  }

  $obj. Name

  }},

  @{N = "Cluster"; E = {}

  $obj = get-view-Id $_. ResourcePool-name of the Parent property

  While ($obj - isnot [VMware.Vim.ClusterComputeResource]) {}

  $obj is get-view $obj. Parent - the Parent property name

  }

  $obj. Name

  }},

  @{N = 'Host'; E = {$esx. Name}},

  @{N = "NumCpu"; E={$_. Config.Hardware.NumCpu}},

  @{N = "MemoryGB"; E = {[int]($_.)} Config.Hardware.MemoryMB/1KB)}}.

  @{N = "ProvisionedSpaceGB"; E = {($_.Summary.Storage.Committed+$_.Summary.Storage.Uncommitted)/1 GB)}},

  @{N = "Powerstate"; E={$_. Runtime.PowerState}},

  @{N = "Path"; E = {}

  $current = get-view-Id $_. Parent - the Parent property name

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent - the Parent property name

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  @{N = "FolderId"; E={$_. Parent.ToString ()}}.

  @{N = "Manufacturer"; E = {$esx. Hardware.SystemInfo.Vendor}},

  @{N = ' model'; E = {$esx. Hardware.SystemInfo.Model}},

  @{N = "ProcessorType"; E = {$esx. Hardware.CpuPkg [0]. Description}}

  }

  # }

  $report | Export-Csv $reportlocation - NoTypeInformation - UseCulture

  Write-Host "Report exported to csv file" + $reportlocation

  Send-Mailmessage-to $FromAddress - to $ToAddress - subject $Subject - $reportlocation - SmtpServer $SMTPServer attachments

  Write-Host "report was sent by E-mail to '$ToAddress' to ' $FromAddress

  You must add the $vmFields variable AvailableField and CustomValue

  $vmFields = ' Name ',' Parent ',' Config.Template ',' Runtime.Host ',' ResourcePool ',' Config.Hardware ',' Summary.Storage ',.

  'Runtime.Powerstate ',' Summary.Config.Annotation ',' AvailableField', ' CustomValue.

• Desktop vSphere and vCenter Desktop

  The Horizon Suite includes Desktop vCenter and vSphere Desktop?

  I see in the description of the product Horizon Suite includes 'View of the Horizon', but we know not if it's the 'Horizon view Bundle', which includes vSphere and vCenter, or the "Horizon view add-on", is not.

  Anyone can clarify that for me?

  Thank you

  Yes more horizon will include office and Desktop vSphere vCenter.

  This will give you a better clarification

  VMware KB: VMware Horizon Suite 1.0 licensing system

• vCenter Server and vCenter server Essentials

  I want to install VMware Essentials Plus. VCenter Server and vCenter for two server products separate Essentials or are they the same products with different licenses?

  Concerning

  Marius

  VCenter server is a product with a different license

  1. the essential Kit

  2 Foundation

  3. standard

  Allocation of points for the useful and correct answer by clicking on the sub tab

• Use LM in vCenter production?

  I would use LM for test/dev. For those running LM, you run this in your vCenter production or do you have it running in his own vCenter to keep 100% isolated?  Are there problems with the regular models vCenter separated models LM?

  > To these LM running, you run this in your vCenter production

  You don't need to run a dedicated Lab Manager vCenter.  I've seen many customers running a double fine vCenter (LM Lab and regular production.

  The simplest logical divider is to have a Pool of specific resources for the Lab Manager virtual machines or a Cluster.

  > Are there problems keeping the regular models vCenter separated models LM?

  The Director of the laboratory models do not appear in vCenter and vice versa.

  When you import a template into the LM, it will do two things:

  1 make a full clone of the model and remove this clone of the inventory

  2. "take back" the existing model, moving it in the folder Manager of laboratory on the data store and delete the model vCenter inventory.

  * Note, never handle one of the models that are stored in the store LM records data like that cause errors with linked clones.

  You lose space due to duplication of models (one for a vCenter for LM), but the savings that LM provides through linked clones should do well worth it.

  Best regards

  Jon Hemming

• Nexus1000v and vCenter Linked Mode

  Hello

  Is that what someone has implemented Nexus1000v in an environment with vCenter Linked Mode active? The VMware support guy says he only is not supported, but in my research in cisco and vmware Web sites I have found no documentation confirming this information.

  Thanks in advance,

  Rubens

  People now officially support us vCenter Linked Mode and vCenter Server Heartbeat.

  Go to the link for the official announcement below.

  https://www.myciscocommunity.com/Community/products/nexus1000v/blog/2010/06/03/nexus-1000V-support-for-vSphere-features-heartbeat-linked-mode

  Thank you

  Louis

• Using VMotion with 2 ESX and VCenter

  Hi all

  I just installed with ESX 2 VSphere and & VCenter. I can't use VMotion to migrate a virtual machine running one ESX towards each other.

  My setup is as follows:

  the iSCSI Software initiator.

  data store even shared by 2 facilitators.

  same conf network on the 2 hosts, none vlan used (set to 0):

  • vSwitch0 for the Service console, connected to the network of the company (vmnik0)

  • vSwitch1 for virtual machine network (connected to the company network vmnic1) and VMkernel (for vmotion, connected to the production network: san, vmnic2).

  Error displayed (at 10%): a general error occurred: the VMotion failed because the ESX host failed to connect to the VMotion network, please check your physical network configuration and settings network VMotion.

  vmnic2 on ESX1 is configured with 255.255.0.0 192.168.130.X mask and connected to eth0 on iSCSI SAN

  vmnic2 on ESX2 is configured with 255.255.0.0 192.168.131.X mask and connected to eth1 on iSCSI SAN

  Thanks for help

  alelievre wrote:

  vmnic2 on ESX1 is configured with 255.255.0.0 192.168.130.X mask and connected to eth0 on iSCSI SAN

  vmnic2 on ESX2 is configured with 255.255.0.0 192.168.131.X mask and connected to eth1 on iSCSI SAN

  Two VLAN different connection to the iSCSI SAN. You should have the same subnet, but a different IP addresses (if any) connecting to the San from each host (depends on the SAN)... For example 192.168.130.25 for ESX1 and 192.168.130.30 for ESX2. Unless your SAN network covers actually two subnets on your local network, you create a question where you don't need to. I would also use separate NETWORK card for vMotion traffic and another for iSCSI. Separate them VM traffic too (makes everything cleaner and less chance of collisions and too load performance causing one issues for each other. This is why it is a good idea to have at least four, if not six, physical NIC (or ports) within an ESX/ESXi server.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• vCenter and vCenter server

  What is the last VirtualCenter and is there a difference between vcenter server and vcenter. I see also different versions I s vcenter 4 and vcenter 2.5 update 6? What are the licensing options

  All products listed under the link below are VI3 (Virtual Infrastructure 3) and include vCenter2.5 and ESX (i) 3.x

  http://www.VMware.com/support/product-support/VI3/

  .. and below is vSphere4, which includes vCenter4.x and ESX (i) 4

  http://www.VMware.com/support/product-support/vSphere/

• languages in vSphere and vCenter

  Hello people,

  I installed the vCenter and vSphere Client so I had to find out there is no prompt for languages. I am of the Germany, and when I finished to install vShpere on German Windows 2003 Server OS everything was in German (terrible). How these products recognize install in German? Local version of the OS, locale (those which exactly)?

  However, now I've read in the description for und vSphere ESX 4.0 there is a command line option to change this:

  vpxClient -locale en_US

  First of all, how to run this command, because I have no experience with CLI?

  Secondly, it sets the language settings for each client that will connect in the future and vCenter itself?

  Thirdly, this fix, the language setting in the Client vSphere for each text, because I also saw phenomena, that most of the text is in English, but the description of the task and vSphere lLogonscreen is in German.

  Hello.

  First of all, how to run this command, because I have no experience with CLI?

  In Windows, you can start-> run the following command:

  vpxClient.exe - local-en - U .S.

  VpxClient.exe running in Start menu-> Run would be the equivalent of the double click on the shortcut on the desktop or the Start Menu.  You can also create a shortcut with these included switches, or changing the text already there.

  Secondly, it sets the language settings for each client that will connect in the future and vCenter itself?

  Each customer must launch the application with the above switches.

  Thirdly, this fix, the language setting in the Client vSphere for each text, because I also saw phenomena, that most of the text is in English, but the description of the task and vSphere lLogonscreen is in German.

  It probably won't fix everything.  Plugins and other items may present as expected.

  Good luck!

• After update Win OS is not genuine and my product key is not valid

  Hello

  I have a Toshiba EA60 - 156 computer equium laptop using the preinstalled software. Suddenly after running auto-updates to update, windows think now its not authentic and my product key is not valid. After trying to check online, I was told to contact Toshiba after checking the key online. Online my copy is authentic, but windows still considers that it is not.

  What should I do?

  Iain

  I raise reading Microsoft license Validation could be responsible for such messages.
  This tool distributed by Microsoft through its Windows Update platform for some time considered the factory image Toshiba installed an illegal copy of Windows XP.

  I think that to avoid popping up this message, you must remove this License validation tool.
  I think that the idea is also to contact the service partner in your country. Maybe they have detailed information on this issue

• I am owner of Age of Mythology Gold Edition and the product key is damaged I only read the first 7 keys from 25. What should I do now to download AoM Gold Edition?

  18 keys are missing from my product key, so I can't download AoM Gold Edition on my new PC. What do I do now?

  Hello

  Please follow the links below to solve the problem.
  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246
  Support for common issues of PC games
  http://support.Microsoft.com/GP/games-for-Windows
  I hope this helps.

• How can I get install CD and a product key for Windows/NT?

  I have a project that requires an old scanner, for which there is only Windows/NT drivers.  I would like to know how and where to get install CD for Windows and Windows NT, and a product key so that I can perform a new installation on a PC which currently has another operating system on it.

  Hi Phoenix,

  Microsoft Windows NT cycle ended on 30/06/2004, for more information on the Microsoft Windows NT support lifecycle you can check out the link and check if it helps.

  Microsoft product lifecycle search

  If you want to know about Microsoft product life cycle, visit the link below.

  Information lifecycle for Windows Client products

• I'm looking for a program that you alow to draw me and trace products and prototypes

  I'm looking for a program that you alow to draw me and trace products and prototypes

  Hello

  Looks like you need a CAD program. Have you checked with someone else, like engineers, who
  that job category? There may be some that are specifically designed to assist with your needs. Of
  course AutoCad, a commercial product, is used by many professionals.

  There are also many available freeware programs.

  BING or Google - freeware CAD programs

  FreeCAD - many freeware programs
  http://www.FreeCAD.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have the original CD and the product key.

  I have the original CD and the product key. How many computers can I install Windows XP Home Edition?

  I have the original CD and the product key. How many computers can I install Windows XP Home Edition?

  You can install it as many times as you want, but the product key is activated on a computer at one time only.

  If you have 2 computers, 2 keys are needed.

• This laptop is old and the product key is not valid.please help

  my laptop current got stolen so a friend gave me their old is a compaq nc 6220.i erased the hard drive to get rid of any data on there.i has used a disk to reinstall windows, but it says I have a 30 trial.and my product key is invalid.how can I get a new or sorting Roble?

  The installed operating system seems to be XP Home edition - which explains why your XP Pro key edition will not work.

  You need to reinstall with the appropriate Pro OEM media, using the key for Pro.