Number of jobs waiting above threshold

Similar Questions

• Acquisition of data above threshold

  Hello

  I started with LabVIEW, a few days ago and found it quite difficult. Hope you can help me a bit.

  My task is: 2 channels (from acoustic sensors), I need to find the time of delay of arrival between them and then to calculate the coordinates of a source that emits sound waves. Then, I looked at several examples that I could find and finally I am stuck at the very beginning.

  I need to work with signals (impulses) are greater than a certain threshold, but how can I do this? I do use the Detector.vi threshold or not?

  Then I need to find the delay of arrival time. Use CrossCorrelation.vi?

  Thank you very much.

  

  OK, the data type of waveform coming from reading your original image is just the default output. You can also acquire the three channels in a single acquisition job by specifying several physical channels and change the output in a 2D DBL table format. In this form, the columns are different channels in your task of CQI. You can then treat each channel I described.

  Mike...

• DBMS_SCHEDULER jobs wait/program end

  Hi all

  I ran into a small limitation on my understanding of DBMS_SCHEDULER.

  I have an executable script that performs a network scan. My goal is to launch this application, wait for them (maybe 5 minutes or 2 hours) for the analysis ends before I return the results.

  Where I am a little confused, is the circulation of works all process when I want to wait for the program complete:

  1 - define a program?

  2 - Apply the arguments?

  3. apply identification information

  4 - set a string?

  Literally, I don't know how to tackle this task. I just want to launch job and wait until it finishes before going to retrieve the file from the server. This is what I have for now, just bits and pieces.

  Mayen simply, I missed something in the docs and I overcomplicate things.

  Thanks in advance to the community for you help.

  Jan S.

  BEGIN
  
    
    
    dbms_scheduler.create_program(
      program_name   => 'network_scan',
      program_type   => 'executable',
      number_of_arguments => 5,
      program_action => 'scan_network.py',
      enabled        =>  FALSE);
    
    dbms_scheduler.define_program_argument('network_scan',1,'x01=1');
    dbms_scheduler.define_program_argument('network_scan',2,'x02=192.168.1.1');
    dbms_scheduler.define_program_argument('network_scan',3,'x03=24');
    dbms_scheduler.define_program_argument('network_scan',4,'x04=D');
    dbms_scheduler.define_program_argument('network_scan',5,'x05=1521-1523,7777');  
  
    vJobName := dbms_scheduler.generate_job_name('NET_SCAN_');
    
    dbms_scheduler.create_job(job_name => vJobName,
                                job_type => 'EXECUTABLE',
                                job_action => '/usr/bin/scan_nework.sh',
                                number_of_arguments => 5,
                                enabled => FALSE,
                                auto_drop => FALSE,
                                comments => 'Network');
  
  dbms_scheduler.set_attribute(vJobName,'credential_name', 'SUCREDENTIALS');
    dbms_scheduler.run_job(vJobName,FALSE);
    
    dbms_scheduler.create_chain (
     chain_name            =>  'net_scan_chain',
     rule_set_name         =>  NULL,
     evaluation_interval   =>  NULL,
     comments              =>  NULL);
    
    dbms_scheduler.define_chain_step('net_scan_chain', 'step1', 'network_scan');
    
    SELECT additional_info, external_log_id
    INTO   l_additional_info, l_external_log_id
    FROM   (SELECT log_id, 
                   additional_info,
                   REGEXP_SUBSTR(additional_info,'job[_0-9]*') AS external_log_id
            FROM   dba_scheduler_job_run_details
            WHERE  job_name = vJobName
            ORDER BY log_id DESC)
    WHERE  ROWNUM = 1;
  
    DBMS_OUTPUT.put_line('ADDITIONAL_INFO: ' || l_additional_info);
    DBMS_OUTPUT.put_line('EXTERNAL_LOG_ID: ' || l_external_log_id);  
    
    
  
      
    -- Wait at least 3 second because its distributed
    dbms_lock.sleep(3);
    SELECT job_name, status, error#, additional_info
    FROM dba_scheduler_job_run_details
    WHERE job_name= vJobName;
     
    
    dbms_lob.createtemporary(l_clob, FALSE);
  
    dbms_scheduler.get_file(
      source_file     => l_external_log_id ||'_stdout',
      credential_name => 'ORACLECREDENTIALS',
      file_contents   => l_clob,
      source_host     => NULL);
  
    DBMS_OUTPUT.put_line('stdout:');
    DBMS_OUTPUT.put_line(l_clob);
  k Scan');
  

  See Tom's last answer in this thread AskTom. It shows how to use the package DBMS_ALERT to notify you.

  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:5320945700346034393

• DBMS job wait till the end

  Hi all
  I have a DBMS job created by calling the dbms_job.submit method. That goes to every time of 15 minutes.
  The problem is when it goes sometimes it takes more than 15 minutes to end the second instance of the same process to start running again. Who cause us the hell of a lot of problems.
  
  Is that anyway to know, this process is ongoing and if this process runs stop limit second process to run or wait a while before trying again.
  
  I really appreciate any help on this topic.
  
  See you soon,.
  / G

  How do you present this work? Only one instance of a particular task running at the same time probably need.

  Take this job, for example, which is intended to be run every second, but sleeps for 5 as part of the work.
  You will never find more than one instance of this running task. When he finished, if it is due to run it, it starts again. It is not to reproduce elsewhere.

  declare
   v_job_id integer;
  begin
   dbms_job.submit
   (job => v_job_id,
    what => 'begin dbms_lock.sleep(5); end;',
    next_date => sysdate,
    interval  => 'sysdate+1/86400');
    dbms_output.put_line(v_job_id);
   commit;
  end;
  

  Then check using

  select * from dba_jobs where job = ;
  
  select * from dba_jobs_running;
  

  But in general, if you need to synchronize access to a resource, you can create a user-defined lock and if you can't get it then you can sleep for a bit before trying again.

• Receive optical power warning - above threshold

  As we know,

  We cannot set up the optical transmit power of the SFP. However, we can check the power level of reception received by the peer through the command:

  View details transceiver interface

  However, newspapers have been showing:

  20 August 06:45:14.434: % SFF8472-5-THRESHOLD_VIOLATION: item in gi1/0/25: high power warning Rx; Running value:-1.7 dBm, threshold value:-3,0 dBm.

  Check:

  Optical alarm warn high low warn low alarm
  Receive the power threshold threshold threshold threshold
  Port (dBm) (dBm) (dBm) (dBm) (dBm)
  -------    -----------------  ----------  ---------  ---------  ---------
  Gi1/0/25-1 article, 7 + 1.0 - 3, 0 - 19.0 - 23.0

  This will have a big impact on my switch? In particular the SFP

  Factors such as damage, etc.

  In addition, how will this affect the performance network, health and functioning of my devices

  Your ideas are much appreciated (and if you can back it up with docs, it would be useful also! ^_^)

  It seems that your remote line is the sending of a relatively high output power and/or you have a connection very short fiber with very little loss. Since you are only at the beach 'warning', you are not likely to damage any of the SFP receiver or adversely affect the operation of the network.  You don't have the possibility to add an Optical Attenuator on the link to make the action more within the specification range.

• I misordered that Photoshop elements for Windows but have a Mac. I have a restitution order number with refund waiting for return. How can I return a download?

  How can I return a download? I waited to get instructions for over a week now. I ordered in error for Windows, but I'm on a Mac.

  You don't have to return it, just go here

  Product order | Platform, language Exchange

• fact the # LNS increase when increasing the number of DB waiting?

  IM using 11g, LNS (Primary) communicates with RFS (Standby) to do it again, when the number of standby database increase, is the number of LNS also increase or it dynamically generates slaves or still to be alone?

  A process of LNS for each destination ensures ASYNC or SYNC. Standby #, 3 LNS. The ARK several processes on the primary contact all Standby to execute the resolution GAP.

  Processes have been renamed to 11.2 to make it a little clearer. An NSS process for each SYNCHRONOUS Eve destination and a NSA method for each ASYNCHRONOUS standby destination.

  Larry

• DataPump - how to change parallel number in job market

  run import data by using the settings file pump, order follows
  
  Impdp parfile dp_import.par logfile = dp_load.log = job_name = parallel dbload = 4
  
  
  question: I need to change parallel to 4-2, but lost session (terminal window), open another session and I can see the job runs, output follows. How can I change parallel?
  
  SQL > select owner_name job_name, job_mode, State, level of dba_datapump_jobs.
  
  OWNER_N JOB_NAM JOB_MODE STATE DEGREE
  ------- ------- ---------- ----------- ----------
  DBLOAD SYSTEM COMPLETE OF 4 PERFORMANCE

  In your new session.

  Impdp attach = job_name who will ask you the user name and password.
  Then, you will be connected to the datapump import session.

  something like this:
  job_name > type 2 Parallels and enter.

• Issue Job number

  Hello
  
  We have the couple of runing jobs on different schedules (hourly, daily).
  There are some of them having several very big job (it increases each time) and there are some with fixed job number (the same was obtained in the first round).
  What is the reason for this?
  
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit
  
  
  script (for all):
  BEGIN
  SYS. DBMS_JOB. REMOVE (1234);
  COMMIT;
  END;
  /
  
  DECLARE
  X NUMBER;
  BEGIN
  SYS. DBMS_JOB. Send
  (work = > X)
  , this = > ' dbms_refresh.refresh (""APPS".) "XXUN_XXXX" "");"
  , next_date = > to_date (March 29, 2012 20:00 ',' dd/mm/yyyy hh24:mi:ss')
  , interval = > "(trunc (sysdate) + 1 + 20/24)" "
  , no_parse = > FALSE
  );
  SYS. DBMS_OUTPUT. Put_line (' job number is: ' | to_char (x));
  COMMIT;
  END;
  /
  
  Thank you
  
  Kind regards.

  Oracle assigns a number of post in the order when the jobs are created. Number of jobs are not incremented (increased) by the database. The jobs where the number does not change simply runs then reschedules themselves for the next race based on the parameter "interval". Jobs where the number grows after each run are probably running a procedure that - at the end of the race - removes the work and then recreates itself for the next run.

• Order relation commercial discreet job

  Hi all

  Can someone help me on the game specific inverter required to create a discreet job of a customer order line.

  Do you need to have a working model for the specific Configuration before the command triggers a job.

  How repetitive calendar from Configurations be connected also with Sales Orders.

  Thank you

  Assani

  Hi Akash,

  To create a discreet job in a sales order, you must first have a model/point defined in the item master Assembly.

  Make sure that the indicator Make or Buy is set to do.

  Build in WIP is checked.

  Bill is set for the model.

  Create a sales order and put the name of the item online SO.

  Complete other details such as the amount and schedule of the line.

  If it is a model of ATO, click configurator to configure the options selection model.

  After configuring, you will return to the command screen.

  Right-click on the item template and click on the order of progress. Select the activities eligible for the Configuration to create.

  Star point configuration will be created on the second line.

  Keep the cursor to the star and do a right-click and select order of progress and select Create Supply eligible order.

  Note the application number.

  Check the output of this application and you will get the work order number.

  Go to WIP > discrete jobs > ask the above mentioned number of jobs.

• expdp crashes after reaching 99% with - wait for a message unread on the broadcast channel

  Here's what I do:

  I export a complete database of PeopleSoft on Solaris 10 using EXPDP.

  I am performing the task as the SYSTEM user and dumping out standard time and labor in a log file.  The $TODAY is just a variable export stamp date.

  
  It's my run line:

  expdp PARFILE DUMPFILE=psptst.$TODAY.f%U.dmp USERID = SYSTEM expdp.par = / * logfile = expdp_$ ORACLE_SID. $TODAY.log

  My parfile looks like this:

  DIRECTORY = data_pump_dir

  FULL = Y

  PARALLEL = 8

  CONTENT = ALL

  exclude = pattern: "IN (select username from dba_users where useridentifier < 54)" "

  I'm running the command on the same server where the database is located, I have plenty of space.  The server is a Solaris M5000 with 64 GB of RAM, a lot of CPU power and it is the only database running here.  I also close the database and he grew up in restricted so mode nothing else can connect to it since this export is for the migration to Linux and 11.2.  The current database is 11.1.0.7.5.

  My short for export until that strikes it full to 99% then crashes just for hours, and never ends.  I checked the TOAD jobs and all the worker nodes are ASSETS, but the dump file, the file log and standard file are all NO more.

  Here is the output of STAT when I connect to the use of data pump:

  Export > stat

  Job: SYS_EXPORT_FULL_01

  Operation: EXPORT

  Mode: FULL

  Status: EXECUTION

  Bytes processed: 145,006,844,064

  Completion percentage: 99

  Current parallelism: 8

  Number of job errors: 0

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f%u.dmp

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f01.dmp

  bytes written: 27,062,280,192

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f02.dmp

  bytes written: 23,638,007,808

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f03.dmp

  bytes written: 10,316,234,752

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f04.dmp

  bytes written: 14,783,823,872

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f05.dmp

  bytes written: 22,908,686,336

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f06.dmp

  bytes written: 23,083,012,096

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f07.dmp

  bytes written: 23,221,575,680

  Empty the file: /ora_exports/psptst/psptst.2013.Oct.14.1814.f08.dmp

  bytes written: 57,970,688

  Worker status 1:

  Process name: DW01

  Status: Pending JOBS

  2 worker status:

  Process name: DW02

  Status: Pending JOBS

  Status of worker 3:

  Process name: DW03

  Status: Pending JOBS

  Worker status 4:

  Process name: DW04

  Status: Pending JOBS

  Worker status 5:

  Process name: DW05

  Status: Pending JOBS

  Worker status 6:

  Process name: DW06

  Status: Pending JOBS

  Worker status 7:

  Process name: DW07

  Status: Pending JOBS

  Status of worker 8:

  Process name: DW08

  Status: Pending JOBS

  The status of all the expectations of workers are "wait message unread on the chain."  The said master worker, "the db file sequential read" as he wait status.

  I have tried this with a value of 4 and 16 parallel and get the same result.  I also tried with no parallel set and get the same result after 2 hours it crashes just indefinitely.

  I noticed that once the + treated bytes: 145,006,844,064 hit that number he stops just whatever the parallel level set.  I checked and the MAX_DUMP_FILE_SIZE database is set to unlimited.

  There is no old jobs in the dba_datapump_jobs and the status of my job is RUNNING.

  
  

  The alerts log is clean just redo log rolls that I expect.

  
  

  This has me scratching my head as it appears that the job runs just forever, but don't go no where.

  With the help of the Support of Oracle solution has proved to be something very simple.

  The statistics of the SYSTEM were stale, once updated the EXPDP stole!

  I ran these DBMS (as SYSDBA) positions:

  EXEC DBMS_STATS. GATHER_FIXED_OBJECTS_STATS (NULL);
  EXEC DBMS_STATS. GATHER_DICTIONARY_STATS;
  EXEC DBMS_STATS. GATHER_SYSTEM_STATS;

  The export not only of finishes, he's even faster than before. It has exported the entire base (450GB) in about 1 hour and 15 minutes (in the past, it took more than 3 hours).  I used a parallel framework 16.

• Help formula: count the number of whites in a column "up to the...» »

  name	string	metric
  Matthew		5
  brand		1
  brand	optimusPrime
  brand
  Luke		2
  Matthew	jamesLikesSteak
  John		3
  Luke	lukingGood
  Matthew
  Luke
  John	johnnyPop
  John

  Hey guys - so I do business with a bit of a problem in number. I have a number table - the table above is a simplified representation of the corresponding parts of the table. The left column 'name' is a series of 12 names repeated and 0 missing values. The "string" middle column is a column that has a lot of missing values by a formula based on another column that is not relevant to this problem. Who is not missing is all strings. The problem I have is in the 'metric ': right column

  I am trying to create a dynamic formula which will result in the numbers and blanks, exactly as above. My goal is to create a formula that, for each line, account the number of whites in the column 'chain' until we reach an empty 'string' which occurs next to "namesake" as in the line of housing the formula - and if there is no such a situation, so that it is empty. For example, if the second row (including header row) bears the name of "Matthew". The next time that a white 'string' occurs next to the name "matthew" is tenth. The number of whites that occur between the second row, and the ninth is 5 (lines 2, 3, 5, 6 and 8). I manually coded a small part of the table to use something like this (which would be installed in cell C2 in this example):

  = IF (B2 = "", COUNTBLANK(B2:B9), "")

  This formula produces the correct number for the first row of data (5), but it does not dynamically fulfill what I'm trying to do this since I am currently having the formula to find the next blank 'chain' that occur next to "name" in the formula line.

  I hope that someone has encountered anything like this before. I tried to go through all the functions and numbers from formulas, but so far I have not found much success.

  Hi BaronDe,

  I need to ask, "why you try to do this? So what you want is possible it will be a complex solution. It may be much easier to get your information in a different way. Indicate these blanks?

  You should know that COUNTBLANK() will not count a cell with a formula, even if this formula resolves to «»

  Quinn

• Skype Out SMS - illustrious wrong phone number

  I recently changed my mobile phone number.

  I went on my Skype account, then 'Manage features' and then 'Caller ID '.

  I added my new mobile number, verified and wait 24 hours.

  Then, I deleted my old mobile phone number.

  IE / now is a single mobile phone listed in 'Caller ID' number, and that number is my new number. It all sounds good.

  I then installed Skype on my Nexus 5. Add a new number (my new) so I could send a test SMS to myself. The SMS arrived, but he showed the laptop wrong phone number; IE / as my old cell phone number and not my new mobile phone number.

  Any ideas what I'm doing wrong here?

  I talked with Skype support team. The solution is to change a setting:

  -Tools

  -Options

  -IM & SMS

  -Settings SMS

  -My mobile phone number. Recipients can send SMS replies: (then select the new mobile phone number)

• Number of Messages appear is not on the icon

  Since a few days ago, stopped numbers text messages appearing on the application iMessage; I receive notifications when the phone is in standby, and while I am on another application (or the home screen).

  I don't mess with notification settings and we tried to restart my phone several times. Has anyone another considering that happen? If so, how can I solve?

  So, please clarify this point... Notifications appear in apps and other things but the number does not appear above the messages?

• with an average of 100 consecutive measurements below a threshold value

  Hello

  I just started programming labview. I'm having difficulties with just this very simple programming code. I was breaking my head all night. I'd appreciate a quick response.

  How can I make a code that would allow an average of 100 consecutive measurements which are below a certain threshold value in labview?

  Thank you.

  Try the joint.  The key is shift registers-(blue) integer is a counter of deca thresholds measures and it returns 0 if there is a measure above threshold the result is saved whenever the counter is greater than 100 (indicating > = 100 consecutive values of 'good'). This also prevents internally while loop and outer loop causes the records to shift to reset.  I added a function to "define the position of the file" then the values will be added rather than overwrite the file.  You will probably need to insert a carriage return in the string that is written in the file so that the values appear on separate lines.  I also changed your data types of DBL - they were I32 (integer) that doesn't seem to jive with your indication that you take analog action.