Number of processors and hardware migration

Similar Questions

• What is the number of processors and maximum memory options in MSCONFIG?

  MSCONFIG (START)... Who can tell me what that? !!
   
  http://www.HTPC-reviews.com/wp-content/uploads/2012/08/speedup_windows7.jpg

  This photo... It's the MSCONFIG window

  64-bit Windows 7

  who can tell me what is 'exactly' the real role of:

  -Number of processors
  -Maximum memory

  because

  I have i7 with 8 processors and when I chose (number of processors) 8 processors, that nothing has changed! It's same as 0.
  and I have 6 GB of ram and when I chose (maximum memory) = 6 GB, nothing has changed, but became 5 GB in the Task Manager!

  What is - c!

  can someone help me please!

   
  Hello
   
  These options to limit the use of processors and memory to the specified value. If you want windows to use all available processors and memory, you must leave two options not controlled.
  When the number of processors option is set to zero, Windows will use all available processors.
  If you recently changed the processors, this may help: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/howto-get-windows-7-to-detect-your-new-multi-core/71519d51-f6cb-47df-b3ff-66c2928d6de4
   
   

  Hope this information is useful.

• Number of processors and cores in AWR report

  Hello

  I have a report AWR to my system and a couple of entries confuse me.

  Q1. It's showing 3 carrots, 2 Sockets and 4 processors. The CPU and the Sockets, I understand that 2 chips with 2 processors per chip so 4 CPU.

  What confuses me, is the fact that it shows 3 carrots. Is that that by CPU cores? Othererwise 3-4 makes no sense?

  Q2. What is the difference between DB, time CPU and CPU DB?

  My understanding is that DB time is the time used by the process, including the time processor and wait time. Because a system can have more than one processor, it is quite natural that DB time may exceed to elapse time - since you have multiple processors that contribute to this time (I guess that DB time cannot be really more time elapse * our processors?)

  In fact, you could say if DB time does not exceed the time to elapse, then you have a Nock idle system?

  My understanding of time CPU, is that it's time where each process actually gets treatment CPU (so it does not time-out). I think that the AWR report confusingly used the term time CPU and CPU DB, to mean the same thing?

  clearly greatly appreciated

  Jim

  
  

  Hi Jimbo,

  Q1. "Nuclei" in the CWA report represents the quantity of physical processor cores and the "processors" takes into account the simultaneous multithreading so in your case, one option could be a CPU Socket has a dual core (not type hyperthreading) and the other CPU Socket has one heart (hyperthreaded). If this is the case, you will have 3 physical 4 CPU cores, (because it takes into account the hyper-threaded architecture) and 2 taken. It's just an option, you will need to check it out.

  Q2. No-Idle wait events are events that are not classified by Oracle as a "Idle" of events to wait wait:

  • Example of Idle wait-event: SQL * Net client message (server process is waiting for the client process to do something)
  • Idle wait-event example: db file scattered read (event waiting user IO representing a multilock read as full scan of the table or full scan small index.
  • You can get a complete list of active waiting events by running:

  Select name from v$ event_name where wait_class <> "inactive".

  • You can get a full list of the events of inactive waiting by running:

  Select name from v$ event_name where wait_class = 'Idle '.

  
  

  DB time is therefore the sum of all events of active waiting and also the CPU time that is a statistic:

  • You can see the value of the amount of time CPU in 10s of miiliseconds (centisecondes) for an exeuting session:

  SELECT THE VALUE

  FROM v$ sesstat JOIN v$ statname USING (statistics #)

  WHERE name = 'CPU used by this session' AND SID =

  • You can see the value of the time total CPU in 10s of milliseconds (centisecondes) for the instance of exeuting:

  SELECT the value from v$ sysstat

  WHERE name = 'CPU used by this session.

• Workstation 7.1 - distribution of cores/processors and nets for guests

  Hello

  Exactly, which is allocated by the parameters 'number of processors' and 'number of CPU cores? The first Option allocates threads (virtual processors) and the second the cores include 2 sons?

  Not very useful to me on page 81 and 367 manual ist. Is there a better source?

  Story: I am about to buy a new laptop that has a core i5 or i7 with two hearts and I think only 4 wires. Now I wonder if I can run two virtual machines at the same time, and how the settings are to do, if I want to allocate:

  (a) the base (or two threads) to a virtual computer

  (b) a wire to a virtual computer

  (c) a single thread to the host...

  is is possible or do I have TO allocate two virtual machines for the same kernel?

  thx for the help

  andyt25 wrote:

  Hello

  Exactly, which is allocated by the parameters 'number of processors' and 'number of CPU cores? The first Option allocates threads (virtual processors) and the second the cores include 2 sons?

  When you create a virtual guest machine, you can choose how many virtual processors (vCPU) there.  If you choose to give it 2 or more vCPUs then the options you listed above control how VMware presents these vCPUs to the guest operating system.

  For example, if you choose to give a comment 2 vCPU, then you can either have VMware to present the guest with 2 core processors (virtual) or a single processor dual-core (virtual).  Things performance will be the same, but this option exists because some software are allowed on a base by processor (instead of a per-core) so there may be an advantage permitted to configure your comments in a special way.

  The settings above have no effect on how VMware plans to run on your host CPU processes.  By default, VMware will use all the cores available host regardless of how you configure the options above when creating your guests.

  Now, with all this talk about several vCPU invited road, I should mention that my experience you will have the best performance if you set up your guests with a unique vCPU.   In a virtualized environment, multiple vCPU / customer does not necessarily in the best performance.  I strongly suggest you create your guests with 1 vCPU and only increase their number of vCPU if tests show that the performance is increased.

  You will certainly be able to run several clients at once on your host computer.  If you persevere with 1 vCPU invited, you will almost certainly run in performance RAM problems or disk well until you encounter problems CPU host.

• PowerCLI - get the number of cores per processor and number of Sockets

  Greetings,

  We are responsible to give a list of all our virtual machines with their host name, the number of CPUs, the BONES and the number of cores per processor for verification.

  I immediately said that this would not be a problem with PowerCLI. However I seem to have more trouble with it than expected.

  Get the number of CPUS is not a problem, but the time wherever I want to divide the number of cores and the number of sockets, it seems to hit a dead end.

  I found the following entries of the community concerned:

  Re: vSphere 5. Casings of vCPU and cores per CPU (PowerCLI) bug

  Machine virtual access avancΘs | VMware vSphere Blog - VMware Blogs

  Parameters to retrieve and set Advanced Configuration (VMX) VM

  But neither seemed to give me the right input. The advanced configuration settings do not appear to contain the number of cores/sockets and Get-View and Get - VM normal controls do not seem to differentiate between carrots and the power outlets and just give the number of processors.

  Because we need these settings for a check I doubt I'm the first to need this information. Does anyone have an idea how to get this information?

  Please note that it is the number of cores and casings of a VM, not an ESXi host.

  Thanks in advance,

  Bram

  	$result = @)
  	$vms = get - view - ViewType VirtualMachine
  	{foreach ($vm to $vms)
  	$obj = new-object psobject
  	$obj | Add-Member - MemberType NoteProperty-name name - value $vm. Name
  	$obj | Add-Member - MemberType NoteProperty - name CPUSocket-$vm.config.hardware.NumCPU value
  	$obj | Add-Member - MemberType NoteProperty - name Corepersocket-$vm.config.hardware.NumCoresPerSocket value
  	$result += $obj
  	}
  	$result

• I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

  I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

  Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

  I'm sorry.

• VMware vSphere 4 licenses essential question and the number of processors

  Hi all

  I have a question about the Essentials of VMware vSphere 4.1 license. We have a client interested in a VMware vSphere Essentials license. The machine runs on 2 x processor Xeon 5675 6 c. Now I read somewhere that there was a limitation of the number of processors that can be used with the edition of Essentials. If I remember correctly, the number of physical sockets is limited to 2, but I remember that there is another limit, but I could not find the document describing and wonder:

  Is there a limitation on the maximum number of 4 cores on one physical processor that can or will be used by VMware vSphere 4.1 Essentials or there is a limitation on the number of 4 vCPU that can be assigned to a guest?

  I would like to know because if this is a limitation on the number of vCPU that can be assigned to a customer that would not be a problem because we have no guests in need of vCPU, then 2 more, but if this is a limitation on the number of cores that would be used by VMware vSphere Essentials, it would be a waste of money to buy a 6-Core ;-)

  Hello.

  2 taken with 3 guests, 6 hearts and SMP 4 lanes for virtual machines.

  These limitations are available at: http://www.vmware.com/products/vsphere/buy/small_business_editions_comparison.html

  Good luck!

• I have a retail version of Windows 7 (home premium). I buy a new motherboard, processor and RAM. Will be my install of Windows 7 function properly?

  As mentioned, I have a full commercial copy of Windows 7 Home Premium and I'm on the point to replace my motherboard, processor and RAM.  Windows 7 will work properly?  If this is not the case, what should I do to make this happen?  Thank you!

  Hello

  With a license for the retail of Windows 7, you can change any material you want.

  You will probably have to reinstall windows 7 as the 'old' motherboard drivers will be always installed on this drive hard (if you use the same drive where Windows 7 is already installed), so that he will probably not start correctly.

  You can even move a license to retail to another computer if that never fails

  The rule is: a license for a single installation.

  Here's how to do a clean install of Windows 7.

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And change a large part of the material probably will ask you to activate again.

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  9. If the automated Service is unsuccessful

  (A) if the automatic activation service informs you that she has failed and cannot help with activation, then STAY ON THE LINE and your call will be transferred to an operator of activation which will help you to activate your copy of Windows 7. If you get suspended under all pending, then phone back, but this time DO NOT respond when the ansafone asks what service you need (twice). This puts in the queue to speak to an engine and does not appear to expire so fast. The operator will give you a confirmation ID number if they accept that your copy of Windows 7 is legitimate.
  NOTE: The operator just explain your situation and what you did to require activation. (EX: hardware upgrade, installed Windows 7 on a new computer after uninstalling it from the old one, etc...)

  See you soon.

• Satellite A500 - upgrade the processor and RAM void my warranty?

  I have a Toshiba Satellite A500, and I think to upgrade my processor CPU and RAM. If I open it invalidate or do I need a Toshiba authority to open it? Removes the card RAM will void the warranty?

  All I need to know is that can I put RAM and CPU processor without voiding the warranty

  Hey,.

  If you upgrade the CPU, you will cancel the warranty because this upgrade is not supported from Toshiba.
  In addition, I put t understand why you buy a laptop, and then you think of some hardware upgrades. In your case, I'd rather bought a laptop with faster processor and more RAM.

  See also this article from Toshiba:
  [Is it possible to upgrade the CPU or GPU of a Toshiba laptop computer? | http://APS2.Toshiba-tro.de/KB0/TSB9401AX0001R01.htm]

  Finally and above all a RAM upgrade is not a problem. So check your user manual how to do this.

• Determine the number of traditional DAQ hardware using Labview.

  Hello

  Anyone can answer the question:

  Regarding materials traditional DAQ, for example the DMM OR-4060, how

  can I programmatically determine the number of device which can be seen in MAX?

  With the help of Labview 8.5, I looked into the following function libraries:

  NOR-DMM

  VISA

  NOR-ModInst

  None of the libraries above seem to provide access the number of traditional DAQ hardware

  property, which is automatically assigned.

  Background:

  I have a 18 PXI chassis containing 2 DMM, in housing 3 and 14.

  The DMM may be a mixture of type OR-4060 or NOR-4070.

  The system is controlled by a Teststand sequence employing IVI - DMM

  steps.

  When you set the IVI logical name step, I am referring to IVI device defined Sessions

  Max - rutime determined.

  Labview VISA functions using I can determine the model, i.e. 4060 or 4070.

  Because the DMM just locate into the slots 3 or 14, then the devices NOR-4070

  are accessible using the following descriptors of resources: PXI1Slot3 or

  PXISlot14.

  (The 4070 is compatible DAQmX.)

  So for devices OR-4070, I can predefine 2 Sessions of IVI device, knowing

  It will be sufficient for all occasions, when I run my Teststand sequence, which will be

  determine what device session to use at run time.

  But I'm stuck for the NOR-4060.

  At the Session of the device, I have to give a descriptor of resource the following

  format: DAQ::x (where x is the device number)

  I could create device 18 sessions each reference to a different DAQ::x, but to select

  the good pair during execution, I would need to programmatically determine the device

  number, i.e. the value of x.

  Where my question.

  The closest I came to a solution was an entry of the Knowledge Base that said that the

  Assigned device number would be the same as the slot number, providing the

  Number of the device had not previously configured manually.

  Unfortunately, our device numbers have been changed manually and maybe in the future.

  All popular solutions.

  Gary.

  Hi Gary,.

  Good afternoon and I hope that your well today.

  Thanks for your post and I want to help you solve your problems.

  I don't think there is just a function that you can use to identify and collect information on all cards with your. For traditional DAQ devices in particular I suggest using the Information.vi of DAQ devices get.

  If you look at this link,

  SAL posted an example VI entitled, find dev trad.vi.

  You can get information such as serial number, Dev name and the Base address.

  The assistance of the respective drivers to collect information you could generate an array of strings with the information that you need all the slots.

  Please let me know if this is useful at all,

• Question about processor and Windows. need to answer accrdingly to discription below. ?

  I use windows xp. on cpu 2.4, 1 gb ram and 256 of the hard drive. and I am aware of two pins in my processor is broken by the heat of combustion. the system still works fine. but the only problem that I face is that it takes 3 x the normal time to copy the data from the drive usb or vice versa...  This is: it is because of the processor broken pins to copy slow. and is there a way to solve via software system say avoid those specifice pins or some how? ?   Hopefully the issue is understandable. answer please...

  Pins broken on a processor and things still work, and your concern is slow copy?

  What is "thermal burning?  You can expand on how these pins really broken?

  There is no software (that I know) to "move" broken material as you describe.  You would be better to spend a little money to find a replacement processor or a replacement processor and motherboard that will accept your current memory, etc. MY HUMBLE OPINION.

  Is * only * the cause of your slow copy - questionable.  Save more explanation of what happened to the pins of the processor - I suspect there is other damage suffered by the system, you don't even know of which could cause slow best USB.  Something with the motherboard, possibly.  Specifically the same USB ports.

  I mean - you could back up everything, perform a clean installation of the operating system and see if it works better after loading the latest drivers form the manufacturers of hardware components in your machine costs and clean...  Otherwise - shot in the dark so that blindfolded and ignoring obvious cries of "stop, don't shoot."  * smile *.

  Side also - comment - if there is something wrong * everything * and you declare it here, the system * not * "are still working fine.  * smile *.

  --
  Martin Stanley
  --

• HP laptop - 15-r150sa (ENERG: I want to upgrade the processor and the RAM of my laptop HP)

  I have a requirement for a high quality laptop computer.  I want to at least 16 GB of RAM and Intel i7 processor. Can I improve/replace the newly purchased on my laptop i5 to i7 processor and 6 GB to 16 GB RAM?

  Emergency response please.

  The processor is part of the motherboard. To get a faster processor, it requires the replacement of the whole motherboard.

  Processor Intel Core i7-5500U and 2 GB cards separate graphics 795814-501

  Above is the part number. This part is new and rare and can only be in HP. At this moment, they are not available. I did a complete search on the internet and it does not appear in one of the parts houses so likely you will have to wait a few months for the part joining the supply chain. When it doesn't the price will shock you. As at least $300US, maybe more.

  The RAM is available anywhere. Like this:

  http://www.eBay.co.UK/ITM/2x-8gb-16GB-DDR3L-1600-MHz-RAM-memory-HP-mobile-Workstat-Zbook-17-PC3L-12800S-/191493216820?PT=LH_DefaultDomain_0&hash=item2c95e29a34

  Upgrade memory requires the removal of the motherboard so it would be foolish to do until you are ready to do all the work.

  May I ask why if you need a super-powerful laptop just purchased a kind of average lower of the spectrum? It's always much more expensive try to upgrade a cheap laptop computer than to just buy a high-end establishment at first. It would probably be you will have to return or to sell your laptop and buy a new one with the features you need.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• problem with the latest video games and hardware acceleration card driver is enabled

  When I try to pay games (spieder solitare and othere games who settled on the computer}, I get the message hardwareaccleration is not supported by your video card driver, which could slow down the performance of the game, make sure you have the latest driver for video card installed and that hardware acceleration is turned on.)  What should I do?

  Hello

  1 you get the error message while playing games or only with the games installed in the operating system?

  2. What is the number of brand and model of the computer manufacturer?

  Method 1 : update the drivers

  Click on the following link to get an idea on how to update the drivers

  http://support.Microsoft.com/kb/942462

  Method 2 : Disable Hardware acceleration

  Hardware acceleration

  Let us know if the problem is solved or not.

• Latitude E7450 processor and controller, E - 2, unstable configuration port of the U2715H - two monitors-

  I have two monitors U2715H connected via a CDM-> DP cable each to a docking station E-Port Plus (in fact an Advanced Port Replicator EURO2) in which sits a laptop Latitude E7450 processor and controller. All items are brand new. E7450 processor and controller is equipped with 16 GB of RAM and two graphics cards: Intel HD 5500 Graphics and NVIDIA GeForce 840 M; selection is automatic, which usually means that the 5500 is running. It runs Windows 7 Enterprise SP1 (64-bit). The docking station has apparently DP 1.2 a capacity (for chaining) but DP 1.2 is disabled in both monitors.

  I have correctly configured the system to have Windows desktop space both monitors at 2560 x 1440 resolution, even with screen internal latitude as a third request for an extension to its full resolution (1920 x 1080). The main screen can be set to one of the two (or three) and I can successfully move the sequence of monitors around (left, middle, right).

  There is therefore no doubt about the ability of the system to support the planned configuration. However, when I dock the Latitude (most with the lid closed) and start, most of the time he is unable to restore the configuration of the two external monitors. Some of the symptoms are: one or two monitors go black, indicating the cable connected but no signal from the docking station. If there is a picture on one of the monitors at startup, it may or may not contain the login screen. (I can still log in because I know which keystrokes to send.) If the login screen is visible, it is usually in low resolution. If I have several active screens, but one is black, I can move the mouse pointer (or an entire window) on the screen black (in the middle or on the side), but it is not visible here.

  Both monitors come right out of the box and the only change I made is to move from the DP to the mDP as input channel. I reinstalled the cables and exchanged the cables between the two DPs on the docking station. I turned the market monitors. I ran the self-test the requirements on both monitors. The connection of the laptop on the docking station is a little wobbly, but I use the spacer provided for the E7450 processor and controller and making sure the connection is correct and stable. I've updated all the drivers and BIOS of processors E7450 and controller. I recently saw a reference to a BIOS for the docking station; I didn't know it existed, but I'm not.

  The installation instructions provided with the monitors were a note on consulting the CD provided for the use of the screen to maximum resolution. E7450 processor and controller is not an optical drive, but I read all of the documentation for the monitor to Support technical without finding what whatsoever to shed light on the situation (in addition to ensure that the graphics card and drivers are up to the task).

  Once I connected, I can manage to make it all in order by randomly (?) lower the resolution of the screen, change the position of the main screen (left-center-right), deselection reselection CDM as entry way and forcing other changes. Once the two or all three screens in operation, I can put them all to maximum resolution and beginning of work. However, it is rather annoying and I would like to have a stable configuration.

  The configuration seems to survive power cycling of the laptop / station but not if I also disconnect the laptop. I should mention that when I detach the E7450 processor and controller, I can use it in other configurations, with or without other external monitors through other ports, before turning it off and later re - anchor as described. However, for the first month I had two old non-moniteurs Dell of any resolution (on DVI and VGA ports) connected to the docking station and the configuration is stable, and for years I used for my older Latitude with a docking station that is older, remembering his device between different hardware configurations.

  Please, someone - and Dell support staff in particular?

  (Editing/updating after transfer of the Forum/devices/Forum/computer laptop and video monitors)

  A brief update of the Denmark...

  We have experienced the issue for several months since the purchase of laptops E7450 processor and controller and docks of Port E II.
  (HDMI screens / black screens with flashing DisplayPort).

  But the new Dock firmware A07 21 v3.10.1. April seems to have solved all our problems.

  Here is the link VMM3320 STD HUB Firmware for E5250/E5450/E5550/E7250/processors E7450 and controller:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=FV9KP&FILEID=3535351776&osCode=WT64A&ProductCode=latitude-E7450-Ultrabook&LanguageCode=en&CategoryID=VI

  Best regards
  Martin

• Cannot change the number of processors present on the drive

  Hello

  I am a new user but have searched the forums and FAQS and can't find the answer.

  I have VMWare Workstation Player version 12 for Linux.  Host is 23 Fedora on a processor quad-core i5 with 8 GB of RAM.  Guest operating system is Windows 7.  It's for personal use, so I don't have a license key.

  The question I have, is that several parameters is not editable, especially the number of processors. The selection is grayed out and set to 1.  In addition, the hard drive and display settings (graphics card) cannot be changed either.

  I tried both with the virtual machine off and with it works.  Doesn't make a difference, the settings are grayed out.

  I searched everywhere for an explanation, but have not found a clue.  Help, please!

  Thank you

  DW

  The settings are grayed out when:
  -the virtual machine is running
  -the virtual machine is suspended
  -l' virtual computer runs in background

  If poweroff the virtual machine with a full stop of the guest.
  If it still does not - check if you are the owner of the vmx file