numbering and section options

Similar Questions

• Change the Page numbers and Sections in a book once it's underway?

  CS5.5

  10.6.8 MacBookPro

  I'm working on a book of 450-500 pages with 4 chapters, 150 + images full page of text, end and beginning of information (title page, preface, introduction, table of contents, annexes, glossary, end notes).

  I booked three chapters using the InDesign book feature, now works on the bits before and end and a final chapter (actually Chapter 1).

  I watched the excellent video of Michael Murphy on the feature of the book, and it adds the page numbering and sections before he created the model. I make them after I have chapters in the book.

  A question:

  How can I add a separate paging once I have booked several chapters?
  I also want to add an article and before any style i, ii, iii, etc., and after 1, 2, 3, 4, etc.

  Second question

  How can I add the title of the book to all the pages in the left hand and the title of the chapter on the right pages now? I've never done it in InDesign, and my attempts after reading aid do not work even on a chapter outside the service book. In the book feature, I don't know yet how to start.

  Thank you very much!

  A question: same thing if you are working on a single document to create a doc of island new section where you want and adjust the figures. Numbering book will adjust when you synchronize the numbers in the book panel.

  Two Qusruib: put this stuff on master pages. Title of the book is not likely to change from page to page, then type this information in a text block. To the chapter title, use a running Header Variable (see variables in the help).

• Numbering in section header

  On a master page, I need to the section number and title of section to display in a header. I'll set up a model for a document with multiple sections and make the transition from Word to InDesign templates has been a bit a break.

  I created a text variable to my heading 1 style and used in my head to show the title of the section. For the number, all I could think was that I need to use a section marker character in the header and had to manually specify in the Section marker box in my numbering and section options window.

  (1) is the only/best way to accomplish this task?

  and while we don't talk to the window...

  (2) never enters the Section prefix manually the only/best way to get the section number to show in my footer page numbers?

  

  ID's running header text variables will not capture the digital portion of numbered list paragraphs. Will of the substances. The important difference here.

  Thus, for example, if a paragraph contains the text "Section 1" literal or 'Act I', then a variable header paragraph-based running would display Section 1 or Act I. The author would need to manually enter the appropriate text. While the sections can be moved in a document that a diligent observation of maintenance, it is rare that the acts and scenes from Shakespeare are rearranged.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• I'm trouble getting the automatic page numbering and TOC to play nice.

  Hello

  I use Indesign CC 2014.

  I created a book, consisting of several separate Indesign documents. The page number for the majority of the documents resets to 1, even though the settings are correctly defined:

  

  The screenshot above shows the second document in the book. The page numbers in the document are properly leaving page 13, as long as the previous document finished at 12.

  But see how the book file shows the numbers restart from 1. And they do the same thing on the table of contents:

  

  Here are the numbers .indb option settings:

  

  I think I have these configured correctly, and yet the book file shows each page 1 reset.

  All the documents have the same exact Document number Options, as I showed earlier.

  I even tried to create a file of book .indb nine, but the problem remains.

  I sent the .idml the version files to a friend who has Indesign cs5, and she said they were numbered everything correctly on the two real pages and in the table of contents - she had absolutely no problem on its version. So there must be another parameter/overide/bug on my system that causes this problem.

  I'd love help on how to fix this please.

  Thank you

  Glynne

  Problem solved!

  I came across this post (Re: automatic numbering does not work in the files of the book of) and the fix was: preferences-> General-> Page numbers and put it in the Section numbering. I had already been advised to have as absolute numbering, but once I changed it, the problem is resolved.

• I have 2 different styles for the reference numbers and the reference text?

  Hello

  I have a document with a lot of notes.

  I would attribute all reference to a character style numbers and all of the text in a different character style.

  For example, I would like to have numbers in bold and black, while the reference in light and dark grey text.

  Doing this manually is not an option of course.

  Is this possible?

  If this is not the case, is there scripts out there that can control it?

  Thank you

  Federico

  It's easy to do.

  1. A Style of Chyaracter for the reference number of the ridge.
  2. Implement the paragraph for the reference text Style.
     1. Go to the nested Styles section
     2. Select the character Style
     3. Apply it to the first separator symbol specified (as tabulator) you chose when you set up your notes.
  3. Use it. It will apply automatically. Of course, you must choose the paragraph Style reference in the Set Up parameters of reference from the Type menu.

• Cannot change in capital letters, numbers and punctuation in mode of handwriting on the rotor.

  When using my phone with the rotor on writing, I am able to change the settings in capital letters, numbers and punctuation by sliding 3 fingers down vertically, however I can't get it to work on the iPad. Can anyone help please?

  If you use two VoiceOver and zoom in on your iPad, try to temporarily disable the zoom. I found that I can not change handwriting options when the zoom and VO are enabled.  -AJ

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make permanent changes in the files? Know how always have "List view" and the option "sort by: Date of change?"

  It is so annoying to have to change my folders in the list view, whenever I open them. How do I change so by default, all my files are presented to the list? I have no other views and want just all my folders in the list view at all times.

  Also, I hate having to click on "sort by...» ' and then 'more' and then 'Update' everytime I want to sort the content of one of my folders to update. How do "Sort by modified date" a default option in the menu "sort by" without having to click on 'more' every time? I just want to do a right click and then be able to sort by modified date.

  I would appreciate help. The way I have to do now is a huge waste of time.

  You should be able to define a file / print this page as you like.

  Click on organize upper-left.

  Click on the folder and search options,

  Click on the view section on applied to the folders listed on top.

  Then click on apply and OK on the bottom.

• I can't find my pen and touch options in hardware?

  I have an Asus 8 Windows touch screen laptop. A few days ago, I opened my laptop only to find the touch of the screen no longer works. I did a lot of research and have not found anything useful. My pen and touch option, as well as my touch screen calibration, disappeared. I don't know what could have happened to cause this. I can provide more information if needed, although I'm not savvy computer 100%. I hope this is the right section. Also do not know how to attach screenshots. Help, please! Thank you.

  Method 1:
  Troubleshooting after he says "enable USB Input Device. «Apply the hotfix to.»
  Troubleshooting completed: Troubleshooting failed to automatically correct these questions
  found. You will find more details below.

  Problems encountered:
  Peripheral input USB is disabled (fixed)
  Hardware changes could not be detected (detected)

  This was one of the first methods I had tried when looking towards the top of my problem, but for reasons that I don't remember the procedure had not worked. I went through these steps once again, not sure if I need to fix the USB input device because I assumed it was my wireless USB mouse that has been disabled. I went through the steps again; fixed the USB input device, and a few seconds later he started working again! My touchpad icon, as well as my pen and touchscreen options and calibration of the touch screen reappeared. Thank you very much! It's a huge relief to have my touch screen works again. You've been a great help, thank you again!

• With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options

  With first CC, I am trying to display the RGB parade. But when I go to 'view' in the settings of the monitor, I only see a "composite video", "alpha" and the options of several cameras. When I look at the tutorials, "RGB Parade" and other display options are there in the video tutorial. But they just do not appear in my software.

  Which version of CC do you use? Numbers, please! And your BONES... and I think you're looking in all the wrong places.

  The CC2015 ranges are found on a "Lumetri Scopes" tab in the top left panel so the color workspace and the central panel Lumetri Scopes tab in the workspace of the effects.

  

  Looks like you're clicking in the program monitor, but this is not where the scopes...

  Neil

• Why a strange alphabet does not appear when I type in an address box. Integration is slow and hesitant and numbers and letters are often repeated on their own?

  I use the new Sierra, but the problem predates this.

  Whenever I am typing a command or an address, a strange alphabet appears with blue letters and numbers below. The stalls, insertion and numbers and letters and then repeat on their own. I can't get out.

  This problem comes and goes, no real reason for when it happens.

  It happens when I type in the Web addresses, etc., and when I type the commands of the operating system.

  Can you give more information on mac hardware.

  You can download and run the latest version 3.0.5 of Etrecheck (etrecheck.com)

  and post it here please.

• App Numbers and keynote does not.

  Hi, I use apple iphone 6 with version 9.3.2,and of past 2 months I am unable to open and remove both apps on my handset namely numbers and keynote. The symbol appears gray in color. Kindly help me on this.

  Hello, try to reset your iPhone by pressing now the sleep/wake and home buttons. It can help.

• How to upgrade my Quicktime 7 Player Quicktime 7 Pro? I am trying to upgrade the application Quicktime 7 and he continues to send me to this information page unrelated to an upgrade or buy and download option.

  I'm trying to upgrade to Quicktime Pro in the Quicktime 7 application and he continues to send me to this information page unrelated to an upgrade or buy and download option. How to upgrade my Quicktime 7 Player Quicktime 7 Pro?

  Unless you already have a QuickTime Pro key, you can't. Apple stopped selling them.

  If you do open it, choose recording in QuickTime Player 7 menu and put your key.

  (143612)

• I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1MK12K6DTY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  I have a Macbook Pro (13 - inch, Mid 2012), processor 2.5 GHz Intel Core i5, memory 4 GB 1600 MHz DDR3 and the serial number C1 * TY3. On the Pages, Numbers and Keynote, y at - it any other way to get them for free?

  < personal information under the direction of the host >

  Only when you buy a new Mac. Since the end of 2013 the app came with the purchase of a Mac.

• Boxes with numbers and letters show rather than some images on some websites

  Yammer.com and linkedin.com, images of icons, such as those that display along the top of the screen are not displayed. Instead, I see a rectangle with numbers and letters. I've seen several articles on the rectangles with numbers and letters that apply to the characters but none regarding images. I also tried the steps described in the article on the resolution of the images is not properly displayed, and nothing seems to work.

  Thank you!

  Many sites now display icons using a custom font. Firefox could not be download and using this font personalized for two reasons:

  (1) Firefox to use your fonts favorite instead of the police of the page; or

  (2) Firefox configured to do not to download fonts.

  For more information, see this thread: Yahoo mail display - action buttons like reply, delete, before them and the colors are not displayed. The solution to "clear the cache" does not help.