% of availability of a server
Hello
Can you please indicate on obtaining the best way to determine the % of availability of a server for a month.
One of my clients need to produce this stat and asked if I could pull this information from Foglight.
Thanking you in advance
Barry
Hi Barry!
I have the answer to this iva e-mail post but his will not be published (())
I wanted to clarify what do you mean under "% uptime? is this response from the server via ping, or services that are running or what?
The best solution, my site is to create separate services and whis server put there, if you talk alone a server
Tags: Dell Tech
Similar Questions
-
When I click on my Firefox icon instead of coming yahoo I get a page that says 410 Gone. Sorry, gone the requested resource is no longer available on this server and there is no forwarding address. Remove all references to this resource. Please check the URL for proper spelling and capitalization. If you're having trouble finding a destination on yahoo try to visit the 'Yahoo homepage"or browse a list of Yahoo online services. Also, you can find what you're looking for if you try searching below (it gives a lookup field). Under the box it says please try Yahoo help center if you need further help. If I click on the homepage of Yahoo words, it will take me to the homepage of yahoo, which is used to make my my just by clicking on the icon of my Firefox. I'd appreciate any help anyone could give me. I deleted Firefox to my computer and re-uploaded with yahoo download but always the same screen when I click on the Firefox icon.
Try resetting your homepage.
https://support.Mozilla.org/en-us/KB/how%20To%20set%20The%20home%20page
-
Logic unit number is not available in ESX Server 4.
Hi people,
Storage guys have mapped the LUN on the ESX Server. But when I check in ESX server using esxcfg-volume - l... LIN is not visible.
However, when I check using esxcfg-scsidev - c... I could see that the LUN is assigned to my ESX server...
Any thoughts here... from front ESX... How can I make the LUN available to my ESX?
Concerning
Sylvie
Is this an existing lun or is a new?
-
Not available on Windows server 2008 r2 64 error ORA-01034 DBCA Oracle
Hi all
I installed oracle 11.2.0.1 on my system operating system Windows server 2008. Then after that through DBCA I created the database while I had oracle ORA-01034 is not available. If any body knows how to solve it please answer me.
Thank you and best regards,
AryaHi Arya,
SID and ORACLE_HOME value correctly.
--
Bala :) -
Not available in CF9 server monitoring?
I connect to CF on my Mac server admin and click on "Server Monitor" under the heading "Monitoring Server.
The display shows: "this function is not available in this edition of the ColdFusion server.
I have Standard edition and you have updated to version 9.0.1
But Monitoring Server appears clearly as a feature, even in the Standard edition.
Serve Rmonitoring is a characteristic of the company, it is not available in standard edition.
Here is the feature comparison matrix
http://www.AdobeSystems.ca/sea/products/ColdFusion/PDFs/cf9_feature_comparison_matrix_ue.p df
-
Comments-OS 64-bit supports not more available on the server?
Hello
on an ESXi server 64-bit RHEL 5 ran very well. After a service for this dell server problem, we got a new, but same mainboard. But later my RHEL does not start with the message:
"Your CPU does not support long mode. Use a 32-bit distribution. »
My conf system:
1 x CORE 2 DUO E6400
4 GB OF RAM
Intel 975 X Express Chipset
and this is the vmx file:
config.version = '8 '.
virtualHW.version = "4".
floppy0. Present = 'false '.
NVRAM = "Wiki.nvram."
deploymentPlatform = "windows".
virtualHW.productCompatibility = "hosted".
Tools.Upgrade.Policy = "upgradeAtPowerCycle".
powerType.powerOff = 'soft '.
powerType.powerOn = "default".
powerType.suspend = "default".
powerType.reset = "default".
displayName = "Wiki".
extendedConfigFile = "wiki.vmxf".
memsize = "256".
ide0:0. Present = 'false '.
ide0:0.clientDevice = 'true '.
ide0:0. DeviceType = "cdrom-raw"
ide0:0.startConnected = "false".
floppy0.startConnected = "false".
floppy0.clientDevice = 'true '.
ethernet0. Present = 'true '.
ethernet0.virtualDev = "vmxnet.
ethernet0. Features = "15".
ethernet0.networkName = 'Wiki network'
ethernet0. AddressType = 'generated '.
guestOSAltName = "Red Hat Enterprise Linux 5 (64-bit)"
guestOS = "rhel5-64.
toolScripts.afterPowerOn = 'true '.
toolScripts.afterResume = 'true '.
toolScripts.beforeSuspend = 'true '.
toolScripts.beforePowerOff = 'true '.
scsi0. Present = 'true '.
scsi0.sharedBus = 'none '.
scsi0.virtualDev = "free".
scsi0:0. Present = 'true '.
scsi0:0. FileName = "wiki.vmdk".
scsi0:0.mode = "independent-persistent."
scsi0:0. DeviceType = "scsi-disk" hard
scsi0:0. Redo = «»
floppy0. FileName = ' / dev/fd0.
VMI. Present = 'true '.
tools.syncTime = "true".
ethernet0.generatedAddress = "00: 0C: 29:4 c: f8:09."
sched.swap.derivedName = ' / vmfs/volumes/493794c0-587c5c00-3928-000102df12eb/wiki/wiki-2502db46.vswp '.
ethernet0.generatedAddressOffset = '0 '.
evcCompatibilityMode = "FALSE".
SCHED. CPU. Max = "4064.
SCHED. CPU. Units = "mhz".
SCHED. CPU. Affinity = "all".
annotation = "a minimalist linux running TWiki.
SCHED. CPU.min = '0 '.
SCHED. CPU.shares = "1000".
sched.mem.MinSize = '0 '.
SCHED.mem.shares = "1000".
SCHED. CPU.htsharing = 'none '.
bios.forceSetupOnce = "false".
tools.remindInstall = 'TRUE '.
UUID. Location = "56 4 d b 14 43 3, 91 b1 1 a - ed 9th 0f f6 04 4 c 09 f8.
UUID. BIOS = "56 4 d b 14 43 3, 91 b1 1 a - ed 9th 0f f6 04 4 c 09 f8.
hostCPUID.0 = "0000000a756e65476c65746e49656e69".
guestCPUID.0 = "0000000a756e65476c65746e49656e69".
userCPUID.0 = "0000000a756e65476c65746e49656e69".
hostCPUID.1 = "000006f2000208000000e3bdbfebfbff".
guestCPUID.1 = "000006f800010800000002010febfbff".
userCPUID.1 = "000006f2000208000000e3bdbfebfbff".
hostCPUID.80000001 = "00000000000000000000000120100000".
guestCPUID.80000001 = "00000000000000000000000000100000".
userCPUID.80000001 = "00000000000000000000000120100000".
Any ideas what could be wrong now?
Kind regards
Robert
Start your server and enter the BIOS Setup. Locate the setting for VT and activate it.
Lars
-
When will it be available CS2 Activation Server
Given a patch of reactivation by user help yesterday, but it seems the server has been unavailable since Dec 13 - it's something cheap...
The activation for CS2 server was finalized. Please see http://forums.adobe.com/message/4919014#4919014?sdid=KCHDS where this topic is discussed.
-
Validate the availability of the server with utl_tcp
Hello
I am using plsql code to process a request and return a URL valid (a kind of load balancing between two hosts). For example, a request for an Oracle Forms Server and the database could return one of these two servers: http://host1.domain.local/forms/frmservlet?config=x and http://host2.domain.local/forms/frmservlet?config=x. The thing is I need to validate that the host is accessible before going back to the user.
I tried with utl_tcp.open_connection and UTL_HTTP.begin_request (which I guess is using utl_tcp), but if a server is down the timer will be exceeded only after 20 seconds, which is average in time for the user. Is it possible in PL/SQL to open a connection and timeout after 2 or 3 seconds or do a ping to a server? If this isn't the case, I think I'll create a JAVA class.
Thank you
FrancisIs it possible in PL/SQL to open a connection and timeout after 2 or 3 seconds or do a ping to a server? If this isn't the case, I think I'll create a JAVA class.
Probably, you found this link yourself?
-
JRF extension is available for the SOA server?
Hello
We want to deploy an ADF based on SOA managed server, I understand that ADF requires Java Runtime Files (JRF) extension.
This extension is available for the SOA server? I am aware that it is available for weblogic server, but we will not use the weblogic server, we will be deploying on SOA managed server?
Thank you
Two misconceptoons here:
1. the COMMON declaration form files are not installed on default WLS, they must be installed. For example, the Runtime of Development Framework Applicetion. The COMMON declaration form files are included in any Oracle product installation that uses (eg. Enterprise Manager Fusion Middleware control).
2 SOA server is usually called SOA suite and running on WLS. More SOA includes the JRF.
Hope this helps,
-olaf
-
Hi all
I need your help.
I have a printer (Photosmart C7280) and I need to install it in the operating system Windows Server 2003 but, unfortunately, theres no driver available for Windows Server 2003.
Anyone know where I can find a compatible driver?
Thank you
I have an idea that can help solve your problem. Please keep in mind that the below solution NOT an official solution of HP and you are try this at your own risk.
- Download HP Photosmart basic driver from the HP website.
- Double-click the downloaded exe file
- An installer is displayed. Click 'Cancel' to end
- Go ' Start-> Run ", type"%temp%"and then enter. The Exploer will direct you to the temp folder
- Look for a folder named "7zS1.tmp" (or similar) and open it
- Autorun.inf open with Notepad
- Go to the section [SystemRequirements] (not [SystemRequirements.600] or some other qualification)
- Change the value of the key 'oslist' in this section: "oslist = 500, 501, 501_64, 600, 600_64, 502, 502_64.
- Change the value of the "warnproducttypelist" key in this section: "warnproducttypelist = 0".
- Change the value of the "blockproducttypelist" key in this section: "blockproducttypelist = 0".
- Save the file
- Run setup.exe and let the installation program
- When you connect the printer to your computer, 'New hardware detected Wizard' may appear. Please choose "Install from a list or specified location (advanced users)" and click on ""next "".
- In "Search for the best driver in these locations.", check "include this location in the search:", go to the "7zS1.tmp", mentioned above and click on "next".
- If a "Hardware Installation" warning dialog, click "Continue Anyway"
- Click 'Finish' to close «New hardware detected Wizard»
- Please note, step 13-15 can repeat several times
Please let me know how it works for you. I'm very interested and want to help.
Good luck!
Message edited by Richard_Wang on 06/15/2009 12:57 AM -
Availability of the critical apparatus report shows too many bars, not enough host names
Hello
The availability of critical devices report includes a graph showing the availability of each server in the selected period.
On my report, I get 2 bars for each displayed hostname. Maybe the host names are not displayed as there a lot and the report is rendered for optimal playback.
Even when export to HTML and looking at the source, host names are not available to extract and there is no option to export CSV. This is why I'm a bit stuck on how to generate a report with all the listed host names and their availability without going into the backend database.
Any ideas?
Hello
What version of NMS are you running? The current version shows only one line per device. If you have upgraded and still see this behavior, pleaese reply to this topic.
Thank you
-
SQL Server - HADR always on error - cannot always display on the dashboard
Hey everybody! While we have recently obtained our first availability of SQL Server 2012 running group. We have the name of Group of availability with two nodes for this group. However, I don't know how to turn the dashboard found at [Server] > HADR > always on. When I try to see it from a particular node, I get the following error:
In case you can't read that, the error is "this SQL server version is not equipped to always on the ability." But I am positive, we are currently running SQL Server 2012 and we have a working group of 100% availability. Here you see the version of the server:
Sorry for the blurry photos. If you can't read that, it says that the version is 11.0.3000.0 (SQL Server SP1 2012). You can also see under HADR the always on the icon is grayed out.
So basically I'm wondering if anyone knows what is the problem? Anyone encountered this before? I would not be surprised if it is just a few little configuration or something, but I've searched and can't seem to fix this. Anyway, please let me know if you have any information. Thanks in advance!
For reference, in my view, it is perhaps the issue: https://support.software.dell.com/foglight/kb/123084
Basically, there is just a bug with the version of the SQL Server cartridge I use. Someone on the team in my company will be upgrading to the latest version next week, how I will update this post with the results.
-
Hello
How foglight detect the availability of a server or application?
He's trying to connect all the n seconds? What is the value of n?
Where can we change N?
There are a few datas in foglight tables called availability. They are in percentage. How this percentage is calculated?
Thank you.
If you are talking to a server or application, chances are you are talking a Java or a .NET Server/application, is that correct?
I believe that we check the status of the server every 60 seconds and we get that server or one who is in charge of the deomain (weblogic admin), Manager of deployment of websphere of Caroline websphere, according to what is watching us.
If you go to the application servers > Administration > list Metrics, you should be able to see if a measure is something we get directly from a server, or if a measure is a derived measure
If it is a derived measure, you can go the derived parameters management see how it is calculated
I hope this helps.
Golan
-
How to check the JSON object properties available
Hi I have a JSON of WebService object.
How to check the available JSON object?
ex JSON:
{
name: "someName".
DESC: 'someDesc '.
}
How to check the available name?
Because sometimes not available from the server name properties
void MyClass::httpFinished(QNetworkReply* reply) { QString data = (QString) reply->readAll(); bb::data::JsonDataAccess jda; QVariant variant = jda.loadFromBuffer(data); QVariantMap variantMap = variant.value
(); QString name = variantMap.value("name").toString(); } I want to hide component Label on my .qml if name not available from webservice.
Thank you
Kaz32 wrote:
Hi I have a JSON of WebService object.
How to check the available JSON object?
ex JSON:
{
name: "someName".
DESC: 'someDesc '.
}
How to check the available name?
Thank you
If you want to check if the name is available, you must use
bool nameExists = variantMap.contains ("name")
-
How can I connect to an office server when you install a new computer on a network?
I was given the web address of 192.168.1.250 by computer scientist who created the network originally.
It is not specifically a "web address", it is more generically known as an IP address (actually that particular address cannot be used on the internet).
A simple check is to open a dialog box run (Windows and "R" key) and in the box, enter \\192.168.1.250.
This would bring a list of the actions available on the server, however, the user account on the PC must match a user account on the server. If it is not then a dialog box opens asking for a user name and password which must be a server recognizes.
'Servers' can be a number of different PC configurations just another delegate to host office files to a file full of breath and the print server in an Active Directory domain. How to make this connection at all times will vary and your "computer" should have been there with you.
Maybe you are looking for
-
Important: Solution workaround to fall immediately SkypeOut call in Skype 4.0
As I spent about 8 hours of my life on this question with the help of Skype you guys give a work around if you are not able to place SkypeOut calls from your Android device. This problem concerns new facilities of Skype 4.0 for Android. On my Samsung
-
HP 7520 - cannot print custom size of the photo tray photo
I am trying to print a photo of small 2.5 cm wide on a 4 x 6 "piece of photo paper. If I choose the "custom" paper size then I can select 4 x 6 on the right and put 4 copies of the photo on the sheet. But when I click on print it always goes for the
-
I have feceived a unsolicited phpone appeal (Mike), whose number was 134, 7809670 asking me to turn on my competitor so that it could solve the problems, he has alleged have been reported to MIcrosoft. Is there such a monitoring system or the fraudu
-
Smart Pro MW1 wireless headset - software 0.1.E.1.5 Playbackproblem
The 0.1.D.0.6 softwareversion is the last where the audio of my S3 is functional. 0.1.E.1.5 is the same as 0.1.E.1.4, its judgment of milliseconds to seconds. Luckywise it was possible to go down with the Sony updated 0.1.D.0.6 not as it written some
-
My blueray player does not play discs eray
I have vista windows reinstlled at futureshop, now my blueray player don't play record blueray, visited the sites of sony, download software, but no progress. I would like to help her work begins.