Similar Questions

• HP Omni 10 Webcam does not

  Hello

  I have a HP Omni 10 with Windows 8.1.  Recently, I discovered that my webcam does not work.  Whenever I press the camera application on the start menu, it gives me the message "to start, connect a camera."  I read a few solutions to go to Device Manager and uninstall and then reinstall the device, but I can't find the webcam in the Device Manager either.

  So I guess it has been uninstalled some how.  If this is the case, can someone please tell me how to reinstall, or if it is a totally different question?  Thank you!

  @KCPat - there are several possible reasons for the application of your Omni to camera does not, so perhaps more time than just 'fixing' to find the exact cause. On my own Omni (with devices of work) there's no driver with 'Caméra' in its name. However, when you scroll through the list of drivers, you may identify one or more marked as disabled. The list is presented initially with categories is collapsed, then look inside any category showing a minus sign (-) rather than a Plus (+) next to it. The task manager can also reveal some startup items that may be present but disabled.  Whenever you disable or re-enable the drivers or startup items, reboot your Tablet subsequently to ensure that Windows recognizes the change - even if you're not be prompted to restart via a pop - up.

  There are a lot of dependencies between the Windows operating system components, if precisely identify all tasks activated by individual components of Windows is "above the pay grade" for most of us - including the advisors 'useful' mucking-comments under the hood in a session remotely.  Keep a detailed list of all changes made to the settings the device or start during troubleshooting, so that you can restore them to their original state, later.

  If you get this far without getting your app camera work, the next likely step can be to choose the recovery options. The fastest option "Refresh" does not change your data, but still will require you to re - install extra software from 3rd - party that has not provided by HP or Microsoft. However, before proceeding with recovery options, I encourage you to check with HP technical support 1 & and/or update this thread with all the additional measures taken and your results...

  Good luck!

• MIRACAST DOES NOT

  I just bought the display adapter wireless Miracast for my HP pavilion hp-21 in a calculation.

  I have connected the dongle Miracast with my TV and USB cable for power supply and many alfter tests that I finally got

  the menu on my TV screen.

  However, now I get the error message that says "Wifi is abnormal and I have to restart my machine.

  I removed the device several times and re - connect the HDMI port, but the same message appears.

  I installed EZcast on my PC and I have a menu that is all black with two buttons but clicking either on does nothing.

  So I can't step two to project the screen of my computer, pictures, films etc. on TV.

  Can someone help me.  Microsoft wants $99.00 to try to solve the problem, but I doubt that they know what to do.

  I installed the graphics card from microsoft on my desk but never windows 8.1 find the adapter.  I tried dozens of times without success.

  Help please

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/us-en/document/c04485576

  It uses the AMD (in combination with the processor) graphics card and it does not work with Miracast. As mentioned above, you need video graphics supported.

  Kind regards.

• HP 27 1200 Omni: Game Mode does not work on Windows 10

  Hello

  I just installed Windows on my Omni 10.

  Unfortunately, the game (and TV) mode no longer works!

  In other words, when pushing the nutton game mode, the screen Windows and sound/app continues to operate and on the screen, while there is no mouse or keyboard or remote control possible entry!

  When you press the button mode of the game again, the system returns to windows 10.

  I would not go back to windows 8.1, so hopefully this is a known issue with the right solution!

  @Atripple

  HP has not all W10 drivers for this model.

  Read here.

  http://support.HP.com/us-en/product/HP-Omni-27-desktop-PC-series/5304895/model/5317996/document/c04763435/

  REO

• Omni touch screen does not

  Hello

  Can you please let me know how I can get get my Tablet repaired. The touchscreen is finicky last months, but now it has stopped all together. The only way to use the Tablet is with a mouse and a keyboard. I have restored the right of return to the factory setting, but it made no difference.

  Thank you

  Hi @Jibbsy , welcome to the Forums of HP. I understand that you are looking to get your Tablet repaired. For repair, you will need to contact HP telephone support. You will find the contact information below:

  In North America: 800-474-6836
  Click here to see outside North America

  I hope this helps.

• HP omni 10 windows menu button does not

  Hello world. Just bought hp omni 10 today. And everything works great. Execpt a little question, is that the physical windows (icon) in the tab start menu is not
  Work it vibrates when I press on it, but does not have the windows splash screen which he shud. What's wrong. Pls help.

  So, the problem is most likely being caused by a glitch rather than a hardware failure firmware or software. At this point, your self-service option only will out perform a "factory reset" to restore all the software to the State it would have had to be when you 1st Tablet unboxed. Well that takes about 1/2 hour, it works for most without supervision. Once the initial restore is complete, you can choose to interrupt updates download long enough to set up a user account and see if the capricious key problem has not changed. If fixed, then resume the installation of all remaining updates & retest button. If the problem persists after that, I suggest that you contact HP Technical Support; at that point, they will be probably unable to solve this problem by phone, but I think it will be useful to contact them quickly if the button is not yet answer correctly - and get a file assigned to the incident number. However, if they propose to exchange your tablet, it would be most likely replaced by a remanufactured - device that not an attactive option would consider your tablet is brand new. If all goes well, the location where you purchased your Omni has a relatively painless performance ~ political exchange that allows you to exchange your Omni to another. However, you may file this application number assigned by HP, to convince them to take you harder than a whiny typical...

  Sorry to hear that you are inconvenienced in this way. Please return to update your message with additional details or questions as the product of your adventure...

  Good luck!

• LAN/Ethernet does not not but wireless is... Help, please!

  Good afternoon

  I have a HP Omni-220-1025 and had to have my hard drive replaced, since then that I couldn't go on the internet using the Ethernet setting.  My ISP is here to check the wiring of their place to make sure, and the technician told me that I was missing these drivers.  Not very tech savvy (that I am learning) but I can't seem to understand this.

  Any help will be greatly appreciated.   P.S. The computer also has BEATS Audio which does not work as well... it seems that drivers were not resettled... Just me thank you hike...

  Any time!

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• SimplePass does not work for Web sites after the receovery system

  I recently did a recovery plant system overall condition,

  SimplePass works for the windows logon, but not for Web sites more... no invites her to save new sites when passwords are entered finger print OR interrogate the user on sites that are entered manually.

  I also tried importing my saved identity still no website

  SimplePass 2012 version: 5.3.1.7

  Laptop model: DV6 - A6Y01UA

  CW,

  You did not include the version of your operating system: Windows 7 I guess because you have been deported back to a very early version of the HP SimplePass.

  You must consider that you may have a version of your fingerprint driver that is appropriate (fairly recent) to run a newer version of HP SimplePass.  The fact that the old version SimplePass does not at all suggests that you run the version of the driver 4.3.118.0 - this version of the driver is not compatible with subsequent revisions of the SimplePass software.

  Reference

  HP Pavilion dv6-6c15nr Entertainment Notebook

  • Fingerprint drivers

  If your version of the driver (for your OS) is equal to or newer than those listed here, chances are that you can keep your current licence.

  If your current driver is older than the driver for your operating system,

  then: download and install yet the driver of fingerprints for your operating system.

  sp58834 validity sensor V 4.4.232.0 Win8

  validity sensor V 4.3.205.0 Win7 sp55109

  [Devices]

  USB\VID_138A & PID_0018 = "validity sensors (WBF) (PID = 0018)" "

  ------------------------------------------------------------------------------------------------------------

  • Find, open, and follow the procedure described in the file named:

    Simple Instructions for upgrade HP SimplePass

  • Think about it: If you try to update to the recently released Omni SimplePass program, you will NOT be able to use your webcard .tsd file to import your webcards (websites and passwords) in the new version of SimplePass.  The Omni of SimplePass version is NOT compatible with previous versions of the HP SimplePass program.

  ==========================================================================================

  Finally, you might take a look at the Web page of your computer (under the reference above)-check to other drivers or software that you can update.

• Photosmart 6525: HP Solution Center does not work in Win 10

  I hava 6525 Photosmart all-in-One printer.  I just updated my OMNI from Windows 7 to Windows 10 desktop all-in-one computer and and now the HP Solution Center will not work.  I get 'HP Solution Center cannot work because your installation of the device is not complete. "  The printer works fine; However, I can't scan.  I've uninstalled and reinstalled the printer and the software four times.  Whenever it installs without problem, but the Solution Center does not work.  Is there any solution for this?

  Hello

  The HP Solution Center is not part of the Photosmart 6525 software, it exists on your PC from your previous HP printer and have nothing to do with the new.

  The HP Photosmart 6525 provided with the HP printer Assistant software, to launch this type of HP software in the search bar and open the HP Photosmart 6520 software.

  As a refernce see the section "How can I find HP solutions for a printer manufactured after 2011?" below:

  http://support.HP.com/us-en/document/c02463264

  Kind regards

  Shlomi

• HP PRINT WIZARD DOES NOT

  Recently, I discovered software basic IE my printer that the Print Wizard does not open. As such, I cannot perform all printer maintenance tasks and creates a lot of problems. Someone please help

  Model of printer - HP Deskjet INK ADV 2010 K010.

  OS - Windows 7 Home basic (64-bit)

  Computer model - HP Omni all - in - one

  Download and install the drivers and full software on the HP website.  Try now.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4157330&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4157433

• iPhone 7 more buttons outside does not

  I've had my iPhone 7 + for about 2 weeks now. Every once in awhile all buttons outside to stop, volume up/down, power, home. The home button will still record and push and give the sensation of taptic and touchID works. The phone itself still works and I can answer texts and which do not use notifications.

  The couple spent time he did, he came upon her in about 4-5 minutes, however it was about half an hour and still nothing. I want to restart my phone, but the switch does not work.

  Has anyone seen this issue or know how to fix?

  Thanks in advance.

  I just experienced the same problem on my iPhone 7, I think it's a bug in iOS, but I am using iOS 10.0.2. Power + button low Volume allowed me to turn it off then turn it back on... Apple please fix this bug!

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My iPad Apple 3rd generation wifi + his cell phone does not work

  MY 3rd generation Apple iPad, wifi + cell

  model number MD408LL/a

  Serial number DM * VGL

  THE SOUND DOES NOT WORK

  < personal information under the direction of the host >

  All sounds, or simply notification and sounds apps (for example do music and videos app still have sound)? If notifications and apps you have notifications on mute: on the iPad side switch - Apple Support ? If the sounds in all applications which have tried for example soft-reset/reboot of the iPad, insert/remove the headphones?