One or more agents is not in a switchable State, cannot switch to datasource

Similar Questions

• One or more devices do not support multi-equipment tasks.

  Hello

  I work with 2 X USB series Renault (6356 USB).  I am acquiring data analog voltage of all 8 channels on the two Renault (total up to 16 analog inputs).  I need data acquisition to synchronize and trigger from an external digital source (a signal that I currently wired in A PFI0 of Dev).  I use a sampling frequency of 800 kHz and a 400 kS buffer size.

  I tried to use an express vi for two devices; two separate express vis for each device; and recently changed to DAQmx icons (as seen in the attachment).  Anyway, I get an error (error-201426: one or more devices do not support multi-equipment tasks.).  He referred then DevA and DevB as devices that do not support tasks.  I was under the impression that tasks multi-equipment agree with property X of the series.  I use NI-DAQmx 9.5.5.

  In the attached photo, I left most while loop.  The part of the diagram that I left out is just for viewing and recording of data, I've included parts, I felt it necessary to describe my problem.

  I would appreciate all the advice really.

  Thank you

  Leslie

  I think crossrulz is right. No worries, as they must be in separate tasks, your data is always synchronized as you want. You'll just have to do some things in the software, because not all the data will be returned in the same Bay of waveforms. What you can do is to create two tasks (one for each device), build an array of tasks, and when you do a reading, do it inside a loop for. concatenate the waveforms of each reading and you have a table of waveforms with all your data as if you read it in a single task. You also need to configure your second task to trigger the DevB/PFI0 and divide your trigger wire, he PFI0 wiring on each device.

• one or more files were not imported because he had problems reading of their

  How to import a video to Flash Professional CC 2014? It's already a .flv file but I still get the "one or more files were not imported because he had problems reading of their" pop up

  @

  Flash Professional CC 2014 support FLV videos but make sure you import your videos into Flash AS3 or AIR doc-types only. WebGL and Canvas of HTML5 doctypes do not support videos and therefore import video option is disabled in these types of doc.

• error - services ActiveX one or more controls could not be displayed because that is...

  Original title: error services
  I can't on my firewall
  and I can't even access
  Help, please

  http://3.BP.blogspot.com/-AX8JmL8ZJD0/Ti_u-NG-RHI/AAAAAAAAAEA/9TUi3KU_710/S1600/screen_shot_1%255B3%255d.PNG

  Hi Rahulrahulpz,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps.

• Photoshop error 'one or more plugins are not available on the system. "For more information, see help > system information" [was: plugins]

  Como descarga plugins porque uno o varios plugins not estan available for currently in el sistema por eso como soluciona para estar available in French.

  So an image editor.

  

  Gracias

  Launch of Photoshop with the SHIFT key and select Yes to skip loading additional plugins and check if you get the same error.

• One or more of the resources is not configured correctly.

  All,
  I have a problem when I am trying to disable a user on the user interface, its raise an error saying "one or more resources is not configured correctly.."
  
  Can you please help me understand the question
  
  Thank you
  Preeti...

  You can try to isolate the resource that is the source of the problem, make sure that all resources are having disable trigger mapped in the effect of the task of the task.

  Thank you
  Suren

• HP6520 ALL IN ONE PRINTER: BLACK INK WILL NOT PRINT

  I TRIED ALL THE PROPOSED SOLUTIONS.  NO WORK FOR ME.  I HAVE TRIED SEVERAL TIMES TO RUN THE CLEAN CARTRIDGE HEADS.  SAME RESULT (WASTED A LOT OF VERY EXPENSIVE INK IN THE PROCESS).  ANOTHER USER HAS SUGGESTED TO USE SOLVENT TO CLEAN A CLOGGED INKJET PORT.  I DIDN'T KNOW WHERE REPRESENTATIVE HP APPROVED THAT.  THE PAGE OF DIAGNOSIS THAT PRINTS AFTER HAVING CARRIED OUT THE SYSTEMATIC CLEANING HEAD PRINT BLACK TEXT, BUT THE BOX FOR BLACK PRINTING IS TOTALLY WHITE.  IS THERE ANOTHER SOLUTION TO TRY?  Help!

  The printhead on the HP Photosmart 6520 is not designed to be removable by the user.  While you can find messages with information on the withdrawal of the printhead for soaking, it's really not recommended.  If you decide to do this don't forget to read the entire thread, these discussions often end with a printer damaged due to damage or damage to the encoder system, electrical connectors which can make the printer unusable.

  You may have already taken the steps of troubleshooting in the paper here, if not go through each of them in order.  Check the vents on the black print cartridge and that it sits correctly.

  If the above does not solve the problem you could try manually to clean the printhead, as described in the post here for a different but similar printer.

  Note that the printer uses a mixture of color and black inks to print a diagnostic page.  This is so that the information can be read even if black or one or more colors do not work.  Although it may seem from this page your black works that is unfortunately not.  You can simulate this by selecting "Photo paper", as the media type in the driver, it would force the printer to use the same color ink to print black text.

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• When sending an Email containing pictures, I get the Message "one or more of the images could not be sent" in Windows Live Mail.

  When sending an Email containing pictures, I get the Message "one or more of the images could not be transmitted. When I send this message to my address, I see the little red X in place of the image. How can I fix it?

  original title: Live Mail

  Hi donabell,.

  Thanks for posting your question in the Microsoft answers Site Feedback forum. Your question it will be better answered by the experts in the Windows Live Solution Center. Please repost your question here.

• I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.

  Hi facions.

  What browser do you use?

  If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• sound recorder, no not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again.

  I tried to use sound recorder to test a microphone and it came with an error message after pressing the record and then he said, sound recorder, not stop not enough memory available to complete this operation. Quit one or more applications to increase available memory, and then try again. This issue is out of nowhere because he has never had this problem before. It's a brand new computer that ive built from the bottom up, and I have 4 GB of memory. only a little more than 2 is actually identified by windows xp, however. Ive looked in the Task Manager and it says I have 2 GB of free, so I don't know what to do

  Hi superconfused123,

  This problem occurs because of a design limitation in the tape recorder.

  You can check the link below: you receive a "not enough memory to complete this operation" error message when you try to record a .wav file using sound recorder: http://support.microsoft.com/kb/284893

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• One or more CD/DVD drives are not able to burn?

  One or more CD/DVD drives are not able to burn what can I do to fix? I have window xp gateway gt4010

  Hi skywalker918,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. you have any third-party DVD burning software installed on the computer?

  Refer to the article below and run the Fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Also check the condition of the disc on the computer using Device Manager and the post is back with the details.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Taskmgr.exe does not work. error when you run gpedit.msc: "one or more activex controls could not be displayed either...". "- old deleted restore points.

  Dear all, Hello, hope you are doing well.

  
  

  My thinkpad t42 machine with xp sp3 OEM has a problem, unfortunately.

  Task Manager is not running.  A small timer appears when ctrl + alt + delete is pressed. nothing happens.  Taskmgr.exe fact exists in the system folder.  This has been verified.  The same thing happens when you try to start the program via a double-click; nothing.

  When checking to see that the Task Manager was not blocked under the administrator account, there was an error in the gpedit.msc program - namely:

  internet Explorer: "(one or more ActiveX controls could not be displayed because either (1) your current internet security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls." As a result this page may not display correctly. "It is a double popup as well.  When you press ok, the same error message box appears again.  Reset all settings of security of IE8.  Made no difference.

  the same error message is produced with the software lenovo "thinkpad update" - once again in the framework-

  
  
  

  Someone (not me) downloaded a program called "personal internet security ' on the machine and also a"registry fix"program that has an icon of similar colors to the windows logo icon, but the colors were reversed (the name of it escapes me) - these programs pourrait the root of the problems and why the machine does well.

  To solve; First, Avast has been run on boot to the top, and about 8 programs have been removed.  (Some of these programs may have been dependent on or related to another...)

  Then, microsoft's free antivirus has been downloaded - but - it wouldn't install, giving a general error.  The same error was given, for Microsoft security program, when Avast was uninstalled.

  A Microsoft security scan is run from the Web site then, and he says that the computer is virus free, even if it has changed some previous registry changes.

  To fix the Task Manager, difficulty in registration of Microsoft was found to be proposed here -http://support.microsoft.com/kb/907343 - but then there was a '0' already in the field.

  Having become frustrated with all hacking around records etc, it was decided to go to an older Restore Point.  The last of them visible was in December, and it would not actually go to these old restore points.  The error said: Please try a different restore point.  Having received updates xp at the same time to that, these restore Points have unfortunately disappeared and no restore points exist where the system is stable.

  If someone like me that the machine still has something?

  If someone could suggest a solution for me that would be great and would really make my life less busy in trying to solve this problem - my area of expertese is certainly not it if someone could help me it would be very much appreciated...

  Sincerely,

  D

  The process of deletion for Personal Internet Security 2011 is well documented.

  It is not some ' try it or try things "and see if it works the kind of process.

  You won't fix with Avast, and a large number of malware just laugh at all Microsoft malware detection and removal products.  There is little to fear Microsoft analysis tools.  I can get my system on purpose infected two dozen ways and Microsoft will tell me that there is no problem.

  Removal and detection of malicious software is not Microsoft expertise area.  There are businesses where malware detection and removal, it is their area of expertise, and that's all they do throughout the day, so you better stick with them for the easy stuff.

  You will not fix your system and try things or any amount of piracy.  It will fix you knowing what you're doing and using methods that other people have already understood by the practice and the real real world situations.

  If you want to remove it and do not have to reinstall your XP, you should consider going to a forum where malware removal experts hang out.  You know... people who really know how to actually remove the stuff and did it successfully.

  This means that people have got their systems infected by the malware on goal several times and practical detached until they understand the malware and how it works well enough to write a removal procedure.  They did try them all things for you.

  You can mess around with other things to try that perhaps sometimes could work, or you can follow the procedure who already figured that will work all the time.

  If you faithfully follow the removal instructions and you still have questions, there is link at the bottom of the instructions for further help.  Although everything that has already happened or attempted to apply may have complicated your situation beyond the reasonable expectations of repair.

  Here is the link with the instructions to get started:

  http://www.bleepingcomputer.com/virus-removal/remove-personal-Internet-Security-2011

  It's my contention that, once your system gets afflicted by malware of this magnitude, you should not trust any of current Restore Point.  When finished remove malicious software, all your Restore Points are not trustworthy and you must knock out all and start over with new Restore Points.

  If you want to get your task manager will, navigate to c:\windows\system32 and make a taskmgr.exe and call the copy something like jose.exe.

  Then you will be able to launch jose.exe (double click), and the Task Manager opens.  The malware will not allow taskmgr.exe to be a running process, because he knows that's what you use to try to remove it.  So far, malware knows no jose.exe (this may change).

  You will probably like Process Explorer better when even when you get the hang of it, but you can get your task manager go.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  Well this problem started a week ago. When computer first starts or restarts (I did not open any program still!) I get this message,

  One or more ActiveX controls could not be displayed because that is: 1) your current security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls

  I know this usually occurs with internet explore, but as I said I do not have anything yet open. I've activated all the active X controls in internet explore with no luck. I searched the web for active x forums and blocked the editor and followed all the instructions in the error message (most of them see enabling active x) but without success. I am an advanced user (15 years and more), but it has left speechless me. If I try to open "Services", I get the same error. When I opened my anti virus, it opens but it is just a blank page. I know that my anti virus is working well.  Also if I open internet explorer, I get a blank page, if I go to a website (enter it or go to my favorites) it works fine. I've deleted all the temp, historical, cookies etc. etc. (use CC Cleaner and other programs to clean) but if reopened once again it says white. If I use help and you want to see a help topic that it is said (may not display due to problems of congestion or network, check connection) but internet works fine. I know that I have not a virus (a lot of people in the forums think it) I scanned with Bitdefender, Eset Nod32, Super Anti Spyware pro, Malaware Anti Malawarebytes, Spybot, Stopzilla, etc. etc. and did not find a virus (in safe mode) there are many people on the web with the same problem (with the same and some with different programs). This problem seems to be random (does not affect a certain program) I tried for a week now and I'm stumped! Anybody have ideas that I heard yet?

  Thank you if you do!

  Hi Morksr2d2,

  As you mentioned that the problem reappears as soon as you run the anti-virus program, it seems that we found the cause of these error messages at startup.  I would like to recommend that you Uninstall the antivirus & check if the problem reappears. This should also allow you to make changes on the services tab in system configuration utility.

  Later, reinstall the antivirus program.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.