Only display in APEX4.0 problem

Similar Questions

• Satellite Pro 6000: display or graphics card problem

  Hello
  I don't have a model satellite pro 6000. PS600E-01NYE-FR
  1 GHz P3, 20 GB HDD, wireless bluetooth not running XP

  I understand that it is an old laptop but had been treated with great care because I got it.
  My problem is the following;

  Startup of the laptop is a route very well, but for some reason together and after no set amount of time the display fails
  a wot is visible on-screen is hundreds of tiny colored blocks, sometimes random horizontal lines
  but nothing is readable, at all.

  I tried to run a yellow one also using the video output external monitor, all appear the same.
  a computer display (although I can't check it out) to freeze.

  I replaced the heatsink fan as a precaution (using the new dough)
  the only solution I can find is replaced the ram with
  2 x 256 MB Sync 133 mHz module Samsung. This could be the problem or can anyone shed some light on this for me.

  Thanks in advance
  Display Toshiba SP6000 (?) Problem

  I am not a technician, but I assume that there is probably a problem with the video card. I'm afraid there is not much to do. You should contact the service and make them run tests to verify the functionality of the video card. If the card is faulty, just replacement will help.

• Satellite Pro P100 - multiple display after Exchange screen problem

  My laptop: Toshiba Satellite Pro PSPA6A-028017 with Nvidia GeForce Go 7900GS

  OK, here's the story. I turned on my laptop about a week ago and the screen is blank. I plugged in a monitor external via AVI and tried Fn + F5, but nothing. When the computer reboots, the external screen worked. When I tried to turn on/off displays the external monitor is turned off and I found myself with an empty screen - I was obviously spent on screen of the laptop but working blind, I couldn't work out how to get the external monitor to start again. FN + F5 did nothing.

  At that point, I called Toshiba for the support of the warranty (on-site, next business day). They had a technician with new monitor/display on site the next day (after a few calls me to follow up). It has replaced the screen but struggled to lift the screen up and running. He finally managed to logon Windows safe mode and get running but only display on 800 x 600. It has updated the Bios and drivers. He could then up to the 1024 x 768 resolution. Highest and the screen would be left empty.

  At that time we plugged in an external monitor via VGA. It worked, but the technician couldn't get the each display to run on each resolution. He left him speechless and he acknowledged that things still are not good. Later, after that the technician had left, I managed to get views working so each to their own resolution. However, I could not always connect the external monitor via DVI (VGA only). I was at least temporarily to work!

  The next morning that I turned the laptop on to find that I was back was started. No display on the laptop and on the external monitor only low resolution. It seems that the external monitor is simply cloning which should show the computer screen.

  Under the display properties > settings the display shows:
  1. (multiple screens) on NVIDIA GeForce Go 7900 GS
  2 Dell G2410 (Analog) on NVIDIA GeForce Go 7900 GS

  I know that when everything is working properly, he said not many monitors. The only screen I see is the Dell external monitor. And when I identify the Dell screen is no 1, even if it's not listed number 2.

  I don't know anything about the cards video etc, but a theory I have is that adapter is defective and is only show the analog signal. That is why I think that the screen of the laptop and external monitor (connected via DVI) works not done the external monitor connected via VGA (but it seems to be imitating the screen of the computer, allowing only the laptop screens range of resolution). Is that possible?

  Someone at - it ideas? The problem is likely to be the video card? I'm puzzled. I'll have to get the technician on the spot back (which will probably still 2 days and several calls, follow-up) and I don't want to lose any time. I have a business to run and I have now lost a weeks work already. If I can offer some strong theories before the technician comes on the spot, sometimes we can get parts ordered in advance.

  My warranty expires in a few weeks, so obviously I want this fixed correctly in the shortest time. I don't want to wait 2 days for a technician to come and have to wait another day or two for parts.

  Help, please!

  Thank you
  Ghjghj

  It is not easy to offer the correct answer and explanation why this happens here on the forum. In laptop cases should be tested with diagnostic tools to ensure that what is the problem.
  OK, exchange of display was a step in the right direction but, of course, this question is more complicated and doesn t happen due to the defective screen only.

  I agree with Akuma and also thinking that there must be a hardware problem on the motherboard. Before the expiration of the warranty, you should contact the service again and let check portable equipment.
  The fact is, if there is that no book of hardware malfunction should work fine preinstalled with delivered recovery image (Toshiba CD/DVD recovery facilities).

  Please, don't wait too long and contact ASAP. They check your laptop. the warranty is still valid and your laptop needs to be repaired.

  Good luck!

• Firefox for Android only displays the desktop version of gmail rather than mobile.

  Android only question.

  I prefer to access gmail via a browser rather than the gmail app. Tests of other browsers on Android (Chrome and Dolphin) I see that they display a mobile-specific version of the gmail Web site.

  Firefox for Android only displays the version of office on my Nexus 7 (5.1 runs Android 2012) - and therefore more difficult to read and use. Any help or ideas would be greatly appreciated.

  Thank you

  Pinellas Chuck

  Well, Yes, it's that Word annoying Tablet.

  What I'm going to describe is difficult to type, so I hope that you can open this page on your tablet.

  Select (0) and copy the following text on your Tablet if possible to avoid the excesses of type:

  general.useragent.override.mail.google.com Android; Tablet;#Android; Mobile;
  

  The forum linkifies this first part, but it is not supposed to be a link.

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type agen and make a pause while Firefox filter list

  (3) scroll down to the bottom and look for a preference named general.useragent.site_specific_overrides and confirm that it has its default value true. If it is set to false, press the reset button for it back to true.

  (4) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference must be general.useragent.override.google. com (for all Google sites) general.useragent.override.mail.google. com (for Gmail only)

  If you type this, beware of the correction automatic insertion of spaces and be sure to remove those.

  If paste, remove the part after that.

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value of the preference should be Android; Tablet; #Android; Mobile; -in other words, substituting Mobile for Tablet.

  If you type, pay attention to the excess spaces.

  If gluing, remove the preference name and extra space before this part.

  (D) then click on create

  If you open https://mail.google.com/ must now use the mobile layout.

  Success?

  Edit: To clarify the name of preference options.

• I get an error 643 since April and unable to install an important update. I tried to download the update, but your instructions on the Web are very confused. It's the only update that gave me problems.

  I get an error 643 since April and unable to install an important update.  I tried to download the update, but your instructions on the Web are very confused.  It's the only update that gave me problems. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  http://support.Microsoft.com/kb/KB976982

  You receive the error 643 0 x or 0 x 80070643 when you try to install the updates of .NET Framework by using Windows Update or Microsoft Update

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/971058

  How to reset the Windows Update components?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Where can I find all my States system restore? When I try to restore windows only displays the States from today until 7 days ago

  Where can I find all my States system restore? When I try to restore windows only displays the States from today until seven days ago.

  I'm trying to find the States of up to a year ago.

  Hello

  system restore points are not here forever

  It depends on the amount of space reserved for restoring the system restore points on how you

  and as a new one is created the oldest one is deleted

  http://www.windowsvistauserguide.com/system_restore.htm

  There is a box to check points over 5 days which must obviously have checked back 7 days?

  or 7 days a rough estimate on your part?

  and here's how to change the amount of space for the restoration of the system increase or decrease to restore more or less points in the future

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  http://www.vista4beginners.com/system-restore-space-used

• I can't open pictures sent in an e-mail message, the item opens in the word pad and only displays the numbers of letters and symbols. What should I do so that he can open it with a picyure?

  How can I get the images to open when I click on the jpeg symbol? It opens in Word pad and only displays the numbers of letters and symbols.

  Save the attachment to your HARD drive. Right-click on it and open with | Choose the program. Find and choose a program that works, and then check the box: always use this program to open this type of file. This should allow you to open these attachments in the future.   Bruce Hagen MS - MVP [Mail]

• How to only display unread Hotmail e-mail?

  How to only display unread Hotmail e-mail?

  I connect to Classic Hotmail and then click Inbox.  my mails are sorted by date, but I can't seem to find a tab that allows me to view only unread mail

  Thanks in advance

  If you use a WEB browser rather than an email client? (This is what I meant by the question "how to access your hotmail account")

  Don't look at as you can. If you want different views of your email, you need to use Windows Live Mail or another compatible with Hotmail e-mail client.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• 'Reader' will only display a PDF file for a second, then here down the PDF file.

  I recently had an automatic update "Reader" and now "Reader" will only display a PDF file for about a second and then closes the PDF file.  This happens to all PDF documents any what scource.  I am running Windows 7.  What should I do to correct the situation.  (Yes - I've removed the "reader" of my computer, re-installed it.)  Did not help).

  Access to 11 C/programs/Adobe/Reader / player.

  Looking for a file named eula.exe (or just eula).

  Double click on it.

  Accept the license agreement.

  Drive should work fine from there.

• IE6 only display problem

  Hi people,
  
  I'm having a problem in IE6 that I can't find a workaround for. I had this problem before, and the work around I used then works now for some reason any.
  
  In a site that I just finished for a customer, the BRANDING div has a gap between her and the div IN IE6. The supplement is:
  
  < body >
  < div id = "container" >
  < div id = "brand >"
  "" < h1 > < a href = "... / home.php" title = "go α homepage" > emilylowe.com < /a > < / h1 >
  < / div >
  < div id = "content" >
  < div id = "navigation > < / div >"
  < div id = "conent_main" > < / div >
  < div id = "site_info" > < / div >
  < / div >
  < / div >
  < / body >
  
  The H1: a tag is a standard image of replacement:
  
  div #branding h1 a: link, etc.}
  background: #FFFFFF url (.. / images/header.jpg) not repeat top left;
  text-indent:-9999px;
  display: block;
  margin: 0;
  padding: 0;
  height: 154px;
  Width: 666px;
  }
  
  Before, when there was space between the BRANDING and CONTENT in IE6, I'd do the H1 tag have the same markup as the H1: a tag. I have that here as well:
  
  div #branding h1 {}
  margin: 0;
  padding: 0;
  height: 154px;
  Width: 666px;
  }
  
  It still did not help IE6 displays the code correctly, so I still added the same markup to the BRAND image tag:
  
  div #branding {}
  margin: 0;
  padding: 0;
  height: 154px;
  Width: 666px;
  }
  
  At this point, I'm at a total loss as to why IE6 shows a difference between the CONTENT of tags and BRANDING. I don't have this problem on any browser on my Mac, and the gap will not appear on IE7 and FireFox 2 on my XP. Only IE6 has the issue.
  
  Does anyone have an idea what I need to apply or delete to help IE6 play nice with my design? The client's site is http://emilylowe.com/home.php . I also discovered this problem on another customer of the site, basically the markup to replace the image on the H1: a tag.

  Osgood,

  Thanks for responding. It never crossed my mind to use a background image for the BRANDING div! Thank you very much.

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• I have problems with the resizing of text box. I can only display width or height not both

  I'm new to Flash, I was able to create the text box and adjust the width and height, but now can only set the width. The box height is unusable. Did turn something off? I use the horizontal mode.

  Steve

  If you have the textfield value "Static Text", then the text space extends vertically so that it contains the text that you type in. You can adjust the width and height will change to accommodate the text content.

  If you change the "Input" or "Dynamic" textfield, then you will be able to resize the textfield that you want.

• Firefox only displays not the complete its preferences window; Why the low option is partially hidden

  Row of the bottom of the Preferences tab windows displays only partially. Well... it's weird... when I opened the preferences window, (to describe correctly the question) and switches between the last row of buttons (tabs, content, etc.), all of the options and then displayed. I wish I had done a screen shot earlier. Actually, it happened... honest!

  You can resize the window by dragging the borders?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• My office only displayed Widget Acer and Windows Live Messenger

  Original title: desktop display problem

  My desktop only Acer Widget & Windows Live Messenger, although my desktop folder contains everything that needs to be rendered outside the basket. There is no problem with the other user account on this computer. How can I fix this problem?

  You have already found the problem, perhaps unknowingly.

  quote... There is no problem with the other user account on this computer

  It is a strong indication that your user account is damaged.

  If it is an administrator account that you are having problems with, please set up another admin first.

  Make sure that the new admin account works smoothly without the display problem.

  Then decide if you keep some of the files for the damaged account.

  If you don't care to keep everything, then simply remove the damaged account.

  If you don't want certain files etc kept, then use this tutorial...

  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

  Note in the tutorial of... To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you just created.

• Only displayed if number of blackBerry Smartphones contact calls

  Hello

  I have a problem with my BB storm. Most of the time if a person who is also a touch of my BB call I can only see the number on the screen and not the name. Unfortunately I don't remember all the phone numbers of my contacts. It would be helpful if someone can give me a hint how to display the name and number on the screen is called a contact.

  Kind regards

  Bjoern

  Hey,.

  at times, I found a solution to my problem. My contacts encryption enabled, I had one it has not been possible for BB affect the call for a contact number.

  Kind regards

  Bjoern