Only once at the start of the first image to sound

Similar Questions

• Where is the best place to 'field of Application only once by application start initiation' coded?

  Dear all,

  Do you have any suggestions on where we should put the opening of scope application code?

  These codes should be used the first time user enter the app, but not every time when you navigate to a new page.

  I use bbUI and currently trying to put it in the webworksready listener in my index.html

  Is this supposed to be invoke only once or will be called each time when I refresh the screen using bb.pushScreen?

  I noticed it was triggerred several times, so this isn't what I want to achieve.

  Any other event listener could I use to put my 'field of Application only once by opening start?

  Appreciate for any suggestion or comment.

  This happens in fact because of the bug of the ripple, this ready recall webworks has been triggerred twice.

  So ideally, it won't be a problem.

• Topics appear twice in the list of topics, however, each does exist only once in the project.

  Some subjects appear twice in the list of topics, but each exists only once in the project files. What are the causes for this and what can do to prevent it? I am using HR 11.0.4.291. I deleted the CPD file.

  Here is an example:

  

  Change in all files in a folder specific to say the first element. There may be two files in the same folder that Windows does not allow that. My guess is that the duplicates are in different folders and change the folder will help you find the original and the duplicate.

  Also open both the list of topics. Should be the red squares in it? If Yes, you have sort of a release in the source.

  Post back with what you find.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Helpppp! my flash table will play only the first image

  my flash table will play only the first image

  This is the code

  stop(); 
  var t:Timer=new Timer(100,0);
  t.addEventListener(TimerEvent.TIMER,preloadF);
  t.start();    
  var rdmFrame:Array = ["15","150","420","589","712","807","1135"]; 
  
  stage.addEventListener(MouseEvent.CLICK, fnClick) 
  
  function fnClick(e:MouseEvent):void 
  {          
  trace(rdmFrame[numberRange(0, rdmFrame.length)]); 
  } 
  
  function preloadF(e:TimerEvent)
  {
      if(this.framesLoaded>7)    
      {
          t.stop();        
          t.removeEventListener(TimerEvent.TIMER,preloadF);        
          t=null;         
          this.gotoAndPlay(numberRange(0, rdmFrame.length - 1));     
      } 
  } 
          
  function numberRange(minNum:Number, maxNum:Number):Number 
  {          
          return (Math.floor(Math.random() * (maxNum - minNum + 1)) + minNum); 
  }
  

  Ned Murphy wrote:

  Back through ALL the suggestions that I offered and use them.

  HA! I'm sucha dooofus!  Yes it works! YAY!

  Stop();

  var t:Timer = new Timer (100.0);

  t.addEventListener (TimerEvent.TIMER, preloadF);

  t.Start ();

  var rdmFrame:Array = [15,150,420,589,712,807,1135];

  function preloadF(e:TimerEvent)

  {

  if(this.framesLoaded>7)

  {

  t.Stop ();

  t.removeEventListener (TimerEvent.TIMER, preloadF);

  t = null;

  this.gotoAndPlay (rdmFrame [numberRange (0, rdmFrame.length)]);

  }

  }

  function numberRange(minNum:Number,_maxNum:Number):Number

  {

  return (Math.floor (Math.random () * maxNum));

  }

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• RAM Preview plays not the first image

  Anyone having problems with previewing Ram replaying from a different place in the timeline other than the first image? I've seen what's happening regularly since the last update (2014.2). I checked my preferences, and made sure nothing is accidentally selected to play the last image key or something weird. But no I'm on a Mac Pro, running from Yosemite, I googled and saw nothing. I have not trashed my preferences again, because I'm not sure that it's a matter of preference and God... If I have to rebuild my rendering implemented once more...

  So, to give you more details.

  -J' hit '0' on my keyboard to launch a ram preview

  -On SOUNDS that it is made each image in order

  -When I type '0' again for reading, it starts from a random location usually 2-5 seconds since the beginning of the timeline.

  -It will make a loop back and then play from the beginning of the timeline.

  It does not use the line mark current time or anything that would make sense. It's random, but shortly after the start. I suspect he pulls a pre-comp nested key frame information and use it, but there is not a keyframe in the computer that I realized.

  I do not have the "current time" box checked in the Ram preview options, and there are 0 skip frames in this setting as well.

  If anyone has any ideas what it can be... I'd be happy.

  Here is the page with the known issues for Yosemite:

  After Effects Mac OSX v10.10 (Yosemite)

• How do I loop back to the first image of the last frame?

  Hello

  I am currently working on the framework for a product Viewer.

  I have:

  a clip called "viewer_mc", which contains the images taken from different angles of the product. The actionscript code generates a script on the last frame of which returns to frame 1.

  a button instance called "autoplay_btn", which plays in the music video of whatever the current image is and stops on image 1.

  a left and right button are used to move the clip from the film frame, to give the appearance that the product is running.

  I managed to make him:

  having the clip play through both, return to section 1 and stop.

  have functions return button when held down, move the image in the clip using nextFrame and prevFrame commands. Right-click successfully continues a loop round the frame 1 and continues operation to give the impression of rotation.

  The last problem I do experience becomes the left button to act accordingly, ranging from the first frame to the last and continues to operate.

  Here are my actionscript so far:

  import flash.events.MouseEvent;

  var lastFrame:Number = viewer_mc.totalFrames;

  var thisFrame:Number = viewer_mc.currentFrame;

  var backFrame:Number = viewer_mc.currentFrame - 1;

  1. This is the part that gets to play through once before returning to the first image. I think that maybe the problem which I am facing is because of the part "viewer_mc.addFrameScript (lastFrame-1, initially)", that is even if I am now the left button, returning to this script and therefor have bounced back immediately to the first frame. However, there is no flickering on the screen that you would expect if that were the case

  Note: as this is a viewer of generic product that I can use as a template I use lastFrame etc. as opposed to the entry of the value in

  function initially () {}

  viewer_mc.gotoAndStop (1);

  }

  viewer_mc.addFrameScript (lastFrame-1, initially);

  2. it is the functionality for the autoplay_btn that will play through a rotation / return the Viewer to the initial view (front) of the product (fig. 1).

  autoplay_btn.addEventListener (MouseEvent.MOUSE_DOWN, autoplay);

  function autoplay (ev:MouseEvent): void {}

  var startFrame:Number = viewer_mc.currentFrame;

  viewer_mc.gotoAndPlay (startFrame);

  };

  3. it is the right key functionality, which once held, moves the clip to the next section via the function "rotateRight" based on the order "nextFrame. It loops back rounded up to the first image due to the 'viewer_mc.addFrameScript (lastFrame-1, initially)"script generated on the last frame of the clip you want.

  right_btn.addEventListener (MouseEvent.MOUSE_DOWN, rightDown);

  function rightDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stoprightDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateRight); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stoprightDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateRight);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stoprightDown); remove the mouse listener to the top

  }

  function rotateRight(e:Event):void {}

  viewer_mc.nextFrame ();

  }

  4. This is the feature of the left button, which once held, moves the clip on the framework of prev function «rotateRight' based on the «prevFrame» order And that's where the rub, because while it works to get the movieclip to frame 1, it loops round to the last image and continue to operate, as you want.

  left_btn.addEventListener (MouseEvent.MOUSE_DOWN, leftDown);

  function leftDown(e:Event) {}

  stage.addEventListener (MouseEvent.MOUSE_UP, stopleftDown); Wait for the mouse upward on the stage, in the case where the finger/mouse moved out of the button accidentally when they release.

  addEventListener (Event.ENTER_FRAME, rotateLeft); While the mouse is down, run the function check once each image according to the frame rate of project

  }

  function stopleftDown(e:Event):void {}

  removeEventListener (Event.ENTER_FRAME, rotateLeft);  stop the execution of the function check each image now that the mouse is in place

  stage.removeEventListener (MouseEvent.MOUSE_UP, stopleftDown); remove the mouse listener to the top

  }

  I guess that's probably my logic for this part that's really let me down - I can make a similar function in actionscript 2, but am trying to learn actionscript 3 just to evolve with the times in some way and a little hard. Again, this is only a few days!

  function rotateLeft(e:Event):void {}

  {if(thisFrame==1)}

  gotoAndStop(viewer_mc.totalFrames-1);

  } else {}

  viewer_mc.prevFrame ();

  }

  }

  Any help you can give me would be welcome. For an example of the effect I'm trying to achieve with the auto play button etc. I recommend:

  http://www.fender.com/basses/precision-bass/American-standard-precision-bass

  Here is a link to the file that I made using your code with the change, I have indicated to play the opposite.  See if it works as expected.  If so, try to see what is different in your.  If not, tell me what to do, it does not reach.

  http://www.nedwebs.com/Flash/AS3_loop_play.fla

• Draw the stop at the first image method

  I need to make an animated film flower using a bitmap tile. I use the code below, and write only the first image then stop, how can I get more images?

  createEmptyMovieClip("triangle",2);
  triangle.beginFill(0x000000,100);
  triangle.moveTo(width_map/2,height_map/2);
  triangle.lineTo(width_map/2+(height_map*Math.tan(angle)/2),0);
  triangle.lineTo(width_map/2,0);
  triangle.endFill();
  triangle._visible = false;
  
  attachMovie(elm_link,"elm",1);
  
  elm.setMask(triangle);
  
  sl_bmp = new flash.display.BitmapData(height_map*Math.tan(angle), height_map/2, true, 0x00000000);
  angl = 0;
  for (i=1; i<=slices; i++) {
       createEmptyMovieClip('elm'+i,10+i);
       this['elm'+i].createEmptyMovieClip('elm',0);
       this['elm'+i].elm.attachBitmap(sl_bmp,0,"always",true);
       this['elm'+i].elm._x = -height_map*Math.tan(angle)/2;
       this['elm'+i].elm._y = 2-(height_map/2);
       this['elm'+i]._x = width_map/2;
       this['elm'+i]._y = height_map/2;
       if (angl>0) {
            this['elm'+i]._rotation = angl;
       }
       angl += 360/slices;
  }
  function onEnterFrame() {
       elm._rotation += rotspeed;
       elm._x += transpeed;
       elm._y += transpeed;
       var tmp_bmp = new flash.display.BitmapData(height_map*Math.tan(angle)/2, height_map/2, true, 0x00000000);
       tmp_bmp.draw(elm,new flash.geom.Matrix(1, 0, 0, 1, -(width_map/2), 0),null,"normal",null,true);
  
       sl_bmp.draw(tmp_bmp,new flash.geom.Matrix(-1, 0, 0, 1, tmp_bmp.width, 0),null,"normal",null,true);
       sl_bmp.draw(tmp_bmp,new flash.geom.Matrix(1, 0, 0, 1, tmp_bmp.width, 0),null,"normal",null,true);
  
  }
  

  This is a typo and should be Elm

• How to go back to the first image of a directory

  Hello!

  I tried the HOME button, but nothing happened.

  How can I go to the first or the last image without pressing on for many minutes right or left arrow?

  Best regards

  'Ctrl-Home to go to the first image' or Ctrl-End works, if you are in the library Mode AND have enabled grid display. But it also to change only the display of grid, not the big picture on the background.

• * Flash animation loop but going back to the first image {want to hold on to the last image}

  I came across this article in loop animations = http://www.quip.net/blog/2006/flash/how-to-loop-three-times

  I am a novice with flash and just try to connect to some place ads and make it work for the first time.

  Everything worked for me in the article... the only thing I wanted to do, but you have not found that the answer to how do to stop the animation on the last frame after a loop is completed, instead of automatically return to the first image is?

  What is the most easy/most effective way for this?

  The shutdown script does not work... still goes back to the first image.

  For all my flash ads, imported FLV video... so I don't know if this is a feature for flv / video that auto-rewinds to first frame...

  Thank you very much, really appreciate any idea on it.

  The sooner you can take a minute to return best

  you add your video in the timeline.

  Add a stop() in the correct location works for me: create a new layer, insert a keyframe in this layer to the last video image and add a stop() in Control Panel actions.

• Thumbnail slideshow jQuery accordion begins with the first image, regadless of relaxation

  I created my lightbox on a separate page and it works fine.  I placed this lightbox even inside an accordion panel.  Now (only on the first click), it doesn't matter what thumbnail I click on, the first image appears.  If I close this image and click on a thumbnail, the image on the right is in place.  I need to get rid of this problem.  Any suggestions?

  You're my hero! I'll give it a try. And thanks for the video for reference as well.

• NEITHER Vision Builder: calculate the orientation of the component compared to the first image in degrees

  Hi all

  I have a question about a component of an aircraft. There are 9 images of the component with and without defects. I want to pray for some indications calculate the orientation of the item to the first image in degrees *.

  Any advice will be appreciated gratefully.

  Thank you guys

  PS: If you would like more details, please let me know and I will extend my post.

  
  

• flat sequence stops after the first image

  Hello

  I use USB-6218 to drive a current source and read the voltage at the terminals of shunt resistance in my circuit. In order to safely run things, I wanted to make sure that when I stop my blood 'on demand' vi, I updated the current 0. To do this, I tried to use the sequence of dish (find in annex vi), but my program never leaves the first image, even after it hit the stop on my front button.

  Can someone help me with this?

  Thank you
  Katarina

  Does not change the value of Stop inside the Subvi and the loop runs continually.

  -Suggest to check this example: http://www.ni.com/example/28769/en/

• 3 related issues: slow movement; the photos are all from the first image; and no sound from the soundtrack to the DVD downloaded.

  I put a DVD in my computer. It plays fine in Windows Media Player. When I transfer to Windows Movie Maker Live, three things happen: 1) the thumbnails are all the same - the first image. (2) the movement is slow. I tried it accelerates, but it is simply not the movement in real time - either too slow or too fast. (3) the soundtrack plays for a fraction of a second.

  What is the problem and how to fix it?

  I converted DVD to WMV format. This fixes the movement of the image and I can hear the music (not quite synchronized), however the thumbnails are still just the first image. In addition, every single feature that I blow (editing, effects, forwards, etc.) the picture freezes and yet the soundtrack plays again.

  ===================================
  It is normal that video to be the first image thumbs.

  Since it was a DVD... I guess it's a big project
  and the gel could be due to a lack of system resources.
  If you wait it can dissipate.

  Some video converters are better than others... Freemake
  maybe worth a try.

  It is also possible that your video driver may need an update.

  Verify that the video driver is problematic is to
  reduce the graphics hardware acceleration:

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  Good luck...

• Why when I put another image instead of the first image in tabletFirstTemplate logoImagePath it does not show in the browser.

  Mr President.

  If I want to change the image that I put first in the logoImagePath in tableFirstTemplate then this second image does not appear in the browser.

  But when I put the previous image that I put on the first time, this first image appear in the browser as usual.

  But any other image if I want to put in place the first image does not appear in the browser.

  It looks like bellows

  

  No reason for this behavior of the logoImagePath.

  Concerning

  Remove the deployment folder, restart the weblogic Jdeveloper/Integrated Server and try again.

  Refer

  Java ADF Webcenter UCM Weblogic SOA: ADF: clean your drs, SDM using Script file

  See you soon

  AJ