Only one task to be scheduled snapshots of several machines

Similar Questions

• Tasks under glass? I know I'm not the only one...

  

  I just buy my Apple Watch 30/03/16 and today I noticed these green spots under the glass and they weren't there yesterday? I did not get the wet watch and it works fine. I have reduced transparency and makes the stains disappear. I'm the only one who thinks it's ok or acceptable? Why should I have to disable the option installed by apple to make the sleep function properly? I did some research and see that I'm not the only one that this has happened? Do I have to send the watch back for a new or what is happening for all watches Apple? I really like the watch I was wondering what everyone else thought?

  Hello

  It's perfectly normal - it is not a problem or an error.

  You are referring to an intentional visual effect that is designed to repeat the contents of the underlying screen.

  The effect appears every time that see you some screens that sit on top of the other, for example:

  -For displaying Notification Center (dragging down when you view the screen of the watch face);

  -For reading a notification;

  -For the opening of eyes (by sliding upward when you view the screen of the watch face).

  -By the use of Siri.

  The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts. It can serve as a subtle, useful reminder that you are viewing - for example - looks or Notification Center, each of which can be exited by sliding downwards or upwards on the screen.

  If you want to disable this feature:

  -On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.

  This setting stops the effect to be shown on the display of your watch.

• I get a dialog box with a copy of firefox is open and that only one copy of firefox can be opened simultaneously.

  I get a dialog box with the following: "a copy of firefox is open and that only one copy of firefox can be open at the same time."

  I don't see where firefox is open.

  How back in firefox so that I can read the links that are in my emails?

  Thank you.

  Sometimes when the FF closes, no not all stops correctly.
  On Windows, start the Task Manager (other systems may have
  different names and / or commands). Select the process.
  Look towards the bottom of the list for Firefox. Click right and then click end task.
  If this problem keeps coming, ask for help more.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• Cannot cannot run .exe file, but only one user.

  I have 4 users put in place in Windows XP Media. Only one user has the problem that windows does not let him run the .exe files. get error asking what program I want to use to open this type of file. 3 other users do not have a problem. How do I fix this one

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the exact error message?

  Method 1:
  Run the fix it and check.
  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  Method 2:
  You can try the steps in the link and check if it helps:
  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 3:
  If the steps above fail then you can try the steps in knowledge base article and check.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505#appliesTo

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

• Why I can't install adobe get: 'only one instance of this application can run.

  Hello, can someone help me with the installation of Adobe Flash Player?

  I tried too much to install but get this message "that only one instance of this application can run.

  I see all the Adobe apps, I tried to remove all of the adobe files and still nothing.

  I opened the Task Manager and try to complete the process associated with Adobe manually by selecting 'End process' and then try to install it, but nothing happened.
  I tried "clean boot", but none worked. I downloaded the "Adobe unistaller' official page and"the latest version of flash player"but it does not work!

  I also went on the Adobe Web site and it says this error message was due to the flash application, but I deleted all the files in and still nothing.

  I have firefox.

  I suggest you to check with Adobe on this point, its something specific request.

• Cannot install Flash Player as "only one version of this application can run.

  I had problems with Flash Player earlier today and decided to uninstall it (from Windows 7) and reinstall from scratch.  I uninstalled and tried to reinstall it but now I get the following message appears: cannot install Flash Player as "only one version of this application can run" I tried to uninstall I checked to see if there was still a program to install but it does not exist. I checked my files in Windows and there are several files called Install_Flashplayer _16x32... files. I assume that they are created whenever I tried to install Flash Player.  I thought to delete many files install FlashPlayer but decided to ask for help before taking this step.

  Browser: Firefox 35.0.1

  Windows 7 Home Premium

  64 bit OS

  I managed to install Flash Player and it works. I deleted all the installation files except one who did not want to be deleted, then I started to install Flash Player, until I got the message about the conflicting demands. I then used the Ctrl + Alt + Delete to open the Task Manager, then closed all tasks except the Flash Player one. Flash Player finished the installation. Then, I opened a TV Player in Firefox and was able to play a program that requires a Flash Player.

  Why don't I have to use the Task Manager to close applications. I don't remember the last time that I used it ut think that it was a year ago, when my computer would not shut.

• Problem with headphone selection if the table has only one row

  Hi all
  
  I have developed a table in which I use selection listener to perform a task when a line is selected.
  It works fine when I have more than 1 row in the table, but when I did that one line in the table, the listener of selection do not call the corresponding method in the bean.
  I understand this selection event is raised only when the line is changed, but in the case of use when only one line is there, what do I do to make the listener of selection work?
  
  The selection listener I wrote the code to make the line selected as current line and perform the required task.
  
  Please suggest a way out of this situation.
  
  Thanks in advance.

  Hello

  try to remove this table attr

  selectedRowKeys="#{bindings.xxx_VO1.collectionModel.selectedRow}"
  

• move only one disk per storage vmotion

  Hello

  We currently have the problem that we have to move only one disk with Storage Vmotion. I found the 'move-VM"for this cmdlet, but I found no option to move single vmdk and not the whole VM?

  Can someone help me.

  Thank you

  Christian

  There seems to be some problems with the RelocateVM_Task method.

  See also Powershell sVmotion number.

  After some trial and error, I discovered that when you give the data store target twice (in VirtualMachineRelocateSpecDiskLocator object and the VirtualMachineRelocateSpec) the sVMotion seems to work.

  $vmName = 
  $vmDisk =                # Ex "Hard Disk 2"
  $tgtDS = 
  
  $vm = Get-View -ViewType VirtualMachine -Filter @{"Name"=$vmName}
  foreach($dev in $vm.Config.Hardware.Device){
       if ($dev.DeviceInfo.Label -eq $vmDisk){
            $diskId = $dev.Key
       }
  }
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  $diskspec = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $diskspec.Datastore = (Get-Datastore -Name $tgtDS | Get-View).MoRef
  $diskspec.diskId = $diskId
  $spec.Disk = @($diskspec)
  $spec.Datastore = $diskspec.Datastore
  $spec.Host = $vm.Summary.Runtime.Host
  
  $task = Get-View ($vm.RelocateVM_Task($spec, "lowpriority"))
  while($task.Info.Status -eq "running" -or $task.Info.Status -eq "queued"){
       $task.UpdateView()
       sleep 5
  }
  

• Only one type can be imported. package. Class resolves in one package

  Hello
  
  I did a class for the database connection named ConnectionClass.class.
  
  JSPS in public_html directory works very well with import and the session variables.
  
  but jsp in public_html/subdirectory is unable to import this class and also unable to access session variables.
  
  I deploy this class under public_html/WEB-INF/classes/directory.
  
  and also in a vidyabharti.jar of jar in the directory public_html/WEB-INF/lib file
  
  I am importing into JSP pages as
  < % @ page import = "vidyabharti. "ConnectionClass, java.sql. *" % >
  
  but I am getting following error
  
  An error occurred at line: 6 in the generated java file
  Only one type can be imported. vidyabharti. ConnectionClass resolves in one package
  
  An error occurred at line: 110 in the jsp file: welcome.jsp
  ConnectionClass cannot be resolved to a type
  
  109: < %
  110: ConnectionClass cs = null;
  
  
  An error occurred at line: 115 in the jsp file: welcome.jsp
  ConnectionClass cannot be resolved to a type
  CS = new ConnectionClass();
  
  
  
  I use Tomcat 5.5.28.
  
  Please help me.

  Hello

  It's a problem possible whith your distribution of tomcat JDT compiler version.
  You know that jasper is the engine that transform the jsp to classes and to reach this goal using a jdt compiler or the Ant's javac compiler task.

  First check that the JDT compiler class is present in the trace for the exception that you have.
  If this is the case follow the steps in the tomcat documentation in in order to use the compiler to Ant.

  http://Tomcat.Apache.org/Tomcat-5.5-doc/Jasper-HOWTO.html

  Apache Ant, which was used in previous versions of Tomcat, can be used instead of the new compiler instead simply by deleting the common/lib/jasper-compiler-jdt.jar file, and place the last distribution of Ant's ant.jar file in common/lib folder. If you do this, you must also use the "javac" to catalina.sh argument.

  If you check the code of the compilation tomcat context seems you can do the same thing, without removing any file, by setting the parameter of compilation of the JspServlet to a value arbitrary diferent of null value.

  Try this alternative by editing the %TOMCAT_HOME%\conf\web.xml file
  and set the attribute of the compiler as follows

      
          jsp
          org.apache.jasper.servlet.JspServlet
          
              fork
              false
          
          
              xpoweredBy
              false
          
          
              compiler
              Ant
          
          3
      
  

  If it works for your problem, we can check the jdt code and maybe make a correction.

  Best reggards,

• Only one voting group

  Hello
  
  I design a human task where to do a vote of Group of users to a single group. If I select the voting group, group-> 'Group name', the task is sent to the users in the group. One of them claims that he and responds to the entire group. Not what I want.
  What I want is, that the users in the group will receive the task, for example, 70% agree with the vote and the human task is complete. This behavior occurs when I select voting group and manually add all the users in the group. How can I achieve this?
  
  Thank you
  João

  Tasks can be assigned to users and groups. In a group vote, if you assign the task to a group, there is only one mission, which is to the group.

  If you want to create a group for each user task in the group, assign users to the group task dynamically using the extension function, ID: getUsersInGroup(groupName, direct, realm). Please see c.7.8 section in the guide to the developer for the details of this function.

• I have 2 Mozilla Firefox on my desktop. They are both version 41.0.2 - in my installation and delete I find only one. How can I delete one of them?

  I tried to update to Mozilla Firefox and I had another icon on my desktop. Now, I have Mozilla Firefox 2 and they are both Version 41.0.2. They are both exactly the same thing when I open the. I see only one on my add/remove program location so I won't delete it because I could delete them both. Can you help me?

  You can remove one of the office shortcuts if both point to the same firefox.exe in the same Firefox program folder.
  You can keep the one with the correct version information where the other is an older version of Firefox.
  Note that Firefox 42 will come out next week (Tuesday).

• Am I the only one to have a problem with the zoom is constantly disabling feature?

  Running iOS on a 6Plus 9.3.3, I continue to turn on zoom and nearly every day he himself turns OFF. Am I the only one experiencing this bug?

  I have not read this "bug" here before, and I read these forums almost every day. I don't know what to offer another standard "fixed".

  Force restart. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  The system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  If the steps above do not help, you may need to test in an Apple store.

• How to stop firefox quiting last tab (when only one tab is open) without warning?

  I want to turn off ctrl + w when only one tab is open so that when only one tab is open, and if I press ctrl + w by mistake he shoud warn me before closing the browser

  You can set the pref browser.tabs.closeWindowWithLastTab to false on the topic: page config to prevent the closure of the last tab to close this window and display a close button if only one tab is open.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• I don't know what happened, but I see not all email accounts, but only one of them. The rest are not displayed

  All accounts are added to the Thunder birds, but now I only see messages from them - Olga messages.

  I can't spend another profile, then maybe that I clicked on a button and it display only one profile.

  Sorry, but English is not my mother tongue, but I hope it's understandable)
  Thank you!

  In the menu bar select view-presentation-folder pane

  No menu bar? Press the ALT key.