Only Premiere Pro CS4 No 5.1, as stereo DolbyDigital surround sound!

Similar Questions

• Only Premiere Pro CS4 NO Audio to Render

  Windows Ultimate

  CS4 Premiere Pro

  My image is 1920 x 1080

  My Audio is MP3s (3) and wave (2)

  I sent to SOUL for encoding verious different formats, but NO Audio in my final output

  I tried to see and monitor the audio tracks using the video editor programs, but the audio track is just a solid line (no wave)

  While back, I have installed the Audio of Roxio drive, would that be the problem? I went to the control panel and see if I can uninstall it, but can't see an option to uninstall.

  Or is it possible that I could choose the audio drivers or replace default themback!

  Yes, my system is up to date

  Any help will be greatly appreciated!

  You can mix certainly files source Mono, stereo and even 6 channels. The choice of a master in the project, or sequence, will determine what Clips are mixed down for.

  Now, IIRC, you have Source of MP3 files. Those who can be problems and unless there is a tiny SFX file, I always convert those into PCM/WAV 48 kHz 16-bit at the hearing, but the big, little, free Audacity it will also.

  Good luck

  Hunt

• Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  Why the Premiere Pro CS4 is only 10 seconds of .psd layers Photoshop CS4?

  I have a second clip 24 I have stratified in Ps and when I import the psd in Pr THE SEQUENCE IS STILL ONLY 10 SECONDS!

  How can I change this?  Why does this happen?  I really need to know as soon as possible.  I have a video project due this Wednesday (certainly that's an AV class where I learn just PR.  "But I can learn VERY QUICKLY!)

  Thanks for your help.

  -OSXniCKels

  Just in case I wasn't clear in my last line ' just click-and - drag on the tail of your.» PSD to set the desired time,' once you have imported your. Just PSD (for example, images), you can drag in the timeline panel, click and drag on the right margin (the tail) and stretch his time because it takes.

  Now, if you have imported as a sequence, open the timeline of the sequence and do the same thing.

  Normally, I will put my Edit > Preferences > again I think will be applicable, make my Import, and then with the Info Panel, just change the duration in office.

  Good luck

  Hunt

  PS - Welcome to the forum.

• No video in Premiere Pro CS4! Help!

  Hi, I had problems with Premiere Pro CS4. The imported video playback is completely black the moniter to source both the moniter of sequence. The audio plays perfectly fine, also when I change the display mode to one of the other modes they run also. It's just the composite video display is not working. I have the latest video drivers and first worked before. Y at - it something I am doing wrong is the first pro. I have only the 30 day trial and I reinstalled and updated. Please help before the 30 days has elapsed.

  Thank you

  Hello Vistafan01,

  I suggest you only to contact Adobe for problems with see video in Windows Vista on the first Pro.

  You can also watch the thses items fo rpremire Pro.
  http://PremierePro.Wikia.com/wiki/category:CS4

  If this does not help, I would say that you post in the Adobe Forums.
  Click here to post.

  It will be useful.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• REINSTALL PREMIERE PRO CS4

  MY QUESTION: WHAT to DO FOR FREE AND end UP re-installing. MERCI.

  
  

  SUCCESSFUL FORMER INSTALLATION OF PREMIERE PRO CS4: 2012 (SAME THIS LAPTOP).

  
  

  1/ HARD DRIVE WAS NOT ABLE TO WORK DUE TO CAPACITY USED ON PART C: ONLY 200 MB LEFT 80 GB. MAINLY DUE TO THE SIZE OF THE SOFTWARE FIRST PRO WITH THE HELP OF 9, 36 GB.  IMPOSSIBLE TO EXTEND THE SIZE OF HD PART C: MORE THAN 80 GB.

  
  

  2 / UNINSTALL PREMIERE PRO CS4 DECIDED BY ME TO FIND SPACE ON THE PART C.

  FOLLOWED BY UNINSTALLATION PROCEDURE: IMPOSSIBLE WITH THE PANEL, CS 4 DELETED C: PROGRAMS SOFTWARE WITH CODE NUMBER ASKED / STILL APPEAR AFTER ERASING ON PANEL OF CONFIGURATION/PROGRAMS AND FUNCTIONS FOR 9, 36 GB. AFTER UNINSTALLING 2 GB LEFT... SO LITTLE SPACE THAT I DECIDED TO CHANGE THE HARD DRIVE.

  
  

  3 / CHANGE OF HARD DISK: 240 GB SSD INSTALLED WITH THE MIGRATION OF THE SOFTWARE (INSTEAD OF HD THANKS). EVERY THING OK.

  
  

  4 / re-SETUP ON SSD OF PREMIERE PRO CS 4 FROZEN AFTER ACTIVATION "" AUTOPLAY. "." EXE' TO INSTALL ADOBE DVD N ° 1. MESSAGE MENTIONS: "AN ERROR OCCURRED DURING the installation of this DO CAN CONTINUE? ." " CONTACT THE Adobe CUSTOMER SUPPORT DEPARTMENT".

  CV IN ENGLISH
  

  I'm looking FOR a REINSTALL PREMIERE PRO CS4 ON THE SAME PC I CHANGE HARD DRIVE TOO SMALL (PARTITION C :)) POUR DO FON SELECT CS4 (REPLACEMENT HDD SSD rap). I HAVE A CODE WHEN UNINSTALLING BUT I DON'T HAVE IT. WHEN LEN () OF THE PRODUCT ON MY PROFILE, WE ME SAID THAT THIS NUMBER ALREADY EXISTS. AFTER THE VERIFICATION OF THE WINDOW SYSTEM. I RECEIVE MESSAGE FOLLOWING: ERROR DURING THIS CANNOT CONTINUE CONTACT SERVICE CLIENT INSTALLATION.

  HAVE YOU EVER ENCOUNTER THE SAME PROBLEM, THANK YOU FOR YOUR HELP.
  

  All uninstall cs4.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  try to install again.  If you use an installation cd/dvd, copy the contents of the drive in a desktop folder and install from this directory.

• I would like to know if it is possible to change my version of WIN of Premiere Pro CS4 for the MAC platform.

  I would like to know if it is possible to change my version of WIN of Premiere Pro CS4 for Mac.

  Thank you for any information.

  N ° platform Swaps apply only to the last version that was CS6. Apart it's a moot point - CS4 is not compatible with the current versions of Mac OS X, anyway.

  Mylenium

• Premiere Pro CS4 dynamic link to Encore CS4

  I transferred a still CS4 Premiere Pro CS4 project via dynamic link.  I tried to play the scenario but only the sound plays video remains still each time that the marker is placed on the timeline, but the marker moves.

  Can anyone suggest what is the problem?

  Stephen Terry

  I do not understand: the marker moves?

  I leave Dynamic Link out of the picture.

  Export of first with a "Preset" mpeg2-dvd. You can change the speed of transmission a little upward.

  Import these two files (audio and video) in again.

• Premiere Pro CS4 hungs on importing or opening files

  Hello!

  I have a serious problem with Premiere Pro CS4. I have install on Windows 8, everything goes well. I create the first project and import mov files. First time I tried h284 Canon DSLR raw file. He played really bad. Secondly, I try AVID DNxHD mov, plays too slow, but everything is normal. But shortly after the first absolutely freezing. I restart, try to import the file or open the project with imported files (no matter what codec it is), it freezes again as before. And nothing helped. I tried to reinstall it about 5 times, it has no effect. What is c? Please, help me!

  P.S. I don't know it worked on Windows 7 with MOV of the Canon camera, but I was working with other codecs.

  Update. I found this problem described appears only with files DNxHD. regular H.284 causes different problem - during the first window loses focus (when I go to explorer, for example) first crashes, it's the window disappears and only strange red line stays on the screen. WTF?...

  Post edited by: Anri Orlow

  Need someone to help... more information please click on these links and provide the requested information

  -Information FAQ http://forums.adobe.com/message/4200840

  -Issues effective http://forums.adobe.com/thread/416679

  -How to find http://forums.adobe.com/thread/419406 help

  In addition, you may need to run CS4 in Windows XP compatibility mode

  Search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US to get help from windows procedures

• Adobe Premiere Pro (CS4) does not

  My Adobe Premiere Pro CS4 crash on, gives me the message "Adobe Premiere Pro does not." I tried to cut, paste and republication of my clips links, which does not work. I seem to have trouble keep the other projects that are open as well. I have a lot of space on my C drive, as well as the external drive is on. (My recovery disk has only 1.15 GB of 14 GB of free, but I heard that it is normal to be complete).

  I saw on another forum, who said that the problem may also be electricity. I am in China right now so the voltage is different, but the program worked with my laptop and power cord for a while before she started smoking on me. (Also, I tried opening Prime projects just work off the battery voltage and they always crashes.)

  Any suggestions?

  Without taking into account the recovery drive, please give us complete specifications. on your computer, including the other HARD drives. The more details, the better it is.

  Then, list your settings and sequence/project of your Source footage.

  Good luck

  Hunt

• Adobe Dynamic Link won't work - Premiere Pro CS4 to After Effects CS4

  Hello

  I edited a video with a date limit, I am importing a sequence of Premiere Pro CS4 to After Effects and changes in After Effects. I'm able to import the sequence of Premiere Pro in After Effects using Dynamic Link, but I'll go back to Premiere Pro and nothing has changed. I then export the minute 21 long video in After Effects and which takes about 12 hours, I can't afford. I don't know what I am doing wrong, until I imported to the AE timeline, while I was in Premiere Pro I right click it and select - original Edit. He took me to the .mov that I imported - since it is a roll forward. I learned how to use dynamic links to this tutorial-

  http://TV.Adobe.com/watch/learn-CS4-production-premium/using-dynamic-link/

  Initially when the dynamic link didn't work I thought it was because I cut the sequence imported Premiere Pro into After Effects because I was followed by movement. When you import a sequence Premier Pro can cut you it into different layers in After Effects?

  I import a sequence of Premiere Pro CS4 to After Effects

  That does not create the type of link you want here.  In this case, changes to the PP would be present in AE.  You want the opposite.  (And you can only go one way, not both).

  http://help.Adobe.com/en_US/PremierePro/4.0/WS725e431141e7ba651172e081238226cdf5-8000.html

• Premiere Pro CS4 - flickering chronology

  I just installed Premiere Pro CS4. I used CS3 without any problems. In the editing window, I noticed that the upper part of the chronology blinks whenever I play back video from the timeline. The top of the timeline where it shows you the green or red lines for renders bar or not video cooked is the section that blinks (the line all the time). I'm not having video playback issues. No flcikering video - only the top bar of the timeline. The flicking of the chronology is drivnig drives me crazy. Someone at - it expereinced this problem? Could this be a problem of resourse memory with CS4?

  I hope someone can help.

  System:

  Pentium Dell quad processor

  2 GB of ram

  Card NIVIDA Gforce Grafics

  Thank you

  Mark

  You set the Windows classic desktop. Its a thing Aero.

• Slow playback in Premiere Pro CS4 (how to reduce res preview?)

  Hi everyone, I was just wondering how to reduce the resolution of the reading/preview while3 editing in Premiere Pro CS4? I'm editing 720 p video (.mov format, that's what my camera takes pictures, so I don't think I can change that). All I see when I right click in the source monitor is "quality > high, rough, automatic. Is there anything else that I can choose? (kind of in aftermath, where you can set it to 1/2, 1/4, etc.). I searched the internet for the better part of the day and what I found is that 'quality' menu I mentioned earlier.

  It is always very slow to look on the 'project', and it doesn't look like it's much more of a difference in quality. Now, my laptop isn't exactly the rendered beast that I wish it were, but it can handle 720 p [slowly] in after effects so I think it should work first too.

  Thank you!

  PS: Anyone of you experts think it would be a good computer for NLE / rendering of effects?

  http://www.TigerDirect.ca/applications/SearchTools/item-details.asp?EdpNo=7192259 & SKU = B69-1277

  CS5 offers specific options like 1/2 and 1/4.  Earlier versions offered only full, project and Auto.

  A new computer is probably in order.  Your link isn't a bad option.  (Even if you need to add at least two drives more.)

• Premiere Pro CS4 video fills the whole frame.

  My Windows Movie Maker has stopped working so I bought it and I regret it completely. WMM is so simple and straightforward. I don't want a software that takes a genius to use. Even I could design a better software.

  In any case, for some reason when I import a video on my project it fills the screen. It is black boarder thick around her. I did research it and I saw a lot of things on the elongation or something like that. But I'm not a computer genius and adobe is expected of course as everyone else so I was wondering if someone could help me. Thank you.

  Heres a pic so it can help.

  [IMG] http://I54.Tinypic.com/jpvjhx.jpg [line]

  Welcome to the forum.

  When its assets are either zoom-in, or have black bands around them, in the timeline, it is usually because the predefined sequence/project does not have the 100% source footage.

  In CS4, when you create a new project, they will set some preferences global and then invited to create a new sequence (chronology). It is here that we will need to know the full specs. their source files, and then select a predefined sequence to match these assets 100%. There are many Presets and then one 'special', the desktop Preset. What makes this 'special', is that you can set almost all the parameters for costume/game, such as the size of the image (this is where you are off), FPS, etc.

  If you can tell us the complete specifications. of your source footage, anyone can tell you exactly what Preset to choose, or how to customize the desktop Preset to match. That will fill your frame perfectly.

  PrPro from CS4 has the ability to have different sequences for different sequences, in the same project.

  Now, WMM is well enough designed to deal with standard WMV images, is very limited on the one hand, but on the other hand, simple to use - many, many fewer choices to make. It's 'standard', or nothing.

  When you have explored the power of PrPro and get used to the implementation of your footage, you will come to love him. The 'power' is intoxicating, and operations will become second nature.

  I highly recommend a great book, Adobe Classroom in a Book for Adobe Premiere Pro CS4, Adobe Press. The author you will return you though first the concept of using a NLE (of Non-linear editing), then give you a tour of GUI (Graphical User Interface) program. Then, although the use of resources and projects, you will return the reader through all aspects of the process of with PrPro CS4 edition. When you are finished, there will be very little, that you will not have been exposed to. Curt spends a good part of the time by saying the drive all on the 'why' and not only the "how".

  PrPro-Wiki has a great FAQ section on how to do most of the things in CS4 and should be bookmarked.

  Believe me, the operation will change from 'rocket science' to 'second nature '.

  Good luck

  Hunt

• Sync during compression HD FLV and F4V in Premiere Pro CS4

  Hello.  I am trying to create messages of public interest for You Tube initially created with a small device that produces Quicktime HD files.  For YouTube they do not have to be perfect, but that's what I'm working with.  My computer has only 4 GB of ram so I can't watch the video to test synchronization because it gives just a slide show when editing.  He never does anything, but a slide show with HD video.

  When I watch the original unedited Quicktime file synchronization was distant.  When I visited the original file in FLV and F4V formats, just to test the synchronization it is PERFECT.  Then I edited the first video from this session and FLV used and the timing was PERFECT.  So I do the second video synchronization, tested on the original film and its PERFECT.

  So I thought it was okay to continue.  Everything was perfect after that first made the raw images. The first video worked, right? Synchronization of the raw images of the second video has been fixed, right?

  Now that I spent all the time to edit the 2nd video, sync is TERRIBLE.  I have no idea why.  F4V was worse than FLV, but none are ideal for 2 video.  So I guess I have two questions:

  (1) what format should I use to upload to YouTube which does not give me a unusable timing problem

  (2) is there something I can do to see continuous synchronization in Premiere Pro CS4 without updating my equipment?  I use Vista 64 bit, 4 GB of ram, dual-core intel.  What I have to do a significant hardware upgrade just to get HD video do not make a slideshow during first execution?

  Thank you!

  AVI file to the private mssg link... 1 gigabyte, takes about 30 min to DL - look and tell me if synchronization is better or worse you know... or the same thing... without you looking at this file and checking against your own there would be no way of KNOWING what (compared to what you met).

  IF THE AVI IS BETTER... What are the steps

  project settings and description of the measures shown below...

  CineForm (neoscene) can handle that sort of thing of conversion, but I do not have this program... most of this will be explicit from the images...

  

  

  

  Here's the info from mediainfo avi export

  

  below is the description of steps

  -------------

  easyShare measures taken

  his program (I used soundforge) allows re - sample 16 kHz sound for wav file (wav pcm) to 48 kHz and 32 bit floating point.

  record in stereo or mono (stereo may turn into 2 mono channels when they are imported in preview)

  Import original mov file to the new project, untie her, remove its import wav and put on wav chronology... link to the video.  I increased the volume on an audio file with conversion just for my own satisfaction... you can do what you want the audio file also (re: filters etc)

  The file size will be HUGE... as you're now away from the advanced mpeg 4 HIGHLY compressed format of your original footage...

  However, it is OK to HAVE BYTES COUNT FILE AT THIS POINT HUGE...

  You can then IMPORT the AVI file that you exported in first for your mounting--(je commencerais nouveau projet pour cela) with very little "loss" of original quality - most of the humans would be able to tell any difference between the quality of the original and this AVI file... (I can't).

  After you change the avi file or files to export as flash or anything else you want...

  ---------------------

• Premiere Pro CS4 SDK - exporter plugin

  Premiere Pro CS4 SDK

  Hello
  I ran the sample exporter SDK CS4 project and it never seems to join the case "exSelExport" the plugin's main entry. Instead, after clicking on "OK" in the window of the exporter, first pro cs4 selector returns = 14 and after nothing happens (because there is no place of 14) host selector gives 8 (EndInstance). After that, Adobe Media Encoder queue is started. That seems like a flaw for me since I am not able to handle the export as I want (in my case, I want to use 3rd party exporter for images, news, audio/video, etc.) in the case of exSelExport. Is it a typical workflow for Pr CS4 pass the straight Media Encoder compression/rendering? Under what circumstances can I enter exSelExport when I'm ready to export a clip? I use Pr Pro CS4 4.0.0.

  Hey Petro,

  In CS4, the only export is through Media Encoder.  So, you will need install your exporter in a place where the two Premiere Pro and Media Encoder will load it.  The MediaCore folder is the recommended location, which Vista32 on CS4 will be something like:

  C:\Program Files\Adobe\Common\Plug-ins\CS4\MediaCore

  For more information, see Installation of plug-ins on page 32 of the CS5 SDK Guide.

  Kind regards

  Zac